netdev - Re: [PATCH v5 0/2] Add support for the ethernet switch on the ESPRESSObin

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 20 Jan 2017 23:38:23 +0100
From:   Andrew Lunn <andrew@...n.ch>
To:     Gregory CLEMENT <gregory.clement@...e-electrons.com>
Cc:     Vivien Didelot <vivien.didelot@...oirfairelinux.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        "David S. Miller" <davem@...emloft.net>,
        Jason Cooper <jason@...edaemon.net>,
        Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
        Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
        linux-arm-kernel@...ts.infradead.org,
        Nadav Haklai <nadavh@...vell.com>,
        Wilson Ding <dingwei@...vell.com>,
        Kostya Porotchkin <kostap@...vell.com>,
        Joe Zhou <shjzhou@...vell.com>,
        Jon Pannell <jpannell@...vell.com>
Subject: Re: [PATCH v5 0/2] Add support for the ethernet switch on the
 ESPRESSObin

> Actually I didn't find anything related to the temperature measurement
> in the datasheet I have. For the 6390 there is a dedicated datsheet for
> the PHY part for the 6352 it is part of the same datasheet.

Hi Gregory

The temperature sensor changes have landed in net-next. If you have
time, please rebase to it and do some tests. Here are the likely
outcomes:

1) Like the 6390, it does not have a valid PHY product ID. Hence the
Marvell PHY driver is not loaded. You can see the PHY ID in

/sys/bus/mdio_bus/devices/*/phy_id

If it is 0x01410000, there is no product ID. I have a workaround for
this.

2) It has a valid phy_id, but it is not known to the marvell driver.
Add an entry to the table at the bottom of drivers/net/phy/marvell.c,
and a new entry in marvell_drivers. I would copy the 1540.

3) The Marvell PHY driver does recognise it, and makes the temperature
available in /sys/class/hwmon/hwmon*/temp1_input. It always returns
-25000mC. Same problem i have with the 6390. No idea how to fix it yet.

4) The Marvell PHY driver does recognise it, and makes the temperature
available in /sys/class/hwmon/hwmon*/temp1_input. The value is O.K. It
all works :-)

Personally, i'm not betting on 4 :-)

    Andrew