netdev - Re: [v5,net-next,1/9] net: stmmac: multiple queues dt configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 21 Mar 2017 13:10:07 +0100
From:   Thierry Reding <thierry.reding@...il.com>
To:     Joao Pinto <Joao.Pinto@...opsys.com>
Cc:     davem@...emloft.net, peppe.cavallaro@...com,
        alexandre.torgue@...com, niklas.cassel@...s.com,
        netdev@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [v5,net-next,1/9] net: stmmac: multiple queues dt configuration

On Tue, Mar 21, 2017 at 11:39:24AM +0000, Joao Pinto wrote:
> 
> Hi Thierry,
> 
> Às 11:32 AM de 3/21/2017, Thierry Reding escreveu:
> > On Fri, Mar 10, 2017 at 06:24:51PM +0000, Joao Pinto wrote:
> >> This patch adds the multiple queues configuration in the Device Tree.
> >> It was also created a set of structures to keep the RX and TX queues
> >> configurations to be used in the driver.
> >>
> >> Signed-off-by: Joao Pinto <jpinto@...opsys.com>
> >> ---
> >> Changes v4->v5:
> >> - patch title update (stmicro replaced by stmmac)
> >> Changes v2->v4:
> >> - Just to keep up with patch-set version
> >> Changes v1->v2:
> >> - RX and TX queues child nodes had bad handle
> >>
> >>  Documentation/devicetree/bindings/net/stmmac.txt   | 40 ++++++++++
> >>  .../net/ethernet/stmicro/stmmac/stmmac_platform.c  | 91 ++++++++++++++++++++++
> >>  include/linux/stmmac.h                             | 30 +++++++
> >>  3 files changed, 161 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
> >> index d3bfc2b..4107e67 100644
> >> --- a/Documentation/devicetree/bindings/net/stmmac.txt
> >> +++ b/Documentation/devicetree/bindings/net/stmmac.txt
> >> @@ -72,6 +72,27 @@ Optional properties:
> >>  	- snps,mb: mixed-burst
> >>  	- snps,rb: rebuild INCRx Burst
> >>  - mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
> >> +- Multiple RX Queues parameters: below the list of all the parameters to
> >> +				 configure the multiple RX queues:
> >> +	- snps,rx-queues-to-use: number of RX queues to be used in the driver
> >> +	- Choose one of these RX scheduling algorithms:
> >> +		- snps,rx-sched-sp: Strict priority
> >> +		- snps,rx-sched-wsp: Weighted Strict priority
> >> +	- For each RX queue
> >> +		- Choose one of these