netdev - [RESEND PATCH v6 0/6] Add Ethernet support on STM32F429

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Mon,  9 May 2016 12:31:33 +0200
From:	Alexandre TORGUE <alexandre.torgue@...il.com>
To:	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	Giuseppe Cavallaro <peppe.cavallaro@...com>,
	netdev@...r.kernel.org, devicetree@...r.kernel.org
Cc:	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	robh@...nel.org, manabian@...il.com, wens@...e.org
Subject: [RESEND PATCH v6 0/6]  Add Ethernet support on STM32F429

STM32F429 Chip embeds a Synopsys 3.50a MAC IP.
This series:
 -enhance current stmmac driver to control it (code already
available) and adds basic glue for STM32F429 chip.
 -Enable basic Net config in kernel.

Changes since v5:
 -Fix typo in bindings documentation patch.
 -Change clocks names in stm32-dwmac glue driver / Documentation.
 -After rebase, stm32 ethernet node is now available. It has to be updated
according to new clocks names.

Changes since v4:
 -Fix dirty copy/past in bindings documentation patch.

Changes since v3:
 -Fix "tx-clk" and "rx-clk" as required clocks. Driver and bindings are
modified.

Changes since v2:
 -Fix alphabetic order in Kconfig and Makefile.
 -Improve code according to Joachim review.
 -Binding: remove useless entry.

Changes since v1:
 -Fix Kbuild issue in Kconfig.
 -Remove init/exit callbacks. Suspend/Resume and remove driver is no more
driven in stmmac_pltfr but directly in dwmac-stm32 glue driver.
 -Take into account Joachim review.

Regards.

Alexandre.

Alexandre TORGUE (6):
  net: ethernet: dwmac: add Ethernet glue logic for stm32 chip
  Documentation: Bindings: Add STM32 DWMAC glue
  net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP
  ARM: STM32: Enable Ethernet in stm32_defconfig
  ARM: dts: stm32f429: Align Ethernet node with new bindings properties
  ARM: dts: stm32f429: Update Ethernet node on Eval board

 .../devicetree/bindings/net/stm32-dwmac.txt        |  32 ++++
 arch/arm/boot/dts/stm32429i-eval.dts               |   4 +-
 arch/arm/boot/dts/stm32f429.dtsi                   |   6 +-
 arch/arm/configs/stm32_defconfig                   |   9 +
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |  12 ++
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c  | 193 +++++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |   1 +
 8 files changed, 253 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c

-- 
1.9.1