| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 12 Feb 2015 14:33:46 +0800
From: Hayes Wang <hayeswang@...ltek.com>
To: <netdev@...r.kernel.org>
CC: <nic_swsd@...ltek.com>, <linux-kernel@...r.kernel.org>,
<linux-usb@...r.kernel.org>, Hayes Wang <hayeswang@...ltek.com>
Subject: [PATCH net-next v2 1/3] r8152: separate USB_RX_EARLY_AGG
Separate USB_RX_EARLY_AGG into USB_RX_EARLY_TIMEOUT and USB_RX_EARLY_SIZE.
Replace r8153_set_rx_agg() with r8153_set_rx_early_timeout() and
r8153_set_rx_early_size().
Set the default timeout value according to the USB speed.
Signed-off-by: Hayes Wang <hayeswang@...ltek.com>
---
drivers/net/usb/r8152.c | 58 +++++++++++++++++++++++++++----------------------
1 file changed, 32 insertions(+), 26 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 5980ac6..b2e6566 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -97,7 +97,8 @@
#define USB_TX_AGG 0xd40a
#define USB_RX_BUF_TH 0xd40c
#define USB_USB_TIMER 0xd428
-#define USB_RX_EARLY_AGG 0xd42c
+#define USB_RX_EARLY_TIMEOUT 0xd42c
+#define USB_RX_EARLY_SIZE 0xd42e
#define USB_PM_CTRL_STATUS 0xd432
#define USB_TX_DMA 0xd434
#define USB_TOLERANCE 0xd490
@@ -325,10 +326,10 @@
/* USB_MISC_0 */
#define PCUT_STATUS 0x0001
-/* USB_RX_EARLY_AGG */
-#define EARLY_AGG_SUPPER 0x0e832981
-#define EARLY_AGG_HIGH 0x0e837a12
-#define EARLY_AGG_SLOW 0x0e83ffff
+/* USB_RX_EARLY_TIMEOUT */
+#define COALESCE_SUPER 85000U
+#define COALESCE_HIGH 250000U
+#define COALESCE_SLOW 524280U
/* USB_WDT11_CTRL */
#define TIMER11_EN 0x0001
@@ -578,6 +579,7 @@ struct r8152 {
u32 saved_wolopts;
u32 msg_enable;
u32 tx_qlen;
+ u32 coalesce;
u16 ocp_base;
u8 *intr_buff;
u8 version;
@@ -2114,28 +2116,19 @@ static int rtl8152_enable(struct r8152 *tp)
return rtl_enable(tp);
}
-static void r8153_set_rx_agg(struct r8152 *tp)
+static void r8153_set_rx_early_timeout(struct r8152 *tp)
{
- u8 speed;
+ u32 ocp_data = tp->coalesce / 8;
- speed = rtl8152_get_speed(tp);
- if (speed & _1000bps) {
- if (tp->udev->speed == USB_SPEED_SUPER) {
- ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH,
- RX_THR_SUPPER);
- ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
- EARLY_AGG_SUPPER);
- } else {
- ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH,
- RX_THR_HIGH);
- ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
- EARLY_AGG_HIGH);
- }
- } else {
- ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_SLOW);
- ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
- EARLY_AGG_SLOW);
- }
+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT, ocp_data);
+}
+
+static void r8153_set_rx_early_size(struct r8152 *tp)
+{
+ u32 mtu = tp->netdev->mtu;
+ u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 4;
+
+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data);
}
static int rtl8153_enable(struct r8152 *tp)
@@ -2145,7 +2138,8 @@ static int rtl8153_enable(struct r8152 *tp)
set_tx_qlen(tp);
rtl_set_eee_plus(tp);
- r8153_set_rx_agg(tp);
+ r8153_set_rx_early_timeout(tp);
+ r8153_set_rx_early_size(tp);
return rtl_enable(tp);
}
@@ -3911,6 +3905,18 @@ static int rtl8152_probe(struct usb_interface *intf,
tp->mii.reg_num_mask = 0x1f;
tp->mii.phy_id = R8152_PHY_ID;
+ switch (udev->speed) {
+ case USB_SPEED_SUPER:
+ tp->coalesce = COALESCE_SUPER;
+ break;
+ case USB_SPEED_HIGH:
+ tp->coalesce = COALESCE_HIGH;
+ break;
+ default:
+ tp->coalesce = COALESCE_SLOW;
+ break;
+ }
+
intf->needs_remote_wakeup = 1;
tp->rtl_ops.init(tp);
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists