netdev - Re: am335x: no multicast reception over VLAN

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 31 Mar 2016 15:32:35 +0530
From:	Mugunthan V N <mugunthanvnm@...com>
To:	Yegor Yefremov <yegorslists@...glemail.com>
CC:	Peter Korsgaard <peter@...sgaard.com>,
	Grygorii Strashko <grygorii.strashko@...com>,
	netdev <netdev@...r.kernel.org>,
	"linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>,
	<drivshin@...worx.com>, <ml@...kusgrimm.de>
Subject: Re: am335x: no multicast reception over VLAN

On Thursday 31 March 2016 01:22 PM, Yegor Yefremov wrote:
> On Thu, Mar 31, 2016 at 8:37 AM, Mugunthan V N <mugunthanvnm@...com> wrote:
>> On Thursday 31 March 2016 01:17 AM, Peter Korsgaard wrote:
>>>>>>>> "Mugunthan" == Mugunthan V N <mugunthanvnm@...com> writes:
>>>
>>> Hi,
>>>
>>>  > You had received these packets as tcpdump will enable promiscuous mode
>>>  > so that you receive all the packets from the wire.
>>>
>>> FYI, you can use the -p option to tcpdump to not put the interface into
>>> promiscuous mode.
>>>
>>
>> Thanks for the information Peter Korsgaard.
>>
>> Yegor, can you provide tcpdump using -p as well in Grygorii commands.
> 
> Before VLAN configuration:
> 
> # switch-config -d
> cpsw hw version 1.12 (0)
> 0   : type: vlan , vid = 1, untag_force = 0x3, reg_mcast = 0x3,
> unreg_mcast = 0x0, member_list = 0x3
> 1   : type: mcast, vid = 1, addr = ff:ff:ff:ff:ff:ff, mcast_state = f,
> no super, port_mask = 0x3
> 2   : type: ucast, vid = 1, addr = 74:6a:8f:00:16:12, ucast_type =
> persistant, port_num = 0x0, Secure
> 3   : type: vlan , vid = 0, untag_force = 0x7, reg_mcast = 0x0,
> unreg_mcast = 0x0, member_list = 0x7
> 4   : type: mcast, vid = 1, addr = 01:00:5e:00:00:01, mcast_state = f,
> no super, port_mask = 0x3
> 5   : type: vlan , vid = 2, untag_force = 0x5, reg_mcast = 0x5,
> unreg_mcast = 0x0, member_list = 0x5
> 6   : type: mcast, vid = 2, addr = ff:ff:ff:ff:ff:ff, mcast_state = f,
> no super, port_mask = 0x5
> 7   : type: ucast, vid = 2, addr = 74:6a:8f:00:16:13, ucast_type =
> persistant, port_num = 0x0, Secure
> 8   : type: mcast, vid = 2, addr = 01:00:5e:00:00:01, mcast_state = f,
> no super, port_mask = 0x5
> 
> After VLAN configuration:
> 
> # switch-config -d
> cpsw hw version 1.12 (0)
> 0   : type: vlan , vid = 1, untag_force = 0x3, reg_mcast = 0x3,
> unreg_mcast = 0x0, member_list = 0x3
> 1   : type: mcast, vid = 1, addr = ff:ff:ff:ff:ff:ff, mcast_state = f,
> no super, port_mask = 0x3
> 2   : type: ucast, vid = 1, addr = 74:6a:8f:00:16:12, ucast_type =
> persistant, port_num = 0x0, Secure
> 3   : type: vlan , vid = 0, untag_force = 0x7, reg_mcast = 0x0,
> unreg_mcast = 0x0, member_list = 0x7
> 4   : type: mcast, vid = 1, addr = 01:00:5e:00:00:01, mcast_state = f,
> no super, port_mask = 0x3
> 5   : type: vlan , vid = 2, untag_force = 0x5, reg_mcast = 0x5,
> unreg_mcast = 0x0, member_list = 0x5
> 6   : type: mcast, vid = 2, addr = ff:ff:ff:ff:ff:ff, mcast_state = f,
> no super, port_mask = 0x5
> 7   : type: ucast, vid = 2, addr = 74:6a:8f:00:16:13, ucast_type =
> persistant, port_num = 0x0, Secure
> 8   : type: mcast, vid = 2, addr = 01:00:5e:00:00:01, mcast_state = f,
> no super, port_mask = 0x5
> 9   : type: vlan , vid = 100, untag_force = 0x0, reg_mcast = 0x5,
> unreg_mcast = 0x0, member_list = 0x5
> 10  : type: ucast, vid = 100, addr = 74:6a:8f:00:16:13, ucast_type =
> persistant, port_num = 0x0
> 11  : type: mcast, vid = 100, addr = ff:ff:ff:ff:ff:ff, mcast_state =
> f, no super, port_mask = 0x5
> 12  : type: mcast, vid = 2, addr = 01:80:c2:00:00:21, mcast_state = f,
> no super, port_mask = 0x5
> 
> During mulitcast receive:
> 
> # switch-config -d
> cpsw hw version 1.12 (0)
> 0   : type: vlan , vid = 1, untag_force = 0x3, reg_mcast = 0x3,
> unreg_mcast = 0x0, member_list = 0x3
> 1   : type: mcast, vid = 1, addr = ff:ff:ff:ff:ff:ff, mcast_state = f,
> no super, port_mask = 0x3
> 2   : type: ucast, vid = 1, addr = 74:6a:8f:00:16:12, ucast_type =
> persistant, port_num = 0x0, Secure
> 3   : type: vlan , vid = 0, untag_force = 0x7, reg_mcast = 0x0,
> unreg_mcast = 0x0, member_list = 0x7
> 4   : type: mcast, vid = 1, addr = 01:00:5e:00:00:01, mcast_state = f,
> no super, port_mask = 0x3
> 5   : type: vlan , vid = 2, untag_force = 0x5, reg_mcast = 0x5,
> unreg_mcast = 0x0, member_list = 0x5
> 6   : type: mcast, vid = 2, addr = ff:ff:ff:ff:ff:ff, mcast_state = f,
> no super, port_mask = 0x5
> 7   : type: ucast, vid = 2, addr = 74:6a:8f:00:16:13, ucast_type =
> persistant, port_num = 0x0, Secure
> 8   : type: mcast, vid = 2, addr = 01:00:5e:00:00:01, mcast_state = f,
> no super, port_mask = 0x5
> 9   : type: vlan , vid = 100, untag_force = 0x0, reg_mcast = 0x5,
> unreg_mcast = 0x0, member_list = 0x5
> 10  : type: ucast, vid = 100, addr = 74:6a:8f:00:16:13, ucast_type =
> persistant, port_num = 0x0
> 11  : type: mcast, vid = 100, addr = ff:ff:ff:ff:ff:ff, mcast_state =
> f, no super, port_mask = 0x5
> 12  : type: mcast, vid = 2, addr = 01:80:c2:00:00:21, mcast_state = f,
> no super, port_mask = 0x5
> 13  : type: mcast, vid = 2, addr = 01:00:5e:03:1d:47, mcast_state = f,
> no super, port_mask = 0x5
> 14  : type: ucast, vid = 100, addr = 66:22:04:bc:90:26, ucast_type =
> untouched , port_num = 0x2

I could see multicast address 01:00:5e:03:1d:47 is added to ALE table at
index 13, but it is added for VLAN id 2 ie eth1, did you ran the test
for eth1 or eth1.100?

Regards
Mugunthan V N