netdev - [next-queue 4/7] ixgbe: enable relaxed ordering for SPARC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 13 Mar 2015 17:00:45 -0700
From:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:	davem@...emloft.net
Cc:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>, netdev@...r.kernel.org,
	nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
	<kernel-team@...com>,
	Sowmini Varadhan <sowmini.varadhan@...cle.com>
Subject: [next-queue 4/7] ixgbe: enable relaxed ordering for SPARC

This patch makes sure that relaxed ordering is not disabled when
on SPARC, where it helps with performance.

CC: <kernel-team@...com>
CC: Sowmini Varadhan <sowmini.varadhan@...cle.com>
Reported-by: Sowmini Varadhan <sowmini.varadhan@...cle.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@...el.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c  | 8 ++++++--
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 8 ++++++--
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 51628b3..824a7ab 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -171,17 +171,21 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
  *  @hw: pointer to hardware structure
  *
  *  Starts the hardware using the generic start_hw function.
- *  Disables relaxed ordering Then set pcie completion timeout
+ *  Disables relaxed ordering for archs other than SPARC
+ *  Then set pcie completion timeout
  *
  **/
 static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
 {
+#ifndef CONFIG_SPARC
 	u32 regval;
 	u32 i;
+#endif
 	s32 ret_val;
 
 	ret_val = ixgbe_start_hw_generic(hw);
 
+#ifndef CONFIG_SPARC
 	/* Disable relaxed ordering */
 	for (i = 0; ((i < hw->mac.max_tx_queues) &&
 	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
@@ -197,7 +201,7 @@ static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
 			    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
 		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
 	}
-
+#endif
 	if (ret_val)
 		return ret_val;
 
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 13b58f9..06d8f3c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -312,7 +312,6 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
 {
 	u32 i;
-	u32 regval;
 
 	/* Clear the rate limiters */
 	for (i = 0; i < hw->mac.max_tx_queues; i++) {
@@ -321,20 +320,25 @@ s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
 	}
 	IXGBE_WRITE_FLUSH(hw);
 
+#ifndef CONFIG_SPARC
 	/* Disable relaxed ordering */
 	for (i = 0; i < hw->mac.max_tx_queues; i++) {
+		u32 regval;
+
 		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
 		regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
 		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
 	}
 
 	for (i = 0; i < hw->mac.max_rx_queues; i++) {
+		u32 regval;
+
 		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
 		regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
 			    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
 		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
 	}
-
+#endif
 	return 0;
 }
 
-- 
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html