| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 25 Apr 2014 17:43:57 -0400
From: Jitendra Kalsaria <jitendra.kalsaria@...gic.com>
To: <davem@...emloft.net>
CC: <netdev@...r.kernel.org>, <shahed.shaikh@...gic.com>,
<Dept-HSGLinuxNICDev@...gic.com>,
Harish Patil <harish.patil@...gic.com>
Subject: [PATCH net-next 2/6] qlcnic: Add hwmon interface to export board temperature.
From: Harish Patil <harish.patil@...gic.com>
Signed-off-by: Harish Patil <harish.patil@...gic.com>
---
drivers/net/ethernet/qlogic/Kconfig | 11 ++++
drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 15 ++++++
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 4 +-
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c | 66 +++++++++++++++++++++++
4 files changed, 95 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/Kconfig b/drivers/net/ethernet/qlogic/Kconfig
index c14bd31..25b19dd 100644
--- a/drivers/net/ethernet/qlogic/Kconfig
+++ b/drivers/net/ethernet/qlogic/Kconfig
@@ -66,6 +66,17 @@ config QLCNIC_VXLAN
Say Y here if you want to enable hardware offload support for
Virtual eXtensible Local Area Network (VXLAN) in the driver.
+config QLCNIC_HWMON
+ bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
+ depends on QLCNIC && HWMON
+ default y
+ ---help---
+ This configuration parameter can be used to read the
+ board temperature in Converged Ethernet devices
+ supported by qlcnic.
+
+ This data is available via the hwmon sysfs interface.
+
config QLGE
tristate "QLogic QLGE 10Gb Ethernet Driver Support"
depends on PCI
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 7b52a88..381da04 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -537,6 +537,7 @@ struct qlcnic_hardware_context {
u8 phys_port_id[ETH_ALEN];
u8 lb_mode;
u16 vxlan_port;
+ struct device *hwmon_dev;
};
struct qlcnic_adapter_stats {
@@ -2361,4 +2362,18 @@ static inline u32 qlcnic_get_vnic_func_count(struct qlcnic_adapter *adapter)
else
return QLC_DEFAULT_VNIC_COUNT;
}
+
+#ifdef CONFIG_QLCNIC_HWMON
+void qlcnic_register_hwmon_dev(struct qlcnic_adapter *);
+void qlcnic_unregister_hwmon_dev(struct qlcnic_adapter *);
+#else
+static inline void qlcnic_register_hwmon_dev(struct qlcnic_adapter *adapter)
+{
+ return;
+}
+static inline void qlcnic_unregister_hwmon_dev(struct qlcnic_adapter *adapter)
+{
+ return;
+}
+#endif
#endif /* __QLCNIC_H_ */
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index dbf7539..d853e31 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -2593,7 +2593,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
qlcnic_alloc_lb_filters_mem(adapter);
qlcnic_add_sysfs(adapter);
-
+ qlcnic_register_hwmon_dev(adapter);
return 0;
err_out_disable_mbx_intr:
@@ -2700,6 +2700,8 @@ static void qlcnic_remove(struct pci_dev *pdev)
qlcnic_remove_sysfs(adapter);
+ qlcnic_unregister_hwmon_dev(adapter);
+
qlcnic_cleanup_pci_map(adapter->ahw);
qlcnic_release_firmware(adapter);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
index cd346e2..eee5fc9 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
@@ -19,6 +19,10 @@
#include <linux/sysfs.h>
#include <linux/aer.h>
#include <linux/log2.h>
+#ifdef CONFIG_QLCNIC_HWMON
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#endif
#define QLC_STATUS_UNSUPPORTED_CMD -2
@@ -1243,6 +1247,68 @@ static struct bin_attribute bin_attr_flash = {
.write = qlcnic_83xx_sysfs_flash_write_handler,
};
+#ifdef CONFIG_QLCNIC_HWMON
+
+static ssize_t qlcnic_hwmon_show_temp(struct device *dev,
+ struct device_attribute *dev_attr,
+ char *buf)
+{
+ struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
+ unsigned int temperature = 0, value = 0;
+
+ if (qlcnic_83xx_check(adapter))
+ value = QLCRDX(adapter->ahw, QLC_83XX_ASIC_TEMP);
+ else if (qlcnic_82xx_check(adapter))
+ value = QLC_SHARED_REG_RD32(adapter, QLCNIC_ASIC_TEMP);
+
+ temperature = qlcnic_get_temp_val(value);
+ /* display millidegree celcius */
+ temperature *= 1000;
+ return sprintf(buf, "%u\n", temperature);
+}
+
+/* hwmon-sysfs attributes */
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
+ qlcnic_hwmon_show_temp, NULL, 1);
+
+static struct attribute *qlcnic_hwmon_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ NULL
+};
+
+ATTRIBUTE_GROUPS(qlcnic_hwmon);
+
+void qlcnic_register_hwmon_dev(struct qlcnic_adapter *adapter)
+{
+ struct device *dev = &adapter->pdev->dev;
+ struct device *hwmon_dev;
+
+ /* Skip hwmon registration for a VF device */
+ if (qlcnic_sriov_vf_check(adapter)) {
+ adapter->ahw->hwmon_dev = NULL;
+ return;
+ }
+ hwmon_dev = hwmon_device_register_with_groups(dev, qlcnic_driver_name,
+ adapter,
+ qlcnic_hwmon_groups);
+ if (IS_ERR(hwmon_dev)) {
+ dev_err(dev, "Cannot register with hwmon, err=%ld\n",
+ PTR_ERR(hwmon_dev));
+ hwmon_dev = NULL;
+ }
+ adapter->ahw->hwmon_dev = hwmon_dev;
+}
+
+void qlcnic_unregister_hwmon_dev(struct qlcnic_adapter *adapter)
+{
+ struct device *hwmon_dev = adapter->ahw->hwmon_dev;
+ if (hwmon_dev) {
+ hwmon_device_unregister(hwmon_dev);
+ adapter->ahw->hwmon_dev = NULL;
+ }
+}
+#endif
+
void qlcnic_create_sysfs_entries(struct qlcnic_adapter *adapter)
{
struct device *dev = &adapter->pdev->dev;
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists