[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date: Thu, 3 Mar 2016 10:15:55 +0100
From: Bernhard Walle <bernhard@...lle.de>
To: davem@...emloft.net
Cc: arnd@...db.de, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, Bernhard Walle <bernhard@...lle.de>
Subject: [PATCH] net: fec: Rename "phy-reset-active-low" property
>From the perspective of RESET, the meaning of the new property
is actually "active high". Thanks for Troy Kisky for pointing
that out.
Since the patch is in linux-next, this patch is incremental and doesn't
replace the original patch.
Signed-off-by: Bernhard Walle <bernhard@...lle.de>
---
Documentation/devicetree/bindings/net/fsl-fec.txt | 2 +-
drivers/net/ethernet/freescale/fec_main.c | 8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index a4799ff..b037a9d 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -12,7 +12,7 @@ Optional properties:
only if property "phy-reset-gpios" is available. Missing the property
will have the duration be 1 millisecond. Numbers greater than 1000 are
invalid and 1 millisecond will be used instead.
-- phy-reset-active-low : If present then the reset sequence using the GPIO
+- phy-reset-active-high : If present then the reset sequence using the GPIO
specified in the "phy-reset-gpios" property is reversed (H=reset state,
L=operation state).
- phy-supply : regulator that powers the Ethernet PHY.
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index bad0ba2..37c0815 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3191,7 +3191,7 @@ static int fec_enet_init(struct net_device *ndev)
static void fec_reset_phy(struct platform_device *pdev)
{
int err, phy_reset;
- bool active_low = false;
+ bool active_high = false;
int msec = 1;
struct device_node *np = pdev->dev.of_node;
@@ -3207,17 +3207,17 @@ static void fec_reset_phy(struct platform_device *pdev)
if (!gpio_is_valid(phy_reset))
return;
- active_low = of_property_read_bool(np, "phy-reset-active-low");
+ active_high = of_property_read_bool(np, "phy-reset-active-high");
err = devm_gpio_request_one(&pdev->dev, phy_reset,
- active_low ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
+ active_high ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
"phy-reset");
if (err) {
dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
return;
}
msleep(msec);
- gpio_set_value_cansleep(phy_reset, !active_low);
+ gpio_set_value_cansleep(phy_reset, !active_high);
}
#else /* CONFIG_OF */
static void fec_reset_phy(struct platform_device *pdev)
--
2.7.2
Powered by blists - more mailing lists