netdev - [net-next v2 05/14] ixgbe: Avoid adding VLAN 0 twice to VLVF and VFTA

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon,  4 Apr 2016 17:58:56 -0700
From:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:	davem@...emloft.net
Cc:	Alexander Duyck <aduyck@...antis.com>, netdev@...r.kernel.org,
	nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next v2 05/14] ixgbe: Avoid adding VLAN 0 twice to VLVF and VFTA

From: Alexander Duyck <aduyck@...antis.com>

We were adding VLAN 0 twice each time we restored the VLAN configuration.
Instead of doing it twice we can just start working through the active
VLANs from ID 1 on and skip the double write.

Signed-off-by: Alexander Duyck <aduyck@...antis.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index a01a7f2..297e7d3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -4172,11 +4172,11 @@ static void ixgbe_vlan_promisc_disable(struct ixgbe_adapter *adapter)
 
 static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter)
 {
-	u16 vid;
+	u16 vid = 1;
 
 	ixgbe_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), 0);
 
-	for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+	for_each_set_bit_from(vid, adapter->active_vlans, VLAN_N_VID)
 		ixgbe_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid);
 }
 
-- 
2.5.5