| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 14 Nov 2016 10:29:20 +0100
From: "Allan W. Nielsen" <allan.nielsen@...rosemi.com>
To: <netdev@...r.kernel.org>
CC: <andrew@...n.ch>, <raju.lakkaraju@...rosemi.com>,
<allan.nielsen@...rosemi.com>,
Raju Lakkaraju <Raju.Lakkaraju@...rosemi.com>
Subject: [PATCH net-next v2 5/5] net: phy: Add downshift get/set support in Microsemi PHYs driver
From: Raju Lakkaraju <Raju.Lakkaraju@...rosemi.com>
Implements the phy tunable function pointers and implement downshift
functionality for MSCC PHYs.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@...rosemi.com>
---
drivers/net/phy/mscc.c | 100 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 100 insertions(+)
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index d0026ab..92018ba 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -46,8 +46,15 @@ enum rgmii_rx_clock_delay {
#define MSCC_EXT_PAGE_ACCESS 31
#define MSCC_PHY_PAGE_STANDARD 0x0000 /* Standard registers */
+#define MSCC_PHY_PAGE_EXTENDED 0x0001 /* Extended registers */
#define MSCC_PHY_PAGE_EXTENDED_2 0x0002 /* Extended reg - page 2 */
+/* Extended Page 1 Registers */
+#define MSCC_PHY_ACTIPHY_CNTL 20
+#define DOWNSHIFT_CNTL_MASK 0x001C
+#define DOWNSHIFT_EN 0x0010
+#define DOWNSHIFT_CNTL_POS 2
+
/* Extended Page 2 Registers */
#define MSCC_PHY_RGMII_CNTL 20
#define RGMII_RX_CLK_DELAY_MASK 0x0070
@@ -75,6 +82,8 @@ enum rgmii_rx_clock_delay {
#define MSCC_VDDMAC_2500 2500
#define MSCC_VDDMAC_3300 3300
+#define DOWNSHIFT_COUNT_MAX 5
+
struct vsc8531_private {
int rate_magic;
};
@@ -101,6 +110,66 @@ static int vsc85xx_phy_page_set(struct phy_device *phydev, u8 page)
return rc;
}
+static int vsc85xx_downshift_get(struct phy_device *phydev, u8 *count)
+{
+ int rc;
+ u16 reg_val;
+
+ mutex_lock(&phydev->lock);
+ rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_EXTENDED);
+ if (rc != 0)
+ goto out_unlock;
+
+ reg_val = phy_read(phydev, MSCC_PHY_ACTIPHY_CNTL);
+ reg_val &= DOWNSHIFT_CNTL_MASK;
+ if (!(reg_val & DOWNSHIFT_EN))
+ *count = DOWNSHIFT_DEV_DISABLE;
+ else
+ *count = ((reg_val & ~DOWNSHIFT_EN) >> DOWNSHIFT_CNTL_POS) + 2;
+ rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_STANDARD);
+
+out_unlock:
+ mutex_unlock(&phydev->lock);
+
+ return rc;
+}
+
+static int vsc85xx_downshift_set(struct phy_device *phydev, u8 count)
+{
+ int rc;
+ u16 reg_val;
+
+ if (count == DOWNSHIFT_DEV_DEFAULT_COUNT) {
+ /* Default downshift count 3 (i.e. Bit3:2 = 0b01) */
+ count = ((1 << DOWNSHIFT_CNTL_POS) | DOWNSHIFT_EN);
+ } else if (count > DOWNSHIFT_COUNT_MAX || count == 1) {
+ phydev_err(phydev, "Downshift count should be 2,3,4 or 5\n");
+ return -ERANGE;
+ } else if (count) {
+ /* Downshift count is either 2,3,4 or 5 */
+ count = (((count - 2) << DOWNSHIFT_CNTL_POS) | DOWNSHIFT_EN);
+ }
+
+ mutex_lock(&phydev->lock);
+ rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_EXTENDED);
+ if (rc != 0)
+ goto out_unlock;
+
+ reg_val = phy_read(phydev, MSCC_PHY_ACTIPHY_CNTL);
+ reg_val &= ~(DOWNSHIFT_CNTL_MASK);
+ reg_val |= count;
+ rc = phy_write(phydev, MSCC_PHY_ACTIPHY_CNTL, reg_val);
+ if (rc != 0)
+ goto out_unlock;
+
+ rc = vsc85xx_phy_page_set(phydev, MSCC_PHY_PAGE_STANDARD);
+
+out_unlock:
+ mutex_unlock(&phydev->lock);
+
+ return rc;
+}
+
static int vsc85xx_wol_set(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
@@ -329,6 +398,29 @@ static int vsc85xx_default_config(struct phy_device *phydev)
return rc;
}
+static int vsc85xx_get_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return vsc85xx_downshift_get(phydev, (u8 *)data);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int vsc85xx_set_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna,
+ const void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return vsc85xx_downshift_set(phydev, *(u8 *)data);
+ default:
+ return -EINVAL;
+ }
+}
+
static int vsc85xx_config_init(struct phy_device *phydev)
{
int rc;
@@ -418,6 +510,8 @@ static struct phy_driver vsc85xx_driver[] = {
.probe = &vsc85xx_probe,
.set_wol = &vsc85xx_wol_set,
.get_wol = &vsc85xx_wol_get,
+ .get_tunable = &vsc85xx_get_tunable,
+ .set_tunable = &vsc85xx_set_tunable,
},
{
.phy_id = PHY_ID_VSC8531,
@@ -437,6 +531,8 @@ static struct phy_driver vsc85xx_driver[] = {
.probe = &vsc85xx_probe,
.set_wol = &vsc85xx_wol_set,
.get_wol = &vsc85xx_wol_get,
+ .get_tunable = &vsc85xx_get_tunable,
+ .set_tunable = &vsc85xx_set_tunable,
},
{
.phy_id = PHY_ID_VSC8540,
@@ -456,6 +552,8 @@ static struct phy_driver vsc85xx_driver[] = {
.probe = &vsc85xx_probe,
.set_wol = &vsc85xx_wol_set,
.get_wol = &vsc85xx_wol_get,
+ .get_tunable = &vsc85xx_get_tunable,
+ .set_tunable = &vsc85xx_set_tunable,
},
{
.phy_id = PHY_ID_VSC8541,
@@ -475,6 +573,8 @@ static struct phy_driver vsc85xx_driver[] = {
.probe = &vsc85xx_probe,
.set_wol = &vsc85xx_wol_set,
.get_wol = &vsc85xx_wol_get,
+ .get_tunable = &vsc85xx_get_tunable,
+ .set_tunable = &vsc85xx_set_tunable,
}
};
--
2.7.3
Powered by blists - more mailing lists