| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 06 Feb 2016 10:05:51 +0100
From: Robert Jarzmik <robert.jarzmik@...e.fr>
To: g.liakhovetski@....de, mitake@....info.waseda.ac.jp,
fabio.estevam@...escale.com
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
David Miller <davem@...emloft.net>
Subject: Re: [PATCH] net: smc911x: convert pxa dma to dmaengine
David Miller <davem@...emloft.net> writes:
> From: Robert Jarzmik <robert.jarzmik@...e.fr>
> Date: Fri, 05 Feb 2016 22:44:56 +0100
>
>> Apart from Alberto who answered he cannot test it by lack of hardware, the
>> others didn't answer.
>>
>> So how can I move forward ? Would you want me to amend the KConfig to add a "&&
>> !ARCH_PXA" on the "depend" line ?
>
> Please just keep pinging people to properly test this.
Okay, let's have another try.
Hi Guennadi, Hitoshi, Fabio,
Could any of you try this patch to ensure your board is not broken please ?
I've re-added the patch at the end of this mail for easier handling. Normally no
code path in non-PXA board is changed, so the test should be straightforward.
It's also available in : https://lkml.org/lkml/2015/11/30/768
You're the maintainers of the following boards using smc911x AFAIK:
- sh2007: Guennadi and Hitoshi
- armadillo5x0: Alberto
- imx v6 and imx v7: Fabio
Cheers.
--
Robert
---8<---
From: Robert Jarzmik <robert.jarzmik@...e.fr>
Subject: [PATCH] net: smc911x: convert pxa dma to dmaengine
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org, Robert Jarzmik <robert.jarzmik@...e.fr>
Date: Mon, 30 Nov 2015 22:40:28 +0100 (9 weeks, 4 days, 11 hours ago)
Message-Id: <1448919628-13273-1-git-send-email-robert.jarzmik@...e.fr>
X-Mailer: git-send-email 2.1.4
Convert the dma transfers to be dmaengine based, now pxa has a dmaengine
slave driver. This makes this driver a bit more PXA agnostic.
The driver was only compile tested. The risk is quite small as no
current PXA platform I'm aware of is using smc911x driver.
Signed-off-by: Robert Jarzmik <robert.jarzmik@...e.fr>
---
drivers/net/ethernet/smsc/smc911x.c | 85 ++++++++++++++++++++++++-------------
drivers/net/ethernet/smsc/smc911x.h | 63 ++++++++++++---------------
2 files changed, 82 insertions(+), 66 deletions(-)
diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index bd64eb982e52..3f5711061432 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -73,6 +73,9 @@ static const char version[] =
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
+
#include <asm/io.h>
#include "smc911x.h"
@@ -1174,18 +1177,16 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id)
#ifdef SMC_USE_DMA
static void
-smc911x_tx_dma_irq(int dma, void *data)
+smc911x_tx_dma_irq(void *data)
{
- struct net_device *dev = (struct net_device *)data;
- struct smc911x_local *lp = netdev_priv(dev);
+ struct smc911x_local *lp = data;
+ struct net_device *dev = lp->netdev;
struct sk_buff *skb = lp->current_tx_skb;
unsigned long flags;
DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "TX DMA irq handler\n");
- /* Clear the DMA interrupt sources */
- SMC_DMA_ACK_IRQ(dev, dma);
BUG_ON(skb == NULL);
dma_unmap_single(NULL, tx_dmabuf, tx_dmalen, DMA_TO_DEVICE);
dev->trans_start = jiffies;
@@ -1208,18 +1209,16 @@ smc911x_tx_dma_irq(int dma, void *data)
"TX DMA irq completed\n");
}
static void
-smc911x_rx_dma_irq(int dma, void *data)
+smc911x_rx_dma_irq(void *data)
{
- struct net_device *dev = (struct net_device *)data;
- struct smc911x_local *lp = netdev_priv(dev);
+ struct smc911x_local *lp = data;
+ struct net_device *dev = lp->netdev;
struct sk_buff *skb = lp->current_rx_skb;
unsigned long flags;
unsigned int pkts;
DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev, "RX DMA irq handler\n");
- /* Clear the DMA interrupt sources */
- SMC_DMA_ACK_IRQ(dev, dma);
dma_unmap_single(NULL, rx_dmabuf, rx_dmalen, DMA_FROM_DEVICE);
BUG_ON(skb == NULL);
lp->current_rx_skb = NULL;
@@ -1792,6 +1791,9 @@ static int smc911x_probe(struct net_device *dev)
unsigned int val, chip_id, revision;
const char *version_string;
unsigned long irq_flags;
+ struct dma_slave_config config;
+ dma_cap_mask_t mask;
+ struct pxad_param param;
DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
@@ -1963,11 +1965,40 @@ static int smc911x_probe(struct net_device *dev)
goto err_out;
#ifdef SMC_USE_DMA
- lp->rxdma = SMC_DMA_REQUEST(dev, smc911x_rx_dma_irq);
- lp->txdma = SMC_DMA_REQUEST(dev, smc911x_tx_dma_irq);
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ param.prio = PXAD_PRIO_LOWEST;
+ param.drcmr = -1UL;
+
+ lp->rxdma =
+ dma_request_slave_channel_compat(mask, pxad_filter_fn,
+ ¶m, &dev->dev, "rx");
+ lp->txdma =
+ dma_request_slave_channel_compat(mask, pxad_filter_fn,
+ ¶m, &dev->dev, "tx");
lp->rxdma_active = 0;
lp->txdma_active = 0;
- dev->dma = lp->rxdma;
+
+ memset(&config, 0, sizeof(config));
+ config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ config.src_addr = lp->physaddr + RX_DATA_FIFO;
+ config.dst_addr = lp->physaddr + TX_DATA_FIFO;
+ config.src_maxburst = 32;
+ config.dst_maxburst = 32;
+ retval = dmaengine_slave_config(lp->rxdma, &config);
+ if (retval) {
+ dev_err(lp->dev, "dma rx channel configuration failed: %d\n",
+ retval);
+ goto err_out;
+ }
+ retval = dmaengine_slave_config(lp->txdma, &config);
+ if (retval) {
+ dev_err(lp->dev, "dma tx channel configuration failed: %d\n",
+ retval);
+ goto err_out;
+ }
#endif
retval = register_netdev(dev);
@@ -1978,11 +2009,11 @@ static int smc911x_probe(struct net_device *dev)
dev->base_addr, dev->irq);
#ifdef SMC_USE_DMA
- if (lp->rxdma != -1)
- pr_cont(" RXDMA %d", lp->rxdma);
+ if (lp->rxdma)
+ pr_cont(" RXDMA %p", lp->rxdma);
- if (lp->txdma != -1)
- pr_cont(" TXDMA %d", lp->txdma);
+ if (lp->txdma)
+ pr_cont(" TXDMA %p", lp->txdma);
#endif
pr_cont("\n");
if (!is_valid_ether_addr(dev->dev_addr)) {
@@ -2005,12 +2036,10 @@ static int smc911x_probe(struct net_device *dev)
err_out:
#ifdef SMC_USE_DMA
if (retval) {
- if (lp->rxdma != -1) {
- SMC_DMA_FREE(dev, lp->rxdma);
- }
- if (lp->txdma != -1) {
- SMC_DMA_FREE(dev, lp->txdma);
- }
+ if (lp->rxdma)
+ dma_release_channel(lp->rxdma);
+ if (lp->txdma)
+ dma_release_channel(lp->txdma);
}
#endif
return retval;
@@ -2112,12 +2141,10 @@ static int smc911x_drv_remove(struct platform_device *pdev)
#ifdef SMC_USE_DMA
{
- if (lp->rxdma != -1) {
- SMC_DMA_FREE(dev, lp->rxdma);
- }
- if (lp->txdma != -1) {
- SMC_DMA_FREE(dev, lp->txdma);
- }
+ if (lp->rxdma)
+ dma_release_channel(lp->rxdma);
+ if (lp->txdma)
+ dma_release_channel(lp->txdma);
}
#endif
iounmap(lp->base);
diff --git a/drivers/net/ethernet/smsc/smc911x.h b/drivers/net/ethernet/smsc/smc911x.h
index 04b35f55df97..fa528ea0ea51 100644
--- a/drivers/net/ethernet/smsc/smc911x.h
+++ b/drivers/net/ethernet/smsc/smc911x.h
@@ -101,8 +101,8 @@ struct smc911x_local {
#ifdef SMC_USE_DMA
/* DMA needs the physical address of the chip */
u_long physaddr;
- int rxdma;
- int txdma;
+ struct dma_chan *rxdma;
+ struct dma_chan *txdma;
int rxdma_active;
int txdma_active;
struct sk_buff *current_rx_skb;
@@ -210,27 +210,6 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg,
#ifdef SMC_USE_PXA_DMA
-#include <mach/dma.h>
-
-/*
- * Define the request and free functions
- * These are unfortunately architecture specific as no generic allocation
- * mechanism exits
- */
-#define SMC_DMA_REQUEST(dev, handler) \
- pxa_request_dma(dev->name, DMA_PRIO_LOW, handler, dev)
-
-#define SMC_DMA_FREE(dev, dma) \
- pxa_free_dma(dma)
-
-#define SMC_DMA_ACK_IRQ(dev, dma) \
-{ \
- if (DCSR(dma) & DCSR_BUSERR) { \
- netdev_err(dev, "DMA %d bus error!\n", dma); \
- } \
- DCSR(dma) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR; \
-}
-
/*
* Use a DMA for RX and TX packets.
