netdev - Re: [PATCH regression] net: phy: fix initialization (config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 02 Apr 2014 16:07:07 +0400
From:	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To:	Alexander Holler <holler@...oftware.de>,
	linux-kernel@...r.kernel.org
CC:	netdev@...r.kernel.org, Florian Fainelli <f.fainelli@...il.com>,
	Michal Simek <michal.simek@...inx.com>, stable@...r.kernel.org
Subject: Re: [PATCH regression] net: phy: fix initialization (config_init)
 for Marvel 88E1116R PHYs

On 02-04-2014 15:51, Sergei Shtylyov wrote:

>> Commit 7cd1463664c2a15721ff4ccfb61d4d970815cb3d (introduced with 3.14)
>> changed the initialization of the mv643xx_eth driver to use phy_init_hw()
>> to reset the PHY. Unfortunately the initialization for the 88E1116R PHY
>> was broken such, that it used mdelay() instead of really waiting for a
>> reset to finish.

>> The effect was that the ethernet on my Kirkwood 88F6281 based device didn't
>> come up anymore (no carrier).

>> Fix this by waiting for a reset to finish before proceeding further.

>> Signed-off-by: Alexander Holler <holler@...oftware.de>

>> Cc: Michal Simek <michal.simek@...inx.com>
>> Cc: Florian Fainelli <f.fainelli@...il.com>
>> Cc: <stable@...r.kernel.org>
>> ---
>>   drivers/net/phy/marvell.c | 8 ++++++--
>>   1 file changed, 6 insertions(+), 2 deletions(-)

>> diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
>> index bd37e45..5b84808 100644
>> --- a/drivers/net/phy/marvell.c
>> +++ b/drivers/net/phy/marvell.c
[...]
>> @@ -429,7 +431,9 @@ static int m88e1116r_config_init(struct phy_device *phydev)
>>       if (err < 0)
>>           return err;
>>
>> -    mdelay(500);
>> +    do
>> +        temp = phy_read(phydev, MII_BMCR);
>> +    while (temp & BMCR_RESET);

>     Not clear why it's necessary to reset one more time... Also, tight loop
> without a timeout (0.5 sec, specified by IEEE 802.3) doesn't look good. The
> comment above phy_poll_reset() suggests that it could be used in the PHY
> drivers as well. Florian?

    Ah, I was looking at Linus' tree, not net-next.git, and hadn't read 
Florian's replies before commenting on this...

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html