netdev - [PATCH next 3/6] be2net: Create single TXQ on BE3-R 1G ports

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 1 Oct 2013 15:59:58 +0530
From:	Sathya Perla <sathya.perla@...lex.com>
To:	<netdev@...r.kernel.org>
Subject: [PATCH next 3/6] be2net: Create single TXQ on BE3-R 1G ports

From: Vasundhara Volam <vasundhara.volam@...lex.com>

On BE3-R 1G ports (identified by port numbers 2 and 3) the FW cannot properly
support multiple TXQs. This also makes the number of RX and TX queues symmetric
as only a single RXQ is available on 1G ports.

Signed-off-by: Vasundhara Volam <vasundhara.volam@...lex.com>
Signed-off-by: Sathya Perla <sathya.perla@...lex.com>
---
 drivers/net/ethernet/emulex/benet/be_main.c |   11 ++---------
 1 files changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 4cb2ac7..be12987 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2967,8 +2967,9 @@ static void BEx_get_resources(struct be_adapter *adapter,
 		res->max_vlans = BE_NUM_VLANS_SUPPORTED;
 	res->max_mcast_mac = BE_MAX_MC;
 
+	/* For BE3 1Gb ports, F/W does not properly support multiple TXQs */
 	if (BE2_chip(adapter) || use_sriov || be_is_mc(adapter) ||
-	    !be_physfn(adapter))
+	    !be_physfn(adapter) || (adapter->port_num > 1))
 		res->max_tx_qs = 1;
 	else
 		res->max_tx_qs = BE3_MAX_TX_QS;
@@ -3010,14 +3011,6 @@ static int be_get_resources(struct be_adapter *adapter)
 		adapter->res = res;
 	}
 
-	/* For BE3 only check if FW suggests a different max-txqs value */
-	if (BE3_chip(adapter)) {
-		status = be_cmd_get_profile_config(adapter, &res, 0);
-		if (!status && res.max_tx_qs)
-			adapter->res.max_tx_qs =
-				min(adapter->res.max_tx_qs, res.max_tx_qs);
-	}
-
 	/* For Lancer, SH etc read per-function resource limits from FW.
 	 * GET_FUNC_CONFIG returns per function guaranteed limits.
 	 * GET_PROFILE_CONFIG returns PCI-E related limits PF-pool limits
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html