netdev - Re: [PATCH 05/13] ARM: dts: DRA7: Add DCAN nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 9 Sep 2014 11:30:50 +0300
From:	Roger Quadros <rogerq@...com>
To:	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
	<wg@...ndegger.com>, <mkl@...gutronix.de>, <tony@...mide.com>
CC:	<tglx@...utronix.de>, <linux-omap@...r.kernel.org>,
	<linux-can@...r.kernel.org>, <netdev@...r.kernel.org>,
	<mugunthanvnm@...com>, <george.cherian@...com>, <balbi@...com>,
	<nsekhar@...com>, <nm@...com>
Subject: Re: [PATCH 05/13] ARM: dts: DRA7: Add DCAN nodes

Hi,

On 09/08/2014 07:40 PM, Sergei Shtylyov wrote:
> Hello.
> 
> On 9/8/2014 6:10 PM, Roger Quadros wrote:
> 
>> The SoC supports 2 DCAN nodes. Add them.
> 
>> Signed-off-by: Roger Quadros <rogerq@...com>
>> ---
>>   arch/arm/boot/dts/dra7.dtsi | 30 ++++++++++++++++++++++++++++++
>>   1 file changed, 30 insertions(+)
> 
>> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
>> index 370009e..4ce1a4f 100644
>> --- a/arch/arm/boot/dts/dra7.dtsi
>> +++ b/arch/arm/boot/dts/dra7.dtsi
> [...]
>> @@ -1267,6 +1269,34 @@
>>               ti,irqs-skip = <10 133 139 140>;
>>               ti,irqs-safe-map = <0>;
>>           };
>> +
>> +        dcan1: d_can@...cc000 {
> 
>    The ePAPR standard has something to say here:
> 
>>>
> The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model. If appropriate, the name should be one of the following choices:
> 
>     • can

Right. I'll fix it up.

>>>
> 
>> +            compatible = "bosch,d_can";
>> +            ti,hwmods = "dcan1";
>> +            reg = <0x4ae3c000 0x2000>,
>> +                  <0x558 0x4>; /* index to RAMINIT reg within syscon */
>> +            raminit-syscon = <&dra7_ctrl_core>;
>> +            raminit-start-bit = <3>;
>> +            raminit-done-bit = <1>;
>> +            raminit-pulse;
> 
>    Hm, aren't the above 4 properties vendor specific? If so, they should start with a vendor prefix and comma.

At least for now I don't know about any other platform other than TI using a RAMINIT register outside the
CAN register space. However the mechanism is generic enough and not limited to TI platforms.

I don't mind vendor prefix or not, but would like to hear the opinion of the CAN maintainers as to what they would prefer.

> 
>> +            interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
>> +            clocks = <&dcan1_sys_clk_mux>;
>> +            status = "disabled";
>> +        };
> 

cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html