| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 9 Mar 2016 11:39:25 +0100
From: Giuseppe CAVALLARO <peppe.cavallaro@...com>
To: Gabriel Fernandez <gabriel.fernandez@...aro.org>
CC: <netdev@...r.kernel.org>,
Andreas Färber <afaerber@...e.de>,
<fschaefer.oss@...glemail.com>, Dinh Nguyen <dinh.linux@...il.com>,
"David S. Miller" <davem@...emloft.net>
Subject: Re: [PATCH (net.git) 2/2] stmmac: fix MDIO settings
Hi Gabriel
On 3/9/2016 11:27 AM, Gabriel Fernandez wrote:
> Hi Peppe,
>
> You missed something like that in stmmac_main.c ?
>
> @@ -864,13 +864,12 @@ static int stmmac_init_phy(struct net_device *dev)
> phy_disconnect(phydev);
> return -ENODEV;
> }
>
> /* If attached to a switch, there is no reason to poll phy handler */
> - if (priv->plat->phy_bus_name)
> - if (!strcmp(priv->plat->phy_bus_name, "fixed"))
> - phydev->irq = PHY_IGNORE_INTERRUPT;
> + if (priv->plat->is_fixed_link)
> + phydev->irq = PHY_IGNORE_INTERRUPT;
this is for net.git where this if condition code is not present.
I will propose a patch for net-next later.
I'd like to try to fix the new regression on xmit.
thx to have spot this.
Regards
peppe
>
>
> Best regards
>
> Gabriel
>
>
> On 9 March 2016 at 10:00, Giuseppe Cavallaro <peppe.cavallaro@...com> wrote:
>> Initially the phy_bus_name was added to manipulate the
>> driver name but It was recently just used to manage the
>> fixed-link and then to take some decision at run-time
>> inside the main (for example to skip EEE).
>>
>> So the patch now introduces a new platforms boolean to
>> manage that and removes the phy_bus_name variable not
>> necessary anymore.
>>
>> The driver can manage the mdio registration by using phy-handle,
>> dwmac-mdio and own parameter e.g. snps,phy-addr.
>> This patch takes care about all these possible configurations
>> and fixes the mdio registration in case of there is a real
>> transceiver or a switch (that needs to be managed by using
>> fixed-link).
>>
>> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@...com>
>> Cc: Gabriel Fernandez <gabriel.fernandez@...aro.org>
>> Cc: Andreas Färber <afaerber@...e.de>
>> Cc: Frank Schäfer <fschaefer.oss@...glemail.com>
>> Cc: Dinh Nguyen <dinh.linux@...il.com>
>> Cc: David S. Miller <davem@...emloft.net>
>> ---
>> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 +++--------
>> .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 15 ++++++---------
>> include/linux/stmmac.h | 2 +-
>> 3 files changed, 10 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> index c21015b..87e4643 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> @@ -271,7 +271,6 @@ static void stmmac_eee_ctrl_timer(unsigned long arg)
>> */
>> bool stmmac_eee_init(struct stmmac_priv *priv)
>> {
>> - char *phy_bus_name = priv->plat->phy_bus_name;
>> unsigned long flags;
>> bool ret = false;
>>
>> @@ -283,7 +282,7 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
>> goto out;
>>
>> /* Never init EEE in case of a switch is attached */
>> - if (phy_bus_name && (!strcmp(phy_bus_name, "fixed")))
>> + if (priv->plat->is_fixed_link)
>> goto out;
>>
>> /* MAC core supports the EEE feature. */
>> @@ -820,12 +819,8 @@ static int stmmac_init_phy(struct net_device *dev)
>> phydev = of_phy_connect(dev, priv->plat->phy_node,
>> &stmmac_adjust_link, 0, interface);
>> } else {
>> - if (priv->plat->phy_bus_name)
>> - snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
>> - priv->plat->phy_bus_name, priv->plat->bus_id);
>> - else
>> - snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
>> - priv->plat->bus_id);
>> + snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
>> + priv->plat->bus_id);
>>
>> snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
>> priv->plat->phy_addr);
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> index 6a52fa1..09684dd 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> @@ -138,7 +138,12 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
>> return ERR_PTR(-ENODEV);
>>
>> plat->phy_node = of_node_get(np);
>> - }
>> + plat->is_fixed_link = true;
>> + } else
>> + plat->mdio_bus_data =
>> + devm_kzalloc(&pdev->dev,
>> + sizeof(struct stmmac_mdio_bus_data),
>> + GFP_KERNEL);
>>
>> /* "snps,phy-addr" is not a standard property. Mark it as deprecated
>> * and warn of its use. Remove this when phy node support is added.
>> @@ -146,14 +151,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
>> if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
>> dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
>>
>> - if ((plat->phy_node && !of_phy_is_fixed_link(np)) || plat->phy_bus_name)
>> - plat->mdio_bus_data = NULL;
>> - else
>> - plat->mdio_bus_data =
>> - devm_kzalloc(&pdev->dev,
>> - sizeof(struct stmmac_mdio_bus_data),
>> - GFP_KERNEL);
>> -
>> of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size);
>>
>> of_property_read_u32(np, "rx-fifo-depth", &plat->rx_fifo_size);
>> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
>> index eead8ab..1550558 100644
>> --- a/include/linux/stmmac.h
>> +++ b/include/linux/stmmac.h
>> @@ -94,10 +94,10 @@ struct stmmac_dma_cfg {
>> };
>>
>> struct plat_stmmacenet_data {
>> - char *phy_bus_name;
>> int bus_id;
>> int phy_addr;
>> int interface;
>> + bool is_fixed_link;
>> struct stmmac_mdio_bus_data *mdio_bus_data;
>> struct device_node *phy_node;
>> struct stmmac_dma_cfg *dma_cfg;
>> --
>> 1.7.4.4
>>
>
>
Powered by blists - more mailing lists