Date:	Tue, 17 Jun 2014 10:41:44 +0200
From:	Alexander Aring <alex.aring@...il.com>
To:	Varka Bhadram <varkabhadram@...il.com>
Cc:	netdev@...r.kernel.org, Varka Bhadram <varkab@...c.in>,
	linux-kernel@...r.kernel.org,
	linux-zigbee-devel@...ts.sourceforge.net, davem@...emloft.net
Subject: Re: [Linux-zigbee-devel] [PATCH net-next v1 1/3] ieee802154: cc2520:
 adds driver for TI CC2520 radio

Hi Varka,

you are on v2 not v1. :-)

On Tue, Jun 17, 2014 at 12:44:56PM +0530, Varka Bhadram wrote:
> This patch adds the driver support for TI cc2520 radio.
> 
> Few points about CC2520:
> 	- The CC2520 is TI's second generation IEEE 802.15.4 RF transceiver 
> 	for the 2.4 GHz unlicensed ISM band.
> 	- DSSS baseband modem with 250 kbps data rate
> 	- Programmable output power up to +5 dBm
> 	- Excellent receiver sensitivity (-98 dBm)
> 

I meant here more what the driver supports... not what the Transceiver
hardware supports.

> Signed-off-by: Varka Bhadram <varkab@...c.in>
> ---
>  drivers/net/ieee802154/cc2520.c |  966 +++++++++++++++++++++++++++++++++++++++
>  include/linux/spi/cc2520.h      |   26 ++
>  2 files changed, 992 insertions(+)
>  create mode 100644 drivers/net/ieee802154/cc2520.c
>  create mode 100644 include/linux/spi/cc2520.h
> 
> diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
> new file mode 100644
> index 0000000..7e6afe3
> --- /dev/null
> +++ b/drivers/net/ieee802154/cc2520.c
> @@ -0,0 +1,966 @@
> +/* Driver for TI CC2520 802.15.4 Wireless-PAN Networking controller
> + *
> + * Copyright (C) 2014 Varka Bhadram <varkab@...c.in>
> + *		      Md.Jamal Mohiuddin <mjmohiuddin@...c.in>
> + *		      P Sowjanya <sowjanyap@...c.in>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/gpio.h>
> +#include <linux/delay.h>
> +#include <linux/spi/spi.h>
> +#include <linux/spi/cc2520.h>
> +#include <linux/workqueue.h>
> +#include <linux/interrupt.h>
> +
> +#include <linux/skbuff.h>
> +
> +#include <linux/pinctrl/consumer.h>
> +
> +#include <linux/of_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_gpio.h>
> +
> +#include <net/mac802154.h>
> +#include <net/wpan-phy.h>
> +
> +#define	SPI_COMMAND_BUFFER	3
> +#define	HIGH			1
> +#define	LOW			0
> +#define	STATE_IDLE		0
> +#define RSSI_VALID		0
> +#define RSSI_OFFSET		78
> +
> +#define CC2520_RAM_SIZE		640
> +#define CC2520_FIFO_SIZE	128
> +
> +#define CC2520RAM_TXFIFO	0x100,
> +#define CC2520RAM_RXFIFO	0x180,
> +#define CC2520RAM_IEEEADDR	0x3EA,
> +#define CC2520RAM_PANID		0x3F2,
> +#define CC2520RAM_SHORTADDR	0x3F4,
> +
> +#define CC2520_FREG_MASK	0x3F
> +
> +/*status byte values */
> +#define	CC2520_STATUS_XOSC32M_STABLE	(1 << 7)
> +#define	CC2520_STATUS_RSSI_VALID	(1 << 6)
> +#define	CC2520_STATUS_TX_UNDERFLOW	(1 << 3)
> +
> +/*IEEE 802.15.4 defined constants (2.4 GHz logical channels) */
> +#define CC2520_MINCHANNEL		11
> +#define CC2520_MAXCHANNEL		26
> +#define CC2520_CHANNEL_SPACING		5
> +
> +/*command strobes*/
> +#define	CC2520_CMD_SNOP			0x00
> +#define	CC2520_CMD_IBUFLD		0x02
> +#define	CC2520_CMD_SIBUFEX		0x03
> +#define	CC2520_CMD_SSAMPLECCA		0x04
> +#define	CC2520_CMD_SRES			0x0f
> +#define	CC2520_CMD_MEMORY_MASK		0x0f
> +#define	CC2520_CMD_MEMORY_READ		0x10
> +#define	CC2520_CMD_MEMORY_WRITE		0x20
> +#define	CC2520_CMD_RXBUF		0x30
> +#define	CC2520_CMD_RXBUFCP		0x38
> +#define	CC2520_CMD_RXBUFMOV		0x32
> +#define	CC2520_CMD_TXBUF		0x3A
> +#define	CC2520_CMD_TXBUFCP		0x3E
> +#define	CC2520_CMD_RANDOM		0x3C
> +#define	CC2520_CMD_SXOSCON		0x40
> +#define	CC2520_CMD_STXCAL		0x41
> +#define	CC2520_CMD_SRXON		0x42
> +#define	CC2520_CMD_STXON		0x43
> +#define	CC2520_CMD_STXONCCA		0x44
> +#define	CC2520_CMD_SRFOFF		0x45
> +#define	CC2520_CMD_SXOSCOFF		0x46
> +#define	CC2520_CMD_SFLUSHRX		0x47
> +#define	CC2520_CMD_SFLUSHTX		0x48
> +#define	CC2520_CMD_SACK			0x49
> +#define	CC2520_CMD_SACKPEND		0x4A
> +#define	CC2520_CMD_SNACK		0x4B
> +#define	CC2520_CMD_SRXMASKBITSET	0x4C
> +#define	CC2520_CMD_SRXMASKBITCLR	0x4D
> +#define	CC2520_CMD_RXMASKAND		0x4E
> +#define	CC2520_CMD_RXMASKOR		0x4F
> +#define	CC2520_CMD_MEMCP		0x50
> +#define	CC2520_CMD_MEMCPR		0x52
> +#define	CC2520_CMD_MEMXCP		0x54
> +#define	CC2520_CMD_MEMXWR		0x56
> +#define	CC2520_CMD_BCLR			0x58
> +#define	CC2520_CMD_BSET			0x59
> +#define	CC2520_CMD_CTR_UCTR		0x60
> +#define	CC2520_CMD_CBCMAC		0x64
> +#define	CC2520_CMD_UCBCMAC		0x66
> +#define	CC2520_CMD_CCM			0x68
