netdev - Re: [PATCH v6 7/7] arm64: dts: NS2: add AMAC ethernet support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 4 Nov 2016 16:31:40 +0300
From:   Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To:     Jon Mason <jon.mason@...adcom.com>,
        David Miller <davem@...emloft.net>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Florian Fainelli <f.fainelli@...il.com>
Cc:     rafal@...ecki.pl, bcm-kernel-feedback-list@...adcom.com,
        netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6 7/7] arm64: dts: NS2: add AMAC ethernet support

Hello.

On 11/4/2016 8:11 AM, Jon Mason wrote:

> Add support for the AMAC ethernet to the Broadcom Northstar2 SoC device
> tree
>
> Signed-off-by: Jon Mason <jon.mason@...adcom.com>
> ---
>  arch/arm64/boot/dts/broadcom/ns2-svk.dts |  5 +++++
>  arch/arm64/boot/dts/broadcom/ns2.dtsi    | 12 ++++++++++++
>  2 files changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
> index b09f3bc..c4d5442 100644
> --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
> +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
> @@ -56,6 +56,10 @@
>  	};
>  };
>
> +&enet {
> +	status = "ok";

    The spec dictates it should be "okay" (although "ok" is also recognized).

> +};
> +
>  &pci_phy0 {
>  	status = "ok";
>  };
> @@ -174,6 +178,7 @@
>  &mdio_mux_iproc {
>  	mdio@10 {
>  		gphy0: eth-phy@10 {
> +			enet-phy-lane-swap;
>  			reg = <0x10>;
>  		};
>  	};
[...]

MBR, Sergei