lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Fri, 17 Jul 2015 17:38:30 +0200 From: Wolfgang Walter <linux@...m.de> To: Herbert Xu <herbert@...dor.apana.org.au> Cc: netdev@...r.kernel.org, Tom Herbert <tom@...bertland.com> Subject: Re: sit: Set SKB_GSO_SIT bit when performing GRO Am Freitag, 17. Juli 2015, 09:56:51 schrieb Herbert Xu: > On Thu, Jul 16, 2015 at 12:58:45PM +0200, Wolfgang Walter wrote: > > Am Donnerstag, 16. Juli 2015, 08:23:50 schrieb Herbert Xu: > > > On Wed, Jul 15, 2015 at 02:25:59PM +0200, Wolfgang Walter wrote: > > > > Yes. Switching TSO off and leaving GRO on works, too. > > > > > > OK, could you please try this patch? > > > > Patch works here. > > Thanks for the confirmation. Let's add a tag for patchwork: > > Tested-by: Wolfgang Walter <linux@...m.de> It seems that this patch may cause a problem with another one of our routers. Without the patch it had no problem, so I didn't tested it there. With that patch one interface blocks after some time. Not even arp requests get answered. It still receives packets though. Restarting the interface fixes the problem. Switching off gro for the other interface helps. This router is different from the other ones. It does not directly route isatap packets. It may routes isatap packets encapsulated in GRE packets, though. It is itself not an GRE-endpoint. The router does NAT. Basically it routes the GRE-tunnel packets unatted and NATs most of the rest. Not doing NAT and conntrack (and unloading all modules like nf_conntrack_ipv4, nf_defrag_ipv4) does not help. eth0: extern eth1: intern One (IPv4) GRE-tunnel is routed between eth0 und eth1. IPv6 ESP-tunnels are routed between eth0 and eth1 IPv4 UDP/TCP/ICMP from intern is natted with netfilter. eth1 stops sending with the patch after some time disabling gro on eth0 helps disabling tso or gso on eth0 and/or eth1 or both does not help eth0 and eth1 are both intel I350. Regards, -- Wolfgang Walter Studentenwerk München Anstalt des öffentlichen Rechts -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists