netdev - Re: [PATCH RFC 4/6] net/faraday: Replace use_nc_si with use

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 09 Nov 2015 11:30:35 +1100
From:	Benjamin Herrenschmidt <benh@...nel.crashing.org>
To:	Gavin Shan <gwshan@...ux.vnet.ibm.com>, netdev@...r.kernel.org
Cc:	davem@...emloft.net, sergei.shtylyov@...entembedded.com
Subject: Re: [PATCH RFC 4/6] net/faraday: Replace use_nc_si with use_ncsi

On Mon, 2015-11-09 at 11:10 +1100, Gavin Shan wrote:
> This replaces variable name "use_nc_si" with "use_ncsi". No logical
> changes introduced.

This driver patch is against an internal tree, not upstream. Please
ignore. The upstream driver doesn't have any concept of "nc_si".

Gavin, next time you respin the series, make sure it's against
upstream.

Cheers,
Ben.

> Signed-off-by: Gavin Shan <gwshan@...ux.vnet.ibm.com>
> ---
>  drivers/net/ethernet/faraday/ftgmac100.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/ethernet/faraday/ftgmac100.c
> b/drivers/net/ethernet/faraday/ftgmac100.c
> index 08e0336..778bee8 100644
> --- a/drivers/net/ethernet/faraday/ftgmac100.c
> +++ b/drivers/net/ethernet/faraday/ftgmac100.c
> @@ -75,7 +75,7 @@ struct ftgmac100 {
>  	struct phy_device *phydev;
>  	int old_speed;
>  
> -	bool use_nc_si;
> +	bool use_ncsi;
>  };
>  
>  static int ftgmac100_alloc_rx_page(struct ftgmac100 *priv,
> @@ -1150,11 +1150,11 @@ static int ftgmac100_open(struct net_device
> *netdev)
>  		goto err_hw;
>  
>  	ftgmac100_init_hw(priv);
> -	ftgmac100_start_hw(priv, priv->use_nc_si ? 100 : 10);
> +	ftgmac100_start_hw(priv, priv->use_ncsi ? 100 : 10);
>  
>  	if (priv->phydev)
>  		phy_start(priv->phydev);
> -	else if (priv->use_nc_si)
> +	else if (priv->use_ncsi)
>  		netif_carrier_on(priv->netdev);
>  
>  	napi_enable(&priv->napi);
> @@ -1275,7 +1275,7 @@ err_alloc_mdiobus:
>  
>  static void ftgmac100_destroy_mdio(struct ftgmac100 *priv)
>  {
> -	if (!priv->use_nc_si)
> +	if (!priv->use_ncsi)
>  		return;
>  	phy_disconnect(priv->phydev);
>  	mdiobus_unregister(priv->mii_bus);
> @@ -1359,9 +1359,9 @@ static int ftgmac100_probe(struct
> platform_device *pdev)
>  	/* Check for NC-SI mode */
>  	if (pdev->dev.of_node &&
>  	    of_get_property(pdev->dev.of_node, "use-nc-si", NULL))
> -		priv->use_nc_si = true;
> +		priv->use_ncsi = true;
>  	else
> -		priv->use_nc_si = false;
> +		priv->use_ncsi = false;
>  
>  	/* If we use NC-SI, we need to set that up, which isn't
> implemented yet
>  	 * so we pray things were setup by the bootloader and just
> mark our link
> @@ -1370,7 +1370,7 @@ static int ftgmac100_probe(struct
> platform_device *pdev)
>  	 * Eventually, we'll have a proper NC-SI stack as a helper
> we can
>  	 * instanciate
>  	 */
> -	if (priv->use_nc_si) {
> +	if (priv->use_ncsi) {
>  		/* XXX */
>  		priv->phydev = NULL;
>  		dev_info(&pdev->dev, "Using NC-SI interface\n");
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html