netdev - [patch net 1/9] mlxsw: spectrum: Don't return upon error in removal path

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 15 Aug 2016 16:37:45 +0200
From:	Jiri Pirko <jiri@...nulli.us>
To:	netdev@...r.kernel.org
Cc:	davem@...emloft.net, idosch@...lanox.com, eladr@...lanox.com,
	yotamg@...lanox.com, nogahf@...lanox.com, ogerlitz@...lanox.com
Subject: [patch net 1/9] mlxsw: spectrum: Don't return upon error in removal path

From: Ido Schimmel <idosch@...lanox.com>

When removing a VLAN filter from the device we shouldn't return upon the
first error we encounter, as otherwise we'll have resources that will
never be freed nor used.

Instead, we should keep trying to free as much resources as possible in
a best effort mode.

Remove the error message as well, since we already get these from the
EMAD transaction code.

Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: Ido Schimmel <idosch@...lanox.com>
Signed-off-by: Jiri Pirko <jiri@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 27 +++++---------------------
 1 file changed, 5 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index e1b8f62..76b53ed 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -1010,7 +1010,6 @@ static int mlxsw_sp_port_kill_vid(struct net_device *dev,
 	struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev);
 	struct mlxsw_sp_port *mlxsw_sp_vport;
 	struct mlxsw_sp_fid *f;
-	int err;
 
 	/* VLAN 0 is removed from HW filter when device goes down, but
 	 * it is reserved in our case, so simply return.
@@ -1019,23 +1018,12 @@ static int mlxsw_sp_port_kill_vid(struct net_device *dev,
 		return 0;
 
 	mlxsw_sp_vport = mlxsw_sp_port_vport_find(mlxsw_sp_port, vid);
-	if (!mlxsw_sp_vport) {
-		netdev_warn(dev, "VID=%d does not exist\n", vid);
+	if (WARN_ON(!mlxsw_sp_vport))
 		return 0;
-	}
 
-	err = mlxsw_sp_port_vlan_set(mlxsw_sp_vport, vid, vid, false, false);
-	if (err) {
-		netdev_err(dev, "Failed to set VLAN membership for VID=%d\n",
-			   vid);
-		return err;
-	}
+	mlxsw_sp_port_vlan_set(mlxsw_sp_vport, vid, vid, false, false);
 
-	err = mlxsw_sp_port_vid_learning_set(mlxsw_sp_vport, vid, true);
-	if (err) {
-		netdev_err(dev, "Failed to enable learning for VID=%d\n", vid);
-		return err;
-	}
+	mlxsw_sp_port_vid_learning_set(mlxsw_sp_vport, vid, true);
 
 	/* Drop FID reference. If this was the last reference the
 	 * resources will be freed.
@@ -1048,13 +1036,8 @@ static int mlxsw_sp_port_kill_vid(struct net_device *dev,
 	 * transition all active 802.1Q bridge VLANs to use VID to FID
 	 * mappings and set port's mode to VLAN mode.
 	 */
-	if (list_is_singular(&mlxsw_sp_port->vports_list)) {
-		err = mlxsw_sp_port_vlan_mode_trans(mlxsw_sp_port);
-		if (err) {
-			netdev_err(dev, "Failed to set to VLAN mode\n");
-			return err;
-		}
-	}
+	if (list_is_singular(&mlxsw_sp_port->vports_list))
+		mlxsw_sp_port_vlan_mode_trans(mlxsw_sp_port);
 
 	mlxsw_sp_port_vport_destroy(mlxsw_sp_vport);
 
-- 
2.5.5