netdev - Re: [PATCH v2 1/2] net: davinci_mdio: reuse for keystone2 arch

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 16 Jul 2014 20:22:10 +0100
From:	Prabhakar Lad <prabhakar.csengg@...il.com>
To:	Grygorii Strashko <grygorii.strashko@...com>
Cc:	"David S. Miller" <davem@...emloft.net>,
	Florian Fainelli <f.fainelli@...il.com>,
	Santosh Shilimkar <santosh.shilimkar@...com>,
	netdev <netdev@...r.kernel.org>, Sekhar Nori <nsekhar@...com>,
	Rob Herring <robh+dt@...nel.org>,
	LKML <linux-kernel@...r.kernel.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	dlos <davinci-linux-open-source@...ux.davincidsp.com>,
	Mugunthan V N <mugunthanvnm@...com>
Subject: Re: [PATCH v2 1/2] net: davinci_mdio: reuse for keystone2 arch

On Wed, Jul 16, 2014 at 1:13 PM, Grygorii Strashko
<grygorii.strashko@...com> wrote:
> The similar MDIO HW blocks is used by keystone 2 SoCs as
> in Davinci SoCs:
> - one in Gigabit Ethernet (GbE) Switch Subsystem
>   See http://www.ti.com/lit/ug/sprugv9d/sprugv9d.pdf
> - one in 10 Gigabit Ethernet Subsystem
>   See http://www.ti.com/lit/ug/spruhj5/spruhj5.pdf
>
> Hence, reuse Davinci MDIO driver for Keystone 2 and
> enable TI networking for Keystone 2 devices
>
> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@...com>
> Acked-by: Mugunthan V N <mugunthanvnm@...com>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>

Reviewed-by: Lad, Prabhakar <prabhakar.csengg@...il.com>

Thanks,
--Prabhakar Lad

> ---
>  .../devicetree/bindings/net/davinci-mdio.txt       |    8 ++++----
>  drivers/net/ethernet/ti/Kconfig                    |    4 ++--
>  2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/davinci-mdio.txt b/Documentation/devicetree/bindings/net/davinci-mdio.txt
> index 72efaaf..0369e25 100644
> --- a/Documentation/devicetree/bindings/net/davinci-mdio.txt
> +++ b/Documentation/devicetree/bindings/net/davinci-mdio.txt
> @@ -1,8 +1,8 @@
> -TI SoC Davinci MDIO Controller Device Tree Bindings
> +TI SoC Davinci/Keystone2 MDIO Controller Device Tree Bindings
>  ---------------------------------------------------
>
>  Required properties:
> -- compatible           : Should be "ti,davinci_mdio"
> +- compatible           : Should be "ti,davinci_mdio" or "ti,keystone_mdio"
>  - reg                  : physical base address and size of the davinci mdio
>                           registers map
>  - bus_freq             : Mdio Bus frequency
> @@ -19,7 +19,7 @@ file.
>  Examples:
>
>         mdio: davinci_mdio@...01000 {
> -               compatible = "ti,cpsw";
> +               compatible = "ti,davinci_mdio";
>                 reg = <0x4A101000 0x1000>;
>                 bus_freq = <1000000>;
>         };
> @@ -27,7 +27,7 @@ Examples:
>  (or)
>
>         mdio: davinci_mdio@...01000 {
> -               compatible = "ti,cpsw";
> +               compatible = "ti,davinci_mdio";
>                 ti,hwmods = "davinci_mdio";
>                 bus_freq = <1000000>;
>         };
> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
> index 53150c2..1769700 100644
> --- a/drivers/net/ethernet/ti/Kconfig
> +++ b/drivers/net/ethernet/ti/Kconfig
> @@ -5,7 +5,7 @@
>  config NET_VENDOR_TI
>         bool "Texas Instruments (TI) devices"
>         default y
> -       depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX))
> +       depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX || ARCH_KEYSTONE))
>         ---help---
>           If you have a network (Ethernet) card belonging to this class, say Y
>           and read the Ethernet-HOWTO, available from
> @@ -32,7 +32,7 @@ config TI_DAVINCI_EMAC
>
>  config TI_DAVINCI_MDIO
>         tristate "TI DaVinci MDIO Support"
> -       depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX )
> +       depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX || ARCH_KEYSTONE )
>         select PHYLIB
>         ---help---
>           This driver supports TI's DaVinci MDIO module.
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html