Date:	Mon, 7 Mar 2016 18:09:42 -0500
From:	Murali Karicheri <m-karicheri2@...com>
To:	Andrew Lunn <andrew@...n.ch>
CC:	<jiri@...nulli.us>, <sfeldma@...il.com>, <netdev@...r.kernel.org>
Subject: Re: Question on switchdev

On 03/03/2016 05:32 PM, Murali Karicheri wrote:
> On 02/29/2016 05:29 PM, Andrew Lunn wrote:
>> On Mon, Feb 29, 2016 at 04:43:16PM -0500, Murali Karicheri wrote:
>>
>> Hi Murali
>>
>> Please can you get your email client to wrap lines at ~ 75 characters.
> Hi Andrew,
> 
> Thanks for responding. I have tried the instruction below and
> it doesn't seem to work for me. Do you know what will I have to
> set in thunderbird to do this?
> 
> http://arapulido.com/2009/12/01/enabling-line-wrapping-in-thunderbird/
> 
>>> TI Keystone netcp h/w has a switch. It has n slave ports and 1 host
>>> port. Currently the netcp driver disables the switch functionality
>>> which makes them appear as n nic ports. However we have requirement
>>> to add switch support in the driver. I have reviewed the
>>> experimental driver documentation
>>> Documentation/networking/switchdev.txt and would like to understand
>>> it better so that I can add this support to keystone netcp driver.
>>  
>>> NetCP h/w has a 1 (host port) x n (slave port) switch. It can do
>>> layer 2 forwarding between ports. In the switch mode, host driver
>>> provides the frame to the switch and switch uses the filter data
>>> base (AKA ALE table, Address Learning Engine table) to forward the
>>> packet. There is a piece of information available per frame (meta
>>> data) to decide if frame to be forwarded to a particular port or use
>>> the fdb for forward decisions.
>>
>> This makes is sound like a good fit for DSA.
>>
>> Documentation/networking/dsa/dsa.txt.
> 
> Let me check and get back to you on this and below after reading
> the above.
> 
> Murali
> 
>>
>> You probably need to implement a new tagging protocol in
>> net/dsa/tag_*.c and a driver in drivers/net/dsa/
>>
>>> 1. How does port netdev differ from regular netdev that carries data
>>>    when registering netdev? Any example you can point to?
>>
>> They don't differ at all. You consider each port of the switch to be a
>> normal Linux interface.
>>
>>> 2. I assume port netdev will appear as an interface in ifconfig -a
>>>    command and it is not assigned an IP address. Correct?
>>
>> The user can assign an address, if they want. It is a normal Linux
>> interface. They can also create a bridge, and add the interface to the
>> bridge. An advanced DSA driver will keep track of which interfaces are
>> in which bridge, and if possible, offload the bridge to the hardware.
>>
>>> 3. with 1xn switch, so we have n + 1 netdev registered with net
>>>    core? I assume, only 1 netdev is for data plane and the rest are
>>>    control plane. Is this correct?
>>
>> No. You only have netdev devices for the external ports of the
>> switch. The other port is known as the cpu port, and does not have a
>> netdev.
>>
>>> 4. We have bunch of port specific configuration that we would like
>>> to control or configure from use space using standard tools. For
>>> example, switch port state, flow control etc. Is that possible to
>>> add using this framework? ethtool update needed for this?
>>
>> The whole idea here is that the switch ports are normal Linux
>> interface. You use normal linux APIs to configure them. You probably
>> don't need to add any new features.
>>
>> One key things to get your head around. The switch is a hardware
>> accelerator for the Linux stack. You have to think how you can make
>> your switch accelerate the Linux stack. It takes people a while to get
>> this.
>>
>>       Andrew
>>
> 
> 
Andrew,

>From the high level, it looks like netcp switch meets the specifications
of a DSA hardware. Can you point me to a specific implementation that
I can use as an example to implement this for netcp?

-- 
Murali Karicheri
Linux Kernel, Keystone

Powered by blists - more mailing lists