> +#define	CC2520_CMD_UCCM			0x6A
> +#define	CC2520_CMD_ECB			0x70
> +#define	CC2520_CMD_ECBO			0x72
> +#define	CC2520_CMD_ECBX			0x74
> +#define	CC2520_CMD_INC			0x78
> +#define	CC2520_CMD_ABORT		0x7F
> +#define	CC2520_CMD_REGISTER_READ	0x80
> +#define	CC2520_CMD_REGISTER_WRITE	0xC0
> +
> +/* status registers */
> +#define	CC2520_CHIPID			0x40
> +#define	CC2520_VERSION			0x42
> +#define	CC2520_EXTCLOCK			0x44
> +#define	CC2520_MDMCTRL0			0x46
> +#define	CC2520_MDMCTRL1			0x47
> +#define	CC2520_FREQEST			0x48
> +#define	CC2520_RXCTRL			0x4A
> +#define	CC2520_FSCTRL			0x4C
> +#define	CC2520_FSCAL0			0x4E
> +#define	CC2520_FSCAL1			0x4F
> +#define	CC2520_FSCAL2			0x50
> +#define	CC2520_FSCAL3			0x51
> +#define	CC2520_AGCCTRL0			0x52
> +#define	CC2520_AGCCTRL1			0x53
> +#define	CC2520_AGCCTRL2			0x54
> +#define	CC2520_AGCCTRL3			0x55
> +#define	CC2520_ADCTEST0			0x56
> +#define	CC2520_ADCTEST1			0x57
> +#define	CC2520_ADCTEST2			0x58
> +#define	CC2520_MDMTEST0			0x5A
> +#define	CC2520_MDMTEST1			0x5B
> +#define CC2520_DACTEST0			0x5C
> +#define CC2520_DACTEST1			0x5D
> +#define CC2520_ATEST			0x5E
> +#define CC2520_DACTEST2			0x5F
> +#define CC2520_PTEST0			0x60
> +#define CC2520_PTEST1			0x61
> +#define CC2520_RESERVED			0x62
> +#define CC2520_DPUBIST			0x7A
> +#define CC2520_ACTBIST			0x7C
> +#define CC2520_RAMBIST			0x7E
> +
> +/*frame registers*/
> +#define CC2520_FRMFILT0			0x00
> +#define CC2520_FRMFILT1			0x01
> +#define CC2520_SRCMATCH			0x02
> +#define CC2520_SRCSHORTEN0		0x04
> +#define CC2520_SRCSHORTEN1		0x05
> +#define CC2520_SRCSHORTEN2		0x06
> +#define CC2520_SRCEXTEN0		0x08
> +#define CC2520_SRCEXTEN1		0x09
> +#define CC2520_SRCEXTEN2		0x0A
> +#define CC2520_FRMCTRL0			0x0C
> +#define CC2520_FRMCTRL1			0x0D
> +#define CC2520_RXENABLE0		0x0E
> +#define CC2520_RXENABLE1		0x0F
> +#define CC2520_EXCFLAG0			0x10
> +#define CC2520_EXCFLAG1			0x11
> +#define CC2520_EXCFLAG2			0x12
> +#define CC2520_EXCMASKA0		0x14
> +#define CC2520_EXCMASKA1		0x15
> +#define CC2520_EXCMASKA2		0x16
> +#define CC2520_EXCMASKB0		0x18
> +#define CC2520_EXCMASKB1		0x19
> +#define CC2520_EXCMASKB2		0x1A
> +#define CC2520_EXCBINDX0		0x1C
> +#define CC2520_EXCBINDX1		0x1D
> +#define CC2520_EXCBINDY0		0x1E
> +#define CC2520_EXCBINDY1		0x1F
> +#define CC2520_GPIOCTRL0		0x20
> +#define CC2520_GPIOCTRL1		0x21
> +#define CC2520_GPIOCTRL2		0x22
> +#define CC2520_GPIOCTRL3		0x23
> +#define CC2520_GPIOCTRL4		0x24
> +#define CC2520_GPIOCTRL5		0x25
> +#define CC2520_GPIOPOLARITY		0x26
> +#define CC2520_GPIOCTRL			0x28
> +#define CC2520_DPUCON			0x2A
> +#define CC2520_DPUSTAT			0x2C
> +#define CC2520_FREQCTRL			0x2E
> +#define CC2520_FREQTUNE			0x2F
> +#define CC2520_TXPOWER			0x30
> +#define CC2520_TXCTRL			0x31
> +#define CC2520_FSMSTAT0			0x32
> +#define CC2520_FSMSTAT1			0x33
> +#define CC2520_FIFOPCTRL		0x34
> +#define CC2520_FSMCTRL			0x35
> +#define CC2520_CCACTRL0			0x36
> +#define CC2520_CCACTRL1			0x37
> +#define CC2520_RSSI			0x38
> +#define CC2520_RSSISTAT			0x39
> +#define CC2520_RXFIRST			0x3C
> +#define CC2520_RXFIFOCNT		0x3E
> +#define CC2520_TXFIFOCNT		0x3F
> +
> +/* Driver private information */
> +struct cc2520_private {
> +	struct spi_device *spi;		/* spi device structure */
> +	struct ieee802154_dev *dev;	/* Ieee802.15.4 device */
> +	u8 *buf;			/* SPI TX/Rx data buffer */
> +	struct mutex buffer_mutex;	/* SPI buffer mutex */
> +	unsigned is_tx:1;		/* Flag for sync b/w Tx and Rx */
> +	int fifo_pin;			/* FIFO GPIO pin number */
> +	struct work_struct fifop_irqwork;/* Workqueue for FIFOP */
> +	spinlock_t lock;		/* Spin lock */
> +	struct completion tx_complete;	/* Work completion for Tx */
> +};
> +
> +/* Generic Functions */
> +static int
> +cc2520_cmd_strobe(struct cc2520_private *priv, u8 cmd)
> +{
> +	int ret;
> +	u8 status = 0xff;
> +	struct spi_message msg;
> +	struct spi_transfer xfer = {
> +		.len = 0,
> +		.tx_buf = priv->buf,
> +		.rx_buf = priv->buf,
> +	};
> +
> +	spi_message_init(&msg);
> +	spi_message_add_tail(&xfer, &msg);
> +
> +	mutex_lock(&priv->buffer_mutex);
> +	priv->buf[xfer.len++] = cmd;
> +	dev_vdbg(&priv->spi->dev,
> +		 "command strobe buf[0] = %02x\n",
> +		 priv->buf[0]);
> +
> +	ret = spi_sync(priv->spi, &msg);
> +	if (!ret)
> +		status = priv->buf[0];
> +	dev_vdbg(&priv->spi->dev,
> +		 "buf[0] = %02x\n", priv->buf[0]);
> +	mutex_unlock(&priv->buffer_mutex);
> +
> +	return ret;
> +}

What's about to drop the lowlevel spi calls and use spi helper functions?

> +
> +static int
> +cc2520_get_status(struct cc2520_private *priv, u8 *status)
> +{
> +	int ret;
> +	struct spi_message msg;
> +	struct spi_transfer xfer = {
> +		.len = 0,
> +		.tx_buf = priv->buf,
> +		.rx_buf = priv->buf,
> +	};
> +
> +	spi_message_init(&msg);
> +	spi_message_add_tail(&xfer, &msg);
> +
> +	mutex_lock(&priv->buffer_mutex);
> +	priv->buf[xfer.len++] = CC2520_CMD_SNOP;
> +	dev_vdbg(&priv->spi->dev,
> +		 "get status command buf[0] = %02x\n", priv->buf[0]);
> +
> +	ret = spi_sync(priv->spi, &msg);
> +	if (!ret)
> +		*status = priv->buf[0];
> +	dev_vdbg(&priv->spi->dev,
> +		 "buf[0] = %02x\n", priv->buf[0]);
> +	mutex_unlock(&priv->buffer_mutex);
> +
> +	return ret;
> +}
> +
> +static int
> +cc2520_write_register(struct cc2520_private *priv, u8 reg, u8 value)
> +{
> +	int status;
> +	struct spi_message msg;
> +	struct spi_transfer xfer = {
> +		.len = 0,
> +		.tx_buf = priv->buf,
> +		.rx_buf = priv->buf,
> +	};
> +
> +	spi_message_init(&msg);
> +	spi_message_add_tail(&xfer, &msg);
> +
> +	mutex_lock(&priv->buffer_mutex);
> +
> +	if (reg <= CC2520_FREG_MASK) {
> +		priv->buf[xfer.len++] = CC2520_CMD_REGISTER_WRITE | reg;
> +		priv->buf[xfer.len++] = value;
> +	} else {
> +		priv->buf[xfer.len++] = CC2520_CMD_MEMORY_WRITE;
> +		priv->buf[xfer.len++] = reg;
> +		priv->buf[xfer.len++] = value;
> +	}
> +	status = spi_sync(priv->spi, &msg);
> +	if (msg.status)
> +		status = msg.status;
> +
> +	mutex_unlock(&priv->buffer_mutex);
> +
> +	return status;
> +}
> +
> +static int
> +cc2520_read_register(struct cc2520_private *priv, u8 reg, u8 *data)
> +{
> +	int status;
> +	struct spi_message msg;
> +	struct spi_transfer xfer1 = {
> +		.len = 0,
> +		.tx_buf = priv->buf,
> +		.rx_buf = priv->buf,
> +	};
> +
> +	struct spi_transfer xfer2 = {
> +		.len = 1,
> +		.rx_buf = data,
> +	};
> +
> +	spi_message_init(&msg);
> +	spi_message_add_tail(&xfer1, &msg);
> +	spi_message_add_tail(&xfer2, &msg);
> +
> +	mutex_lock(&priv->buffer_mutex);
> +	priv->buf[xfer1.len++] = CC2520_CMD_MEMORY_READ;
> +	priv->buf[xfer1.len++] = reg;
> +
> +	status = spi_sync(priv->spi, &msg);
> +	dev_dbg(&priv->spi->dev,
> +		"spi status = %d\n", status);
> +	if (msg.status)
> +		status = msg.status;
> +
> +	mutex_unlock(&priv->buffer_mutex);
> +
> +	return status;
> +}
> +
> +static int
> +cc2520_write_txfifo(struct cc2520_private *priv, u8 *data, u8 len)
> +{
> +	int status;
> +
> +	/*
> +	 *length byte must include FCS even
> +	 *if it is calculated in the hardware
> +	 */
> +	int len_byte = len + 2;
> +
> +	struct spi_message msg;
> +
> +	struct spi_transfer xfer_head = {
> +		.len = 0,
> +		.tx_buf = priv->buf,
> +		.rx_buf = priv->buf,
> +	};
> +	struct spi_transfer xfer_len = {
> +		.len = 1,
> +		.tx_buf = &len_byte,
> +	};
> +	struct spi_transfer xfer_buf = {
> +		.len = len,
> +		.tx_buf = data,
> +	};
> +
> +	spi_message_init(&msg);
> +	spi_message_add_tail(&xfer_head, &msg);
> +	spi_message_add_tail(&xfer_len, &msg);
> +	spi_message_add_tail(&xfer_buf, &msg);
> +
> +	mutex_lock(&priv->buffer_mutex);
> +	priv->buf[xfer_head.len++] = CC2520_CMD_TXBUF;
> +	dev_vdbg(&priv->spi->dev,
> +		 "TX_FIFO cmd buf[0] = %02x\n", priv->buf[0]);
> +
> +	status = spi_sync(priv->spi, &msg);
> +	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
> +	if (msg.status)
> +		status = msg.status;
> +	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
> +	dev_vdbg(&priv->spi->dev, "buf[0] = %02x\n", priv->buf[0]);
> +	mutex_unlock(&priv->buffer_mutex);
> +
> +	return status;
> +}
> +
> +static int
> +cc2520_read_rxfifo(struct cc2520_private *priv, u8 *data, u8 *len, u8 *lqi)

why is len a pointer here? It's never changed in this function I would
prefer const u8 len. 

