netdev - Re: macvtap performance regression (bisected) between 3.13 and 3.14-rc1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Sat, 01 Mar 2014 20:21:50 -0500
From:	Vlad Yasevich <vyasevich@...il.com>
To:	Christian Borntraeger <borntraeger@...ibm.com>, vyasevic@...hat.com
CC:	"David S. Miller" <davem@...emloft.net>,
	Jason Wang <jasowang@...hat.com>,
	"Michael S. Tsirkin" <mst@...hat.com>, netdev@...r.kernel.org,
	KVM list <kvm@...r.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: macvtap performance regression (bisected) between 3.13 and 3.14-rc1

On 03/01/2014 02:27 PM, Vlad Yasevich wrote:
> On 03/01/2014 06:15 AM, Christian Borntraeger wrote:
>> On 28/02/14 23:14, Vlad Yasevich wrote:
>>> On 02/27/2014 03:52 PM, Christian Borntraeger wrote:
>>>> Vlad,
>>>>
>>>> commit 6acf54f1cf0a6747bac9fea26f34cfc5a9029523
>>>>     macvtap: Add support of packet capture on macvtap device.
>>>>
>>>> causes a performance regression for iperf traffic between two KVM guests
>>>> on my s390 system. Both guests are connected via two macvtaps on the same OSA
>>>> network card.
>>>> Before that patch I get ~20 Gbit/sec between two guests, afterwards I get
>>>> ~4Gbit/sec
>>>>
>>>> Latency seems to be unchanges (uperf 1byte ping pong).
>>>>
>>>> According to ifconfig in the guest, I have ~ 1500 bytes per packet with this
>>>> patch and ~  40000 bytes without. So for some reason this patch causes the
>>>> network stack to do segmentation. (the guest kernel stays the same, only host 
>>>> kernel is changed).
>>>>
>>>> Any ideas?
>>>
>>> I am looking.  It shouldn't cause addition segmentations and when I ran
>>> netperf on the code I didn't see any difference in the throughput.
>>
>> Dont know if the different bytes/packets ratio is really the reason or
>> just a side effect. As a hint: the underlying network device does not support
>> segmentation, but this should not matter for traffic between to guests.
> 
> Could you post 'ethtool -k' output for both lower-level device and the
> macvtap device?
> 
> Thanks
> -vlad
> 

Ok.  I think I see what's happening.  Since you turn off offloads on
lower device, that's propagated to macvlan device.  As a result, when
when we call dev_queue_xmit on the vlan->dev, we end up segmenting since
lower level says it does support segmentation.

One way to fix this is to never disable offloads on macvlan.  macvlan
will always try to use __dev_queue_xmit() with it's lower device, so any
segmentation can happen there.

-vlad

>>
>> Maybe you remember, we had a similar situation with commit 3e4f8b787370978733ca6cae452720a4f0c296b8
>> (macvtap: Perform GSO on forwarding path), the setup is basically the same.
>>
>>
>> Christian
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe netdev" in
>> the body of a message to majordomo@...r.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
> 

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html