*/
@@ -238,6 +217,8 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg,
static dma_addr_t rx_dmabuf, tx_dmabuf;
static int rx_dmalen, tx_dmalen;
+static void smc911x_rx_dma_irq(void *data);
+static void smc911x_tx_dma_irq(void *data);
#ifdef SMC_insl
#undef SMC_insl
@@ -246,8 +227,10 @@ static int rx_dmalen, tx_dmalen;
static inline void
smc_pxa_dma_insl(struct smc911x_local *lp, u_long physaddr,
- int reg, int dma, u_char *buf, int len)
+ int reg, struct dma_chan *dma, u_char *buf, int len)
{
+ struct dma_async_tx_descriptor *tx;
+
/* 64 bit alignment is required for memory to memory DMA */
if ((long)buf & 4) {
*((u32 *)buf) = SMC_inl(lp, reg);
@@ -258,12 +241,14 @@ smc_pxa_dma_insl(struct smc911x_local *lp, u_long physaddr,
len *= 4;
rx_dmabuf = dma_map_single(lp->dev, buf, len, DMA_FROM_DEVICE);
rx_dmalen = len;
- DCSR(dma) = DCSR_NODESC;
- DTADR(dma) = rx_dmabuf;
- DSADR(dma) = physaddr + reg;
- DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
- DCMD_WIDTH4 | DCMD_ENDIRQEN | (DCMD_LENGTH & rx_dmalen));
- DCSR(dma) = DCSR_NODESC | DCSR_RUN;
+ tx = dmaengine_prep_slave_single(dma, rx_dmabuf, rx_dmalen,
+ DMA_DEV_TO_MEM, 0);
+ if (tx) {
+ tx->callback = smc911x_rx_dma_irq;
+ tx->callback_param = lp;
+ dmaengine_submit(tx);
+ dma_async_issue_pending(dma);
+ }
}
#endif
@@ -274,8 +259,10 @@ smc_pxa_dma_insl(struct smc911x_local *lp, u_long physaddr,
static inline void
smc_pxa_dma_outsl(struct smc911x_local *lp, u_long physaddr,
- int reg, int dma, u_char *buf, int len)
+ int reg, struct dma_chan *dma, u_char *buf, int len)
{
+ struct dma_async_tx_descriptor *tx;
+
/* 64 bit alignment is required for memory to memory DMA */
if ((long)buf & 4) {
SMC_outl(*((u32 *)buf), lp, reg);
@@ -286,12 +273,14 @@ smc_pxa_dma_outsl(struct smc911x_local *lp, u_long physaddr,
len *= 4;
tx_dmabuf = dma_map_single(lp->dev, buf, len, DMA_TO_DEVICE);
tx_dmalen = len;
- DCSR(dma) = DCSR_NODESC;
- DSADR(dma) = tx_dmabuf;
- DTADR(dma) = physaddr + reg;
- DCMD(dma) = (DCMD_INCSRCADDR | DCMD_BURST32 |
- DCMD_WIDTH4 | DCMD_ENDIRQEN | (DCMD_LENGTH & tx_dmalen));
- DCSR(dma) = DCSR_NODESC | DCSR_RUN;
+ tx = dmaengine_prep_slave_single(dma, tx_dmabuf, tx_dmalen,
+ DMA_DEV_TO_MEM, 0);
+ if (tx) {
+ tx->callback = smc911x_tx_dma_irq;
+ tx->callback_param = lp;
+ dmaengine_submit(tx);
+ dma_async_issue_pending(dma);
+ }
}
#endif
#endif /* SMC_USE_PXA_DMA */
--
2.1.4
Powered by blists - more mailing lists