lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 27 Nov 2014 22:55:29 +0100
From:	Jiri Pirko <jiri@...nulli.us>
To:	Scott Feldman <sfeldma@...il.com>
Cc:	Jamal Hadi Salim <jhs@...atatu.com>,
	John Fastabend <john.r.fastabend@...el.com>,
	Netdev <netdev@...r.kernel.org>,
	"David S. Miller" <davem@...emloft.net>,
	"nhorman@...driver.com" <nhorman@...driver.com>,
	Andy Gospodarek <andy@...yhouse.net>,
	Thomas Graf <tgraf@...g.ch>,
	"dborkman@...hat.com" <dborkman@...hat.com>,
	"ogerlitz@...lanox.com" <ogerlitz@...lanox.com>,
	"jesse@...ira.com" <jesse@...ira.com>,
	"pshelar@...ira.com" <pshelar@...ira.com>,
	"azhou@...ira.com" <azhou@...ira.com>,
	"ben@...adent.org.uk" <ben@...adent.org.uk>,
	"stephen@...workplumber.org" <stephen@...workplumber.org>,
	"Kirsher, Jeffrey T" <jeffrey.t.kirsher@...el.com>,
	"vyasevic@...hat.com" <vyasevic@...hat.com>,
	Cong Wang <xiyou.wangcong@...il.com>,
	Eric Dumazet <edumazet@...gle.com>,
	Florian Fainelli <f.fainelli@...il.com>,
	Roopa Prabhu <roopa@...ulusnetworks.com>,
	John Linville <linville@...driver.com>,
	"jasowang@...hat.com" <jasowang@...hat.com>,
	"ebiederm@...ssion.com" <ebiederm@...ssion.com>,
	Nicolas Dichtel <nicolas.dichtel@...nd.com>,
	"ryazanov.s.a@...il.com" <ryazanov.s.a@...il.com>,
	"buytenh@...tstofly.org" <buytenh@...tstofly.org>,
	Aviad Raveh <aviadr@...lanox.com>,
	"nbd@...nwrt.org" <nbd@...nwrt.org>,
	Alexei Starovoitov <alexei.starovoitov@...il.com>,
	Neil Jerram <Neil.Jerram@...aswitch.com>,
	"ronye@...lanox.com" <ronye@...lanox.com>,
	"simon.horman@...ronome.com" <simon.horman@...ronome.com>,
	"alexander.h.duyck@...hat.com" <alexander.h.duyck@...hat.com>,
	"Ronciak, John" <john.ronciak@...el.com>,
	"mleitner@...hat.com" <mleitner@...hat.com>,
	Shrijeet Mukherjee <shrijeet@...il.com>,
	Andy Gospodarek <gospo@...ulusnetworks.com>,
	Benjamin LaHaise <bcrl@...ck.org>
Subject: Re: [patch net-next v3 02/17] net: make vid as a parameter for
 ndo_fdb_add/ndo_fdb_del

Thu, Nov 27, 2014 at 09:59:37PM CET, sfeldma@...il.com wrote:
>Ya right now the driver just doesn't call br_fdb_external_learn_add()
>if LEARNING_SYNC is not set.  It's a port driver setting so it seems
>fine to handle it in the port driver.  You could move the check up to
>br_fdb_external_learn_add(), but then you have an extra call every 1s
>for each fdb entry being refreshed.  (1s or whatever the refresh
>frequency is).  Easier to avoid this overhead and make the decision at
>the source.

I have been thinking about moving the check into bridge code, it to make
it there as well as in drivers. This is easily changeable on demenad
later though, so I left this for now.

>
>-scott
>
>On Thu, Nov 27, 2014 at 2:14 AM, Jamal Hadi Salim <jhs@...atatu.com> wrote:
>> On 11/27/14 01:50, Scott Feldman wrote:
>>
>> [..]
>>
>>>
>>> It's there: IFLA_BRPORT_LEARNING_SYNC.  From iproute2:
>>>
>>> $ bridge -d link show dev swp1
>>> 2: swp1 state UNKNOWN : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
>>> master br0 state forwarding priority 32 cost 2
>>>      hairpin off guard off root_block off fastleave off learning off flood
>>> off
>>> 2: swp1 state UNKNOWN : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master
>>> br0
>>>      learning on learning_sync on hwmode swdev
>>>
>>> Turn it off:
>>>
>>> $ bridge link set dev swp1 hwmode swdev learning_sync off
>>>
>>> And now:
>>>
>>> $ bridge -d link show dev swp1
>>> 2: swp1 state UNKNOWN : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
>>> master br0 state forwarding priority 32 cost 2
>>>      hairpin off guard off root_block off fastleave off learning off flood
>>> off
>>> 2: swp1 state UNKNOWN : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master
>>> br0
>>>      learning on learning_sync off hwmode swdev
>>>
>>>
>>
>> Yes, this is the nice control portion.
>> From reviewing the patches, I didnt see how the core to the driver was
>> using the  learning_sync. IOW, how do i turn off the drivers sync
>> from being activated? Maybe you are doing this in the rocker patches
>> which i didnt review? i think this needs to be core infrastructure i.e
>> if you are doing this in a timer (as opposed to interrupt driven), then
>> the core sync timer would kick in and call some driver ops.
>> In any case, details that can be ironed out later..
>>
>> cheers,
>> jamal
>>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