| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 30 Oct 2016 18:38:36 +0200
From: Yuval Mintz <Yuval.Mintz@...ium.com>
To: <davem@...emloft.net>, <netdev@...r.kernel.org>
CC: Yuval Mintz <Yuval.Mintz@...ium.com>
Subject: [PATCH net-next 6/7] qed: Use VF-queue feature
Driver sets several restrictions about the number of supported VFs
according to available HW/FW resources.
This creates a problem as there are constellations which can't be
supported [as limitation don't accurately describe the resources],
as well as holes where enabling IOV would fail due to supposed
lack of resources.
This introduces a new interal feature - vf-queues, which would
be used to lift some of the restriction and accurately enumerate
the queues that can be used by a given PF's VFs.
Signed-off-by: Yuval Mintz <Yuval.Mintz@...ium.com>
---
drivers/net/ethernet/qlogic/qed/qed.h | 1 +
drivers/net/ethernet/qlogic/qed/qed_dev.c | 20 ++++++++++++++----
drivers/net/ethernet/qlogic/qed/qed_int.c | 32 ++++++++++++++++++++++++++++-
drivers/net/ethernet/qlogic/qed/qed_sriov.c | 17 ++++++---------
4 files changed, 54 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed.h b/drivers/net/ethernet/qlogic/qed/qed.h
index 8828ffa..6d3013f 100644
--- a/drivers/net/ethernet/qlogic/qed/qed.h
+++ b/drivers/net/ethernet/qlogic/qed/qed.h
@@ -174,6 +174,7 @@ enum QED_FEATURE {
QED_PF_L2_QUE,
QED_VF,
QED_RDMA_CNQ,
+ QED_VF_L2_QUE,
QED_MAX_FEATURES,
};
diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index 13833a5..b59da1a 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -1475,6 +1475,7 @@ static void get_function_id(struct qed_hwfn *p_hwfn)
static void qed_hw_set_feat(struct qed_hwfn *p_hwfn)
{
u32 *feat_num = p_hwfn->hw_info.feat_num;
+ struct qed_sb_cnt_info sb_cnt_info;
int num_features = 1;
#if IS_ENABLED(CONFIG_INFINIBAND_QEDR)
@@ -1493,10 +1494,21 @@ static void qed_hw_set_feat(struct qed_hwfn *p_hwfn)
feat_num[QED_PF_L2_QUE] = min_t(u32, RESC_NUM(p_hwfn, QED_SB) /
num_features,
RESC_NUM(p_hwfn, QED_L2_QUEUE));
- DP_VERBOSE(p_hwfn, NETIF_MSG_PROBE,
- "#PF_L2_QUEUES=%d #SBS=%d num_features=%d\n",
- feat_num[QED_PF_L2_QUE], RESC_NUM(p_hwfn, QED_SB),
- num_features);
+
+ memset(&sb_cnt_info, 0, sizeof(sb_cnt_info));
+ qed_int_get_num_sbs(p_hwfn, &sb_cnt_info);
+ feat_num[QED_VF_L2_QUE] =
+ min_t(u32,
+ RESC_NUM(p_hwfn, QED_L2_QUEUE) -
+ FEAT_NUM(p_hwfn, QED_PF_L2_QUE), sb_cnt_info.sb_iov_cnt);
+
+ DP_VERBOSE(p_hwfn,
+ NETIF_MSG_PROBE,
+ "#PF_L2_QUEUES=%d VF_L2_QUEUES=%d #ROCE_CNQ=%d #SBS=%d num_features=%d\n",
+ (int)FEAT_NUM(p_hwfn, QED_PF_L2_QUE),
+ (int)FEAT_NUM(p_hwfn, QED_VF_L2_QUE),
+ (int)FEAT_NUM(p_hwfn, QED_RDMA_CNQ),
+ RESC_NUM(p_hwfn, QED_SB), num_features);
}
static int qed_hw_get_resc(struct qed_hwfn *p_hwfn)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c
index 2adedc6..bb74e1c 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.c
@@ -3030,6 +3030,31 @@ int qed_int_igu_read_cam(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
}
}
}
+
+ /* There's a possibility the igu_sb_cnt_iov doesn't properly reflect
+ * the number of VF SBs [especially for first VF on engine, as we can't
+ * diffrentiate between empty entries and its entries].
+ * Since we don't really support more SBs than VFs today, prevent any
+ * such configuration by sanitizing the number of SBs to equal the
+ * number of VFs.
+ */
+ if (IS_PF_SRIOV(p_hwfn)) {
+ u16 total_vfs = p_hwfn->cdev->p_iov_info->total_vfs;
+
+ if (total_vfs < p_igu_info->free_blks) {
+ DP_VERBOSE(p_hwfn,
+ (NETIF_MSG_INTR | QED_MSG_IOV),
+ "Limiting number of SBs for IOV - %04x --> %04x\n",
+ p_igu_info->free_blks,
+ p_hwfn->cdev->p_iov_info->total_vfs);
+ p_igu_info->free_blks = total_vfs;
+ } else if (total_vfs > p_igu_info->free_blks) {
+ DP_NOTICE(p_hwfn,
+ "IGU has only %04x SBs for VFs while the device has %04x VFs\n",
+ p_igu_info->free_blks, total_vfs);
+ return -EINVAL;
+ }
+ }
p_igu_info->igu_sb_cnt_iov = p_igu_info->free_blks;
DP_VERBOSE(
@@ -3163,7 +3188,12 @@ u16 qed_int_queue_id_from_sb_id(struct qed_hwfn *p_hwfn, u16 sb_id)
return sb_id - p_info->igu_base_sb;
} else if ((sb_id >= p_info->igu_base_sb_iov) &&
(sb_id < p_info->igu_base_sb_iov + p_info->igu_sb_cnt_iov)) {
- return sb_id - p_info->igu_base_sb_iov + p_info->igu_sb_cnt;
+ /* We want the first VF queue to be adjacent to the
+ * last PF queue. Since L2 queues can be partial to
+ * SBs, we'll use the feature instead.
+ */
+ return sb_id - p_info->igu_base_sb_iov +
+ FEAT_NUM(p_hwfn, QED_PF_L2_QUE);
} else {
DP_NOTICE(p_hwfn, "SB %d not in range for function\n", sb_id);
return 0;
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index 6f029f9..f3f742a 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -3470,7 +3470,6 @@ int qed_sriov_disable(struct qed_dev *cdev, bool pci_enabled)
static int qed_sriov_enable(struct qed_dev *cdev, int num)
{
- struct qed_sb_cnt_info sb_cnt_info;
int i, j, rc;
if (num >= RESC_NUM(&cdev->hwfns[0], QED_VPORT)) {
@@ -3483,7 +3482,11 @@ static int qed_sriov_enable(struct qed_dev *cdev, int num)
for_each_hwfn(cdev, j) {
struct qed_hwfn *hwfn = &cdev->hwfns[j];
struct qed_ptt *ptt = qed_ptt_acquire(hwfn);
- int num_sbs = 0, limit = 16;
+ int num_queues;
+
+ /* Make sure not to use more than 16 queues per VF */
+ num_queues = min_t(int,
+ FEAT_NUM(hwfn, QED_VF_L2_QUE) / num, 16);
if (!ptt) {
DP_ERR(hwfn, "Failed to acquire ptt\n");
@@ -3491,19 +3494,11 @@ static int qed_sriov_enable(struct qed_dev *cdev, int num)
goto err;
}
- if (IS_MF_DEFAULT(hwfn))
- limit = MAX_NUM_VFS_BB / hwfn->num_funcs_on_engine;
-
- memset(&sb_cnt_info, 0, sizeof(sb_cnt_info));
- qed_int_get_num_sbs(hwfn, &sb_cnt_info);
- num_sbs = min_t(int, sb_cnt_info.sb_free_blk, limit);
-
for (i = 0; i < num; i++) {
if (!qed_iov_is_valid_vfid(hwfn, i, false, true))
continue;
- rc = qed_iov_init_hw_for_vf(hwfn,
- ptt, i, num_sbs / num);
+ rc = qed_iov_init_hw_for_vf(hwfn, ptt, i, num_queues);
if (rc) {
DP_ERR(cdev, "Failed to enable VF[%d]\n", i);
qed_ptt_release(hwfn, ptt);
--
1.9.3
Powered by blists - more mailing lists