| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 3 Jan 2016 16:26:04 +0100
From: John Crispin <blogic@...nwrt.org>
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, linux-mips@...ux-mips.org,
linux-mediatek@...ts.infradead.org,
John Crispin <blogic@...nwrt.org>,
Felix Fietkau <nbd@....name>, Michael Lee <igvtee@...il.com>,
Steven Liu (劉人豪)
<steven.liu@...iatek.com>,
Fred Chang (張嘉宏)
<Fred.Chang@...iatek.com>
Subject: [PATCH 01/12] Documentation: DT: net: add docs for ralink/mediatek SoC ethernet binding
Add three files. ralink,rt2880-net.txt descibes the actual frame engine
and the other two describe the switch forntend bindings.
Signed-off-by: John Crispin <blogic@...nwrt.org>
Signed-off-by: Felix Fietkau <nbd@...nwrt.org>
Signed-off-by: Michael Lee <igvtee@...il.com>
Cc: devicetree@...r.kernel.org
---
.../bindings/net/mediatek,mt7620-gsw.txt | 26 +++++++++
.../devicetree/bindings/net/ralink,rt2880-net.txt | 61 ++++++++++++++++++++
.../devicetree/bindings/net/ralink,rt3050-esw.txt | 32 ++++++++++
3 files changed, 119 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
create mode 100644 Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
create mode 100644 Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
diff --git a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
new file mode 100644
index 0000000..aa63130
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
@@ -0,0 +1,26 @@
+Mediatek Gigabit Switch
+=======================
+
+The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621).
+
+Required properties:
+- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the gigabit switches interrupt
+- resets: Should contain the gigabit switches resets
+- reset-names: Should contain the reset names "gsw"
+
+Example:
+
+gsw@...10000 {
+ compatible = "ralink,mt7620-gsw";
+ reg = <0x10110000 8000>;
+
+ resets = <&rstctrl 23>;
+ reset-names = "gsw";
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+};
diff --git a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
new file mode 100644
index 0000000..88b095d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
@@ -0,0 +1,61 @@
+Ralink Frame Engine Ethernet controller
+=======================================
+
+The Ralink frame engine ethernet controller can be found on Ralink and
+Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8).
+
+Depending on the SoC, there is a number of ports connected to the CPU port
+directly and/or via a (gigabit-)switch.
+
+* Ethernet controller node
+
+Required properties:
+- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth",
+ "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth",
+ "mediatek,mt7620-eth", "mediatek,mt7621-eth"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the frame engines interrupt
+- resets: Should contain the frame engines resets
+- reset-names: Should contain the reset names "fe". If a switch is present
+ "esw" is also required.
+
+
+* Ethernet port node
+
+Required properties:
+- compatible: Should be "ralink,eth-port"
+- reg: The number of the physical port
+- phy-handle: reference to the node describing the phy
+
+Example:
+
+mdio-bus {
+ ...
+ phy0: ethernet-phy@0 {
+ phy-mode = "mii";
+ reg = <0>;
+ };
+};
+
+ethernet@...000 {
+ compatible = "ralink,rt2880-eth";
+ reg = <0x00400000 10000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ resets = <&rstctrl 18>;
+ reset-names = "fe";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <5>;
+
+ port@0 {
+ compatible = "ralink,eth-port";
+ reg = <0>;
+ phy-handle = <&phy0>;
+ };
+
+};
diff --git a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
new file mode 100644
index 0000000..2e79bd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
@@ -0,0 +1,32 @@
+Ralink Fast Ethernet Embedded Switch
+====================================
+
+The ralink fast ethernet embedded switch can be found on Ralink and Mediatek
+SoCs (RT3x5x, RT5350, MT76x8).
+
+Required properties:
+- compatible: Should be "ralink,rt3050-esw"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the embedded switches interrupt
+- resets: Should contain the embedded switches resets
+- reset-names: Should contain the reset names "esw"
+
+Optional properties:
+- ralink,portmap: can be used to choose if the default switch setup is
+ llllw or wllll
+- ralink,led_polarity: override the active high/low settings of the leds
+
+Example:
+
+esw@...10000 {
+ compatible = "ralink,rt3050-esw";
+ reg = <0x10110000 8000>;
+
+ resets = <&rstctrl 23>;
+ reset-names = "esw";
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists