netdev - [net 06/10] e1000e: i219 - increase IPG for speed 10/100 full duplex

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 26 Jun 2015 03:20:36 -0700
From:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:	davem@...emloft.net
Cc:	Yanir Lubetkin <yanirx.lubetkin@...el.com>, netdev@...r.kernel.org,
	nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net 06/10] e1000e: i219 - increase IPG for speed 10/100 full duplex

From: Yanir Lubetkin <yanirx.lubetkin@...el.com>

In SPT/i219, there were CRC errors in speed 10/100 full duplex.
The solution given by the HW team is to increase the IPG from 8 to 0xC

Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@...el.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index c5bb1dd..983f5bf 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1400,16 +1400,20 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 	if (((hw->mac.type == e1000_pch2lan) ||
 	     (hw->mac.type == e1000_pch_lpt) ||
 	     (hw->mac.type == e1000_pch_spt)) && link) {
-		u32 reg;
+		u16 speed, duplex;
 
-		reg = er32(STATUS);
+		e1000e_get_speed_and_duplex_copper(hw, &speed, &duplex);
 		tipg_reg = er32(TIPG);
 		tipg_reg &= ~E1000_TIPG_IPGT_MASK;
 
-		if (!(reg & (E1000_STATUS_FD | E1000_STATUS_SPEED_MASK))) {
+		if (duplex == HALF_DUPLEX && speed == SPEED_10) {
 			tipg_reg |= 0xFF;
 			/* Reduce Rx latency in analog PHY */
 			emi_val = 0;
+		} else if (hw->mac.type == e1000_pch_spt &&
+			   duplex == FULL_DUPLEX && speed != SPEED_1000) {
+			tipg_reg |= 0xC;
+			emi_val = 1;
 		} else {
 
 			/* Roll back the default values */
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html