Date:	Tue, 14 Jul 2015 08:32:05 -0700
From:	anuradhak@...ulusnetworks.com
To:	davem@...emloft.net, sfeldma@...il.com
Cc:	netdev@...r.kernel.org, roopa@...ulusnetworks.com,
	gospo@...ulusnetworks.com, wkok@...ulusnetworks.com,
	anuradhak@...ulusnetworks.com
Subject: [PATCH net-next v6 0/4] net: Introduce protodown flag.

From: Anuradha Karuppiah <anuradhak@...ulusnetworks.com>

User space daemons can detect errors in the network that need to be
notified to the switch device drivers.

Drivers can react to this error state by doing a phy-down on the
switch-port which would result in a carrier-off locally and on the directly
connected switch. Doing that would prevent loops and black-holes in the
network.

One such use case is the multi-chassis LAG application -

1. The MLAG application runs on peer switches (say Switch0 and Switch1)
   synchronizing states, forwarding entries etc. between the two
   switches over the peer-link (this is a link directly connecting the
   two switches).
2. An MLAG election process designates one of the switches as a primary
   (for e.g. Switch0 is primary and Switch1 is secondary).
3. The peer link plays a critical role in allowing Switch0-Switch1 to
   function as a single LAG partner to the downstream dual-connected
   servers. When the peer-link between the switches goes down we have a
   split-brain situation. Switch0 and Switch1 are no longer in sync and
   are acting independently. This can result in traffic loops and
   traffic black-holing in the network.
4. To prevent these problems the MLAG application on the secondary
   switch phy-downs the MLAG ports on detecting the peer-link down.
   This will be seen as a carrier down on servers that are
   dual-connected to Switch0 and Switch1.
5. Specifically a dual-connected server will see a carrier-down on the
   port connected to the MLAG secondary, Switch1, and will stop using
   that port for traffic TX. So traffic black holing is prevented.

v5 to v6:
   Replaced proto_flags with a simple proto_down boolean attribute in
   response to Dave's comments.

v4 to v5:
   Changed the ip link display format for protodown to match the set as
   recommended by Stephen. 

v3 to v4:
   I have moved protodown out of IFF_XXX and introduced a separate
   proto_flags field with IF_PROTOF_DOWN bit being used by apps to notify
   switch port errors. This is in response to Stephen's comments that
   adding a new IFF_XXX may break user space.

   I have used rocker as the sample switch driver. And to test this
   functionality I used the qemu-rocker patch that Scott sent out in response
   to the v3 posting (needed to set link up/down when phy is
   enabled/disabled).

v1 to v2:
   Based on Dave's suggestion I have moved out aggregating of error bits
   across applications to a user space framework. This patch now simply
   notifies an aggregated error bit to drivers enabling them to handle
   the error gracefully.


Anuradha Karuppiah (4):
  net core: Add protodown support.
  netlink: changes for setting and clearing protodown via netlink.
  rocker: Handle protodown notifications.
  ip link: proto_down config and display.

Signed-off-by: Anuradha Karuppiah <anuradhak@...ulusnetworks.com>
Signed-off-by: Andy Gospodarek <gospo@...ulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@...ulusnetworks.com>
Signed-off-by: Wilson Kok <wkok@...ulusnetworks.com>

 drivers/net/ethernet/rocker/rocker.c |   19 ++++++++++++++++++-
 include/linux/netdevice.h            |   14 ++++++++++++++
 include/uapi/linux/if_link.h         |    1 +
 net/core/dev.c                       |   20 ++++++++++++++++++++
 net/core/net-sysfs.c                 |   14 ++++++++++++++
 net/core/rtnetlink.c                 |   16 ++++++++++++++--
 6 files changed, 81 insertions(+), 3 deletions(-)

-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists