netdev - Re: [PATCH] net: add init-regs for of

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 18 Feb 2014 20:00:03 +0300
From:	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To:	Mark Rutland <mark.rutland@....com>,
	Ben Dooks <ben.dooks@...ethink.co.uk>
CC:	Florian Fainelli <f.fainelli@...il.com>,
	netdev <netdev@...r.kernel.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	Linux-sh list <linux-sh@...r.kernel.org>,
	David Miller <davem@...emloft.net>
Subject: Re: [PATCH] net: add init-regs for of_phy support

Hello.

On 02/18/2014 02:54 PM, Mark Rutland wrote:

>> [snip]

>>>>> - fixing up some design mistake?
>>>>> - accounting for a specific board design?

>>>>      Kind of both. This was invented to defy the necessity of having platform
>>>> fixup in the DT case (where there should be no board file to place it into).
>>>> I have already described that platform fixup necessary on the Renesas
>>>> Lager/Koelsch boards where the LED0 signat is connected to ETH_LINK signal
>>>> on the SoC and the PHY reset sets the LED control bits to default 0 which
>>>> means that LED0 will be LINK/ACTIVITY signal and thus blink on activity and
>>>> cause ETH_LINK to bounce off/on after each packet.

>>>>> In any case a PHY fixup would do the job for you.

>>>>      Not in any case. In case of DT we have no place for it, so should invent
>>>> something involving DT.

>>> How is DT different than any machine probing mechanism here? The way
>>> to involve DT is to do the following:

>>> if (of_machine_is_compatible("renesas,foo-board-with-broken-micrel-phy"))
>>>              phy_register_fixup(&foo_board_with_broken_micrel_phy);

>> Oh yes, but now I have to do that for Linux, for $BSD, and for
>> anything else I want to run on the device. I thought dt was meant
>> to allow us to describe the hardware.

> It does allow you to describe the hardware. Arbitrary register writes
> aren't a description of the hardware, they're a sequence of instructions
> that tells the OS nothing about the hardware and limit the ability of an
> OS to do something different that might be better.

> It's already the case that the OS has to have some knowledge of the
> hardware that's implicit in a binding. We don't expect to have to
> include bytecode to tell the OS how to poke a particular UART when it
> can figure that out from a compatible string.

>> If this is the case, let's just call this linuxtree and let everyone
>> else get on with their own thing again.

> This doesn't follow at all. Any OS needs to have some understanding of
> the hardware it will try to poke. Describing a specific sequence of
> writes in a DT is no more operating system independent than identifying
> the hardware and expecting the OS to have a driver for it. The
> requirements aren't any more suited to an individual OS in either case.

>> See also comment below.

>>> If your machine compatible string does not allow you to uniquely
>>> identify your machine, this is a DT problem, as this should really be
>>> the case. If you do not want to add this code to wherever this is
>>> relevant in arch/arm/mach-shmobile/board-*.c, neither is
>>> drivers/net/phy/phy_device.c this the place to add it.

>> So where should it be added? If we keep piling stuff into board files
>> in arch/arm.... then we're just back to the pre-dt case and going to
>> keep getting shouted at.

> The general trend has been to allocate new compatible strings for
> components and let individual drivers handle this.

> As far as I can see your case doesn't involve any components external to
> the PHY, so should probably live in a PHY driver. The PHY can have a

    It does involve LEDs which should function in the way described by their 
labels, and it does involve SoC for which ETH_LINK signal should remain stable 
and not bouncing after each packet.

> specific compatible string with the generic string as a fallback (if it
> works to some degree without special poking).

    It can but that doesn't solve this issue in any way. The issue is board 
specific, not only PHY specific.

> I don't see that we need anything board-specific.

    Did you read the text substantially above this in this mail for more 
complete description of the issue? We're trying to emulate the PHY *platform* 
fixup here which didn't belong with the PHY driver.

[...]

> Cheers,
> Mark.

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html