netdev - [net-next 17/18] fm10k: Only trigger data path reset if fabric is up

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 15 Sep 2015 17:36:42 -0700
From:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:	davem@...emloft.net
Cc:	Alexander Duyck <alexander.duyck@...hat.com>,
	netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com,
	jogreene@...hat.com,
	Alexander Duyck <alexander.h.duyck@...hat.com>,
	Jacob Keller <jacob.e.keller@...el.com>,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 17/18] fm10k: Only trigger data path reset if fabric is up

From: Alexander Duyck <alexander.duyck@...hat.com>

This change makes it so that we only trigger the data path reset if the
fabric is ready to handle traffic.  The general idea is to avoid
triggering the reset unless the switch API is ready for us.  Otherwise
we can just postpone the reset until we receive a switch ready
notification.

Signed-off-by: Alexander Duyck <alexander.h.duyck@...hat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/fm10k/fm10k_pf.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
index 241b969..d806d87 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
@@ -59,6 +59,11 @@ static s32 fm10k_reset_hw_pf(struct fm10k_hw *hw)
 	if (reg & (FM10K_DMA_CTRL_TX_ACTIVE | FM10K_DMA_CTRL_RX_ACTIVE))
 		return FM10K_ERR_DMA_PENDING;
 
+	/* verify the switch is ready for reset */
+	reg = fm10k_read_reg(hw, FM10K_DMA_CTRL2);
+	if (!(reg & FM10K_DMA_CTRL2_SWITCH_READY))
+		goto out;
+
 	/* Inititate data path reset */
 	reg |= FM10K_DMA_CTRL_DATAPATH_RESET;
 	fm10k_write_reg(hw, FM10K_DMA_CTRL, reg);
@@ -72,6 +77,7 @@ static s32 fm10k_reset_hw_pf(struct fm10k_hw *hw)
 	if (!(reg & FM10K_IP_NOTINRESET))
 		err = FM10K_ERR_RESET_FAILED;
 
+out:
 	return err;
 }
 
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html