| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 31 Jan 2017 10:11:38 +0100
From: Corentin Labbe <clabbe.montjoie@...il.com>
To: peppe.cavallaro@...com, alexandre.torgue@...com,
netdev@...r.kernel.org
Cc: davem@...emloft.net, linux-kernel@...r.kernel.org,
Corentin Labbe <clabbe.montjoie@...il.com>
Subject: [PATCH 03/17] net: stmmac: fix some typos in comments
This patch fix some typos in comments.
Signed-off-by: Corentin Labbe <clabbe.montjoie@...il.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c | 6 +++---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 16 ++++++++--------
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +-
3 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
index a414bde..3b1570d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
@@ -102,7 +102,7 @@ static void show_tx_process_state(unsigned int status)
pr_debug("- TX (Stopped): Reset or Stop command\n");
break;
case 1:
- pr_debug("- TX (Running):Fetching the Tx desc\n");
+ pr_debug("- TX (Running): Fetching the Tx desc\n");
break;
case 2:
pr_debug("- TX (Running): Waiting for end of tx\n");
@@ -136,7 +136,7 @@ static void show_rx_process_state(unsigned int status)
pr_debug("- RX (Running): Fetching the Rx desc\n");
break;
case 2:
- pr_debug("- RX (Running):Checking for end of pkt\n");
+ pr_debug("- RX (Running): Checking for end of pkt\n");
break;
case 3:
pr_debug("- RX (Running): Waiting for Rx pkt\n");
@@ -246,7 +246,7 @@ void stmmac_set_mac_addr(void __iomem *ioaddr, u8 addr[6],
unsigned long data;
data = (addr[5] << 8) | addr[4];
- /* For MAC Addr registers se have to set the Address Enable (AE)
+ /* For MAC Addr registers we have to set the Address Enable (AE)
* bit that has no effect on the High Reg 0 where the bit 31 (MO)
* is RO.
*/
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index bf2d8e6..ee71c07 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -216,7 +216,7 @@ static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv)
/**
* stmmac_hw_fix_mac_speed - callback for speed selection
* @priv: driver private structure
- * Description: on some platforms (e.g. ST), some HW system configuraton
+ * Description: on some platforms (e.g. ST), some HW system configuration
* registers have to be set according to the link speed negotiated.
*/
static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
@@ -415,7 +415,7 @@ static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p,
/**
* stmmac_hwtstamp_ioctl - control hardware timestamping.
* @dev: device pointer.
- * @ifr: An IOCTL specefic structure, that can contain a pointer to
+ * @ifr: An IOCTL specific structure, that can contain a pointer to
* a proprietary structure used to pass information to the driver.
* Description:
* This function configures the MAC to enable/disable both outgoing(TX)
@@ -1014,7 +1014,7 @@ static void stmmac_free_rx_buffers(struct stmmac_priv *priv, int i)
* @dev: net device structure
* @flags: gfp flag.
* Description: this function initializes the DMA RX/TX descriptors
- * and allocates the socket buffers. It suppors the chained and ring
+ * and allocates the socket buffers. It supports the chained and ring
* modes.
*/
static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
@@ -2515,7 +2515,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit)
if (unlikely(status == discard_frame)) {
priv->dev->stats.rx_errors++;
if (priv->hwts_rx_en && !priv->extend_desc) {
- /* DESC2 & DESC3 will be overwitten by device
+ /* DESC2 & DESC3 will be overwritten by device
* with timestamp value, hence reinitialize
* them in stmmac_rx_refill() function so that
* device can reuse it.
@@ -2538,7 +2538,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit)
frame_len = priv->hw->desc->get_rx_frame_len(p, coe);
- /* If frame length is greather than skb buffer size
+ /* If frame length is greater than skb buffer size
* (preallocated during init) then the packet is
* ignored
*/
@@ -2744,7 +2744,7 @@ static netdev_features_t stmmac_fix_features(struct net_device *dev,
/* Some GMAC devices have a bugged Jumbo frame support that
* needs to have the Tx COE disabled for oversized frames
* (due to limited buffer sizes). In this case we disable
- * the TX csum insertionin the TDES and not use SF.
+ * the TX csum insertion in the TDES and not use SF.
*/
if (priv->plat->bugged_jumbo && (dev->mtu > ETH_DATA_LEN))
features &= ~NETIF_F_CSUM_MASK;
@@ -2971,7 +2971,7 @@ static int stmmac_sysfs_dma_cap_read(struct seq_file *seq, void *v)
(priv->dma_cap.hash_filter) ? "Y" : "N");
seq_printf(seq, "\tMultiple MAC address registers: %s\n",
(priv->dma_cap.multi_addr) ? "Y" : "N");
- seq_printf(seq, "\tPCS (TBI/SGMII/RTBI PHY interfatces): %s\n",
+ seq_printf(seq, "\tPCS (TBI/SGMII/RTBI PHY interfaces): %s\n",
(priv->dma_cap.pcs) ? "Y" : "N");
seq_printf(seq, "\tSMA (MDIO) Interface: %s\n",
(priv->dma_cap.sma_mdio) ? "Y" : "N");
@@ -3508,7 +3508,7 @@ int stmmac_resume(struct device *dev)
priv->irq_wake = 0;
} else {
pinctrl_pm_select_default_state(priv->device);
- /* enable the clk prevously disabled */
+ /* enable the clk previously disabled */
clk_enable(priv->stmmac_clk);
clk_enable(priv->pclk);
/* reset the phy so that it's ready */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index b0344c2..a1a469e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -198,7 +198,7 @@ int stmmac_mdio_reset(struct mii_bus *bus)
/* This is a workaround for problems with the STE101P PHY.
* It doesn't complete its reset until at least one clock cycle
- * on MDC, so perform a dummy mdio read. To be upadted for GMAC4
+ * on MDC, so perform a dummy mdio read. To be updated for GMAC4
* if needed.
*/
if (!priv->plat->has_gmac4)
--
2.10.2
Powered by blists - more mailing lists