From: Stefan Raspl The default queue for queueing modes prio_queueing_prec and prio_queueing_tos is supposed to be QETH_DEFAULT_QUEUE. However, neither mode will reset the default default_out_queue value when enabled, leaving a previously set value activate as the default. E.g. enabling one of the fixed queueing modes, e.g. no_prio_queueing:0, and successively switching to any of the prio_queueing_* modes will leave default_out_queue at the previous (wrong) value 0. Signed-off-by: Stefan Raspl Signed-off-by: Frank Blaschka --- drivers/s390/net/qeth_core_sys.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c index 425c0ec..8547de8 100644 --- a/drivers/s390/net/qeth_core_sys.c +++ b/drivers/s390/net/qeth_core_sys.c @@ -250,11 +250,13 @@ static ssize_t qeth_dev_prioqing_store(struct device *dev, } tmp = strsep((char **) &buf, "\n"); - if (!strcmp(tmp, "prio_queueing_prec")) + if (!strcmp(tmp, "prio_queueing_prec")) { card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_PREC; - else if (!strcmp(tmp, "prio_queueing_tos")) + card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; + } else if (!strcmp(tmp, "prio_queueing_tos")) { card->qdio.do_prio_queueing = QETH_PRIO_Q_ING_TOS; - else if (!strcmp(tmp, "no_prio_queueing:0")) { + card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; + } else if (!strcmp(tmp, "no_prio_queueing:0")) { card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING; card->qdio.default_out_queue = 0; } else if (!strcmp(tmp, "no_prio_queueing:1")) { -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html