> +{
> +	int status;
> +	struct spi_message msg;
> +
> +	struct spi_transfer xfer_head = {
> +		.len = 0,
> +		.tx_buf = priv->buf,
> +		.rx_buf = priv->buf,
> +	};
> +	struct spi_transfer xfer_buf = {
> +		.len = *len,
> +		.rx_buf = data,
> +	};
> +
> +	spi_message_init(&msg);
> +	spi_message_add_tail(&xfer_head, &msg);
> +	spi_message_add_tail(&xfer_buf, &msg);
> +
> +	mutex_lock(&priv->buffer_mutex);
> +	priv->buf[xfer_head.len++] = CC2520_CMD_RXBUF;
> +
> +	dev_vdbg(&priv->spi->dev, "read rxfifo buf[0] = %02x\n", priv->buf[0]);
> +	dev_vdbg(&priv->spi->dev, "buf[1] = %02x\n", priv->buf[1]);
> +
> +	status = spi_sync(priv->spi, &msg);
> +	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
> +	if (msg.status)
> +		status = msg.status;
> +	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
> +	dev_vdbg(&priv->spi->dev,
> +		 "return status buf[0] = %02x\n", priv->buf[0]);
> +	dev_vdbg(&priv->spi->dev, "length buf[1] = %02x\n", priv->buf[1]);
> +
> +	*lqi = data[priv->buf[1] - 1] & 0x7f;
> +
> +	mutex_unlock(&priv->buffer_mutex);
> +
> +	return status;
> +}
> +
> +static int cc2520_start(struct ieee802154_dev *dev)
> +{
> +	return cc2520_cmd_strobe(dev->priv, CC2520_CMD_SRXON);
> +}
> +
> +static void cc2520_stop(struct ieee802154_dev *dev)
> +{
> +	cc2520_cmd_strobe(dev->priv, CC2520_CMD_SRFOFF);
> +}
> +
> +static int
> +cc2520_tx(struct ieee802154_dev *dev, struct sk_buff *skb)
> +{
> +	struct cc2520_private *priv = dev->priv;
> +	unsigned long flags;
> +	int rc;
> +	u8 status = 0;
> +
> +	rc = cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHTX);
> +	if (rc)
> +		goto err_tx;
> +
> +	rc = cc2520_write_txfifo(priv, skb->data, skb->len);
> +	if (rc)
> +		goto err_tx;
> +
> +	rc = cc2520_get_status(priv, &status);
> +	if (rc)
> +		goto err_tx;
> +
> +	if (status & CC2520_STATUS_TX_UNDERFLOW) {
> +		dev_err(&priv->spi->dev, "cc2520 tx underflow exception\n");
> +		goto err_tx;
> +	}
> +
> +	spin_lock_irqsave(&priv->lock, flags);
> +	BUG_ON(priv->is_tx);
> +	priv->is_tx = 1;
> +	spin_unlock_irqrestore(&priv->lock, flags);
> +
> +	rc = cc2520_cmd_strobe(priv, CC2520_CMD_STXONCCA);
> +	if (rc)
> +		goto err;
> +
> +	rc = wait_for_completion_interruptible(&priv->tx_complete);
> +	if (rc < 0)
> +		goto err;

mhhh, I never see a reinit_completion and ask myself how the driver can
ever work?

We should also use a wait_for_completion_timeout here, then you need to
handle the error handling with if (!rc).

> +
> +	cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHTX);
> +	cc2520_cmd_strobe(priv, CC2520_CMD_SRXON);
> +
> +	return rc;
> +err:
> +	spin_lock_irqsave(&priv->lock, flags);
> +	priv->is_tx = 0;
> +	spin_unlock_irqrestore(&priv->lock, flags);
> +err_tx:
> +	return rc;
> +}
> +
> +
> +static int cc2520_rx(struct cc2520_private *priv)
> +{
> +	u8 len = 0, lqi = 0, bytes = 1;
> +	struct sk_buff *skb;
> +
> +	cc2520_read_rxfifo(priv, &len, &bytes, &lqi);
> +
> +	skb = alloc_skb(len, GFP_KERNEL);
> +	if (!skb)
> +		return -ENOMEM;
> +
> +	cc2520_read_rxfifo(priv, skb_put(skb, len), &len, &lqi);
> +	if (len < 2) {
> +		kfree_skb(skb);
> +		return -EINVAL;
> +	}
> +
> +	skb_trim(skb, skb->len - 2);
> +
> +	ieee802154_rx_irqsafe(priv->dev, skb, lqi);
> +
> +	dev_vdbg(&priv->spi->dev, "RXFIFO: %x %x\n", len, lqi);
> +
> +	return 0;
> +}
> +
> +static int
> +cc2520_ed(struct ieee802154_dev *dev, u8 *level)
> +{
> +	struct cc2520_private *priv = dev->priv;
> +	u8 status = 0xff;
> +	u8 rssi;
> +	int ret;
> +
> +	ret = cc2520_read_register(priv , CC2520_RSSISTAT, &status);
> +	if (ret)
> +		return ret;
> +
> +	if (status != RSSI_VALID) {
> +		ret = -EINVAL;
> +		return ret;
> +	}
> +
> +	ret = cc2520_read_register(priv , CC2520_RSSI, &rssi);
> +	if (ret)
> +		return ret;
> +
> +	/* level = RSSI(rssi) - OFFSET [dBm] : offset is 76dBm*/
> +	*level = rssi - RSSI_OFFSET;
> +
> +	return ret;
> +}
> +
> +static int
> +cc2520_set_channel(struct ieee802154_dev *dev, int page, int channel)
> +{
> +	struct cc2520_private *priv = dev->priv;
> +	int ret;
> +
> +	might_sleep();
> +	dev_dbg(&priv->spi->dev, "trying to set channel\n");
> +
> +	BUG_ON(page != 0);
> +	BUG_ON(channel < CC2520_MINCHANNEL);
> +	BUG_ON(channel > CC2520_MAXCHANNEL);
> +
> +	ret = cc2520_write_register(priv, CC2520_FREQCTRL,
> +				    11 + 5*(channel - 11));
> +
> +	return ret;
> +}
> +
> +static struct ieee802154_ops cc2520_ops = {
> +	.owner = THIS_MODULE,
> +	.start = cc2520_start,
> +	.stop = cc2520_stop,
> +	.xmit = cc2520_tx,
> +	.ed = cc2520_ed,
> +	.set_channel = cc2520_set_channel,
> +};
> +
> +static int cc2520_register(struct cc2520_private *priv)
> +{
> +	int ret = -ENOMEM;
> +
> +	priv->dev = ieee802154_alloc_device(sizeof(*priv), &cc2520_ops);
> +	if (!priv->dev)
> +		goto err_ret;
> +
> +	priv->dev->priv = priv;
> +	priv->dev->parent = &priv->spi->dev;
> +	priv->dev->extra_tx_headroom = 0;
> +
> +	/* We do support only 2.4 Ghz */
> +	priv->dev->phy->channels_supported[0] = 0x7FFF800;
> +	priv->dev->flags = IEEE802154_HW_OMIT_CKSUM;
> +
> +	dev_vdbg(&priv->spi->dev, "registered cc2520\n");
> +	ret = ieee802154_register_device(priv->dev);
> +	if (ret)
> +		goto err_free_device;
> +
> +	return 0;
> +
> +err_free_device:
> +	ieee802154_free_device(priv->dev);
> +err_ret:
> +	return ret;
> +}
> +
> +static void cc2520_fifop_irqwork(struct work_struct *work)
> +{
> +	struct cc2520_private *priv
> +		= container_of(work, struct cc2520_private, fifop_irqwork);
> +
> +	dev_dbg(&priv->spi->dev, "fifop interrupt received\n");
> +
> +	if (gpio_get_value(priv->fifo_pin))
> +		cc2520_rx(priv);
> +	else
> +		dev_err(&priv->spi->dev, "rxfifo overflow\n");
> +
> +	cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHRX);
> +	cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHRX);
> +}
> +
> +static irqreturn_t cc2520_fifop_isr(int irq, void *data)
> +{
> +	struct cc2520_private *priv = data;
> +
> +	schedule_work(&priv->fifop_irqwork);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t cc2520_sfd_isr(int irq, void *data)
> +{
> +	struct cc2520_private *priv = data;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&priv->lock, flags);
> +	if (priv->is_tx) {
> +		priv->is_tx = 0;
> +		spin_unlock_irqrestore(&priv->lock, flags);
> +		dev_dbg(&priv->spi->dev, "SFD for TX\n");
> +		complete(&priv->tx_complete);
> +	} else {
> +		spin_unlock_irqrestore(&priv->lock, flags);
> +		dev_dbg(&priv->spi->dev, "SFD for RX\n");
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int cc2520_hw_init(struct cc2520_private *priv)
> +{
> +	u8 status = 0, state = 0xff;
> +	int ret;
> +	int timeout = 100;
> +
> +	ret = cc2520_read_register(priv, CC2520_FSMSTAT1, &state);
> +	if (ret)
> +		goto err_ret;
> +
> +	if (state != STATE_IDLE)
> +		return -EINVAL;
> +
> +	do {
> +		ret = cc2520_get_status(priv, &status);
> +		if (ret)
> +			goto err_ret;
> +
> +		if (timeout-- <= 0) {
> +			dev_err(&priv->spi->dev, "oscillator start failed!\n");
> +			return ret;
> +		}
> +		udelay(1);
> +	} while (!(status & CC2520_STATUS_XOSC32M_STABLE));
> +
> +	dev_vdbg(&priv->spi->dev, "oscillator successfully brought up\n");
> +
> +	/*Registers default value: section 28.1 in Datasheet*/
> +	ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF7);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_CCACTRL0, 0x1A);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_MDMCTRL0, 0x85);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_MDMCTRL1, 0x14);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_RXCTRL, 0x3f);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_FSCTRL, 0x5a);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_FSCAL1, 0x2b);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x11);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_ADCTEST0, 0x10);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_ADCTEST1, 0x0e);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_ADCTEST2, 0x03);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_FRMCTRL0, 0x60);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_FRMCTRL1, 0x03);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_FRMFILT0, 0x00);
> +	if (ret)
> +		goto err_ret;
> +
> +	ret = cc2520_write_register(priv, CC2520_FIFOPCTRL, 127);
> +	if (ret)
> +		goto err_ret;
> +
> +	return 0;
> +
> +err_ret:
> +	return ret;
> +}
> +
> +static struct cc2520_platform_data *
> +cc2520_get_platform_data(struct spi_device *spi)
> +{
> +	struct cc2520_platform_data *pdata;
> +	struct device_node __maybe_unused *np = spi->dev.of_node;
> +	struct cc2520_private *priv = spi_get_drvdata(spi);
> +
> +	if (!IS_ENABLED(CONFIG_OF) || !np)
> +		return spi->dev.platform_data;
> +
> +	pdata = devm_kzalloc(&spi->dev, sizeof(*pdata), GFP_KERNEL);
> +	if (!pdata)
> +		goto done;
> +
> +	pdata->fifo = of_get_named_gpio(np, "fifo-gpio", 0);
> +	priv->fifo_pin = pdata->fifo;
> +
> +	pdata->fifop = of_get_named_gpio(np, "fifop-gpio", 0);
> +
> +	pdata->sfd = of_get_named_gpio(np, "sfd-gpio", 0);
> +	pdata->cca = of_get_named_gpio(np, "cca-gpio", 0);
> +	pdata->vreg = of_get_named_gpio(np, "vreg-gpio", 0);
> +	pdata->reset = of_get_named_gpio(np, "reset-gpio", 0);
> +
> +	spi->dev.platform_data = pdata;
> +
> +done:
> +	return pdata;
> +}
> +
> +static int cc2520_probe(struct spi_device *spi)
> +{
> +	struct cc2520_private *priv;
> +	struct pinctrl *pinctrl;
> +	struct cc2520_platform_data *pdata;
> +	struct device_node __maybe_unused *np = spi->dev.of_node;
> +	int ret;
> +
> +	priv = devm_kzalloc(&spi->dev,
> +			    sizeof(struct cc2520_private), GFP_KERNEL);
> +	if (!priv) {
> +		ret = -ENOMEM;
> +		goto err_ret;
> +	}
> +
> +	spi_set_drvdata(spi, priv);
> +
> +	pinctrl = devm_pinctrl_get_select_default(&spi->dev);
> +	if (IS_ERR(pinctrl))
> +		dev_warn(&spi->dev,
> +			 "pinctrl pins are not configured from the driver");
> +
> +	pdata = cc2520_get_platform_data(spi);
> +	if (!pdata) {
> +		dev_err(&spi->dev, "no platform data\n");
> +		return -EINVAL;
> +	}
> +
> +	priv->spi = spi;
> +
> +	priv->buf = devm_kzalloc(&spi->dev,
> +				 SPI_COMMAND_BUFFER, GFP_KERNEL);
> +	if (!priv->buf) {
> +		ret = -ENOMEM;
> +		goto err_ret;
> +	}
> +
> +	mutex_init(&priv->buffer_mutex);
> +	INIT_WORK(&priv->fifop_irqwork, cc2520_fifop_irqwork);
> +	spin_lock_init(&priv->lock);
> +	init_completion(&priv->tx_complete);
> +
> +	/* Request all the gpio's */
> +	if (!gpio_is_valid(pdata->fifo)) {
> +		dev_err(&spi->dev, "fifo gpio is not valid\n");
> +		ret = -EINVAL;
> +		goto err_hw_init;
> +	} else {
> +		ret = devm_gpio_request_one(&spi->dev, pdata->fifo,
> +					    GPIOF_IN, "fifo");
> +		if (ret)
> +			goto err_hw_init;
> +	}

you can drop the else branch here...

> +
> +	if (!gpio_is_valid(pdata->cca)) {
> +		dev_err(&spi->dev, "cca gpio is not valid\n");
> +		ret = -EINVAL;
> +		goto err_hw_init;
> +	} else {
> +		ret = devm_gpio_request_one(&spi->dev, pdata->cca,
> +					    GPIOF_IN, "cca");
> +		if (ret)
> +			goto err_hw_init;
> +	}
> +

Same here.

> +	if (!gpio_is_valid(pdata->fifop)) {
> +		dev_err(&spi->dev, "fifop gpio is not valid\n");
> +		ret = -EINVAL;
> +		goto err_hw_init;
> +	} else {
> +		ret = devm_gpio_request_one(&spi->dev, pdata->fifop,
> +					    GPIOF_IN, "fifop");
> +		if (ret)
> +			goto err_hw_init;
> +	}
> +

Same here.

> +	if (!gpio_is_valid(pdata->sfd)) {
> +		dev_err(&spi->dev, "sfd gpio is not valid\n");
> +		ret = -EINVAL;
> +		goto err_hw_init;
> +	} else {
> +		ret = devm_gpio_request_one(&spi->dev, pdata->sfd,
> +					    GPIOF_IN, "sfd");
> +		if (ret)
> +			goto err_hw_init;
> +	}
> +

Same here.

> +	if (!gpio_is_valid(pdata->reset)) {
> +		dev_err(&spi->dev, "reset gpio is not valid\n");
> +		ret = -EINVAL;
> +		goto err_hw_init;
> +	} else {
> +		ret = devm_gpio_request_one(&spi->dev, pdata->reset,
> +					    GPIOF_OUT_INIT_LOW, "reset");
> +		if (ret)
> +			goto err_hw_init;
> +	}
> +

Same here.

> +	if (!gpio_is_valid(pdata->vreg)) {
> +		dev_err(&spi->dev, "vreg gpio is not valid\n");
> +		ret = -EINVAL;
> +		goto err_hw_init;
> +	} else {
> +		ret = devm_gpio_request_one(&spi->dev, pdata->vreg,
> +					    GPIOF_OUT_INIT_LOW, "vreg");
> +		if (ret)
> +			goto err_hw_init;
> +	}
> +

Same here.

> +	gpio_set_value(pdata->vreg, HIGH);
> +	udelay(100);
> +
> +	gpio_set_value(pdata->reset, HIGH);
> +	udelay(200);
> +
> +	ret = cc2520_hw_init(priv);
> +	if (ret)
> +		goto err_hw_init;
> +
> +	/* Set up fifop interrupt */
> +	ret = devm_request_irq(&spi->dev,
> +			       gpio_to_irq(pdata->fifop),
> +			       cc2520_fifop_isr,
> +			       IRQF_TRIGGER_RISING,
> +			       dev_name(&spi->dev),
> +			       priv);
> +	if (ret) {
> +		dev_err(&spi->dev, "could not get fifop irq\n");
> +		goto err_hw_init;
> +	}
> +
> +	/* Set up sfd interrupt */
> +	ret = devm_request_irq(&spi->dev,
> +			       gpio_to_irq(pdata->sfd),
> +			       cc2520_sfd_isr,
> +			       IRQF_TRIGGER_FALLING,
> +			       dev_name(&spi->dev),
> +			       priv);
> +	if (ret) {
> +		dev_err(&spi->dev, "could not get sfd irq\n");
> +		goto err_hw_init;
> +	}
> +
> +	ret = cc2520_register(priv);
> +	if (ret)
> +		goto err_hw_init;
> +
> +	return 0;
> +
> +err_hw_init:
> +	mutex_destroy(&priv->buffer_mutex);
> +	flush_work(&priv->fifop_irqwork);
> +
> +err_ret:
> +	return ret;
> +}
> +
> +static int cc2520_remove(struct spi_device *spi)
> +{
> +	struct cc2520_private *priv = spi_get_drvdata(spi);
> +
> +	ieee802154_unregister_device(priv->dev);
> +	ieee802154_free_device(priv->dev);
> +
> +	mutex_destroy(&priv->buffer_mutex);
> +	flush_work(&priv->fifop_irqwork);
> +
> +	return 0;
> +}
> +
> +static const struct spi_device_id cc2520_ids[] = {
> +	{"cc2520", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(spi, cc2520_ids);
> +
> +static const struct of_device_id cc2520_of_ids[] = {
> +	{.compatible = "ti,cc2520", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, cc2520_of_ids);
> +
> +/*SPI driver structure*/
> +static struct spi_driver cc2520_driver = {
> +	.driver = {
> +		.name = "cc2520",
> +		.bus = &spi_bus_type,
> +		.owner = THIS_MODULE,
> +		.of_match_table = of_match_ptr(cc2520_of_ids),
> +	},
> +	.id_table = cc2520_ids,
> +	.probe = cc2520_probe,
> +	.remove = cc2520_remove,
> +};
> +module_spi_driver(cc2520_driver);
> +
> +MODULE_DESCRIPTION("CC2520 Transceiver Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/spi/cc2520.h b/include/linux/spi/cc2520.h
> new file mode 100644
> index 0000000..56ce81e
> --- /dev/null
> +++ b/include/linux/spi/cc2520.h
> @@ -0,0 +1,26 @@
> +/* Header file for cc2520 driver
> + *
> + * Copyright (C) 2014 Varka Bhadram <varkab@...c.in>
> + *                    Md.Jamal Mohiuddin <mjmohiuddin@...c.in>
> + *                    P Sowjanya <sowjanyap@...c.in>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + */
> +
> +#ifndef __CC2520_H
> +#define __CC2520_H
> +
> +struct cc2520_platform_data {
> +	int fifo;
> +	int fifop;
> +	int cca;
> +	int sfd;
> +	int reset;
> +	int vreg;
> +};
> +
> +#endif
> -- 
> 1.7.9.5
> 
> 
> ------------------------------------------------------------------------------
> HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
> Find What Matters Most in Your Big Data with HPCC Systems
> Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
> Leverages Graph Analysis for Fast Processing & Easy Data Exploration
> http://p.sf.net/sfu/hpccsystems
> _______________________________________________
> Linux-zigbee-devel mailing list
> Linux-zigbee-devel@...ts.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists