[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 10 Oct 2016 16:53:09 +0200
From: Peter Rosin <peda@...ntia.se>
To: Pantelis Antoniou <pantelis.antoniou@...sulko.com>,
Lee Jones <lee.jones@...aro.org>
CC: Linus Walleij <linus.walleij@...aro.org>,
Alexandre Courbot <gnurou@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Frank Rowand <frowand.list@...il.com>,
Wolfram Sang <wsa@...-dreams.de>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
"Wim Van Sebroeck" <wim@...ana.be>,
Debjit Ghosh <dghosh@...iper.net>,
Georgi Vlaev <gvlaev@...iper.net>,
Guenter Roeck <linux@...ck-us.net>,
Maryam Seraj <mseraj@...iper.net>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-gpio@...r.kernel.org>, <linux-i2c@...r.kernel.org>,
<linux-mtd@...ts.infradead.org>, <linux-watchdog@...r.kernel.org>,
<netdev@...r.kernel.org>
Subject: Re: [PATCH 10/10] net: mdio-sam: Add device tree documentation for
SAM MDIO
On 2016-10-07 17:18, Pantelis Antoniou wrote:
> From: Georgi Vlaev <gvlaev@...iper.net>
>
> Add device tree bindings document for the SAM MDIO block
> present in Juniper's SAM FPGA.
>
> Signed-off-by: Georgi Vlaev <gvlaev@...iper.net>
> [Ported from Juniper kernel]
> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@...sulko.com>
> ---
> Documentation/devicetree/bindings/net/mdio-sam.txt | 48 ++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/mdio-sam.txt
>
> diff --git a/Documentation/devicetree/bindings/net/mdio-sam.txt b/Documentation/devicetree/bindings/net/mdio-sam.txt
> new file mode 100644
> index 0000000..7d354e0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/mdio-sam.txt
> @@ -0,0 +1,48 @@
> +Juniper SAM FPGA MFD MDIO bus properties.
> +
> +Required properties:
> +- compatible : "jnx,mdio-sam"
> +- reg : The start offset of the MDIO bus range
> +- #address-cells = <1>;
> +- #size-cells = <0>;
> +
> +Optional properties:
> +
> +Required properties for child nodes:
> +- #address-cells = <1>;
> +- #size-cells = <0>;
> +- reg : The MDIO bus offset within the MDIO range.
> +
> +
> +Example :
> +
> + sam@10 {
> + compatible = "jnx,sam";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + mdio-sam@10 {
This should be mdio-sam@...00, OR ...
> + compatible = "jnx,mdio-sam";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x40000>;
... this should be reg = <0x10>. AFAIK.
Cheers,
Peter
> +
> + mdio0: mdio-sam@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0>;
> + };
> +
> + mdio1: mdio-sam@...0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x4000>;
> + };
> +
> + mdio2: mdio-sam@...0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x8000>;
> + };
> + };
> + };
>
Powered by blists - more mailing lists