netdev - [PATCH net 10/12] net/mlx5e: Check ets capability before initializing ets settings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 28 Dec 2016 14:58:40 +0200
From:   Saeed Mahameed <saeedm@...lanox.com>
To:     "David S. Miller" <davem@...emloft.net>
Cc:     netdev@...r.kernel.org, Huy Nguyen <huyn@...lanox.com>,
        Saeed Mahameed <saeedm@...lanox.com>
Subject: [PATCH net 10/12] net/mlx5e: Check ets capability before initializing ets settings

From: Huy Nguyen <huyn@...lanox.com>

During the initial setup, the ets command is sent to firmware
without checking if the HCA supports ets. This causes the invalid
command error. Add the ets capiblity check before sending firmware
command to initialize ets settings.

Fixes: e207b7e99176 ("net/mlx5e: ConnectX-4 firmware support for DCBX")
Signed-off-by: Huy Nguyen <huyn@...lanox.com>
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
index 7f6c225..f0b460f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
@@ -723,6 +723,9 @@ static void mlx5e_ets_init(struct mlx5e_priv *priv)
 	int i;
 	struct ieee_ets ets;
 
+	if (!MLX5_CAP_GEN(priv->mdev, ets))
+		return;
+
 	memset(&ets, 0, sizeof(ets));
 	ets.ets_cap = mlx5_max_tc(priv->mdev) + 1;
 	for (i = 0; i < ets.ets_cap; i++) {
-- 
2.7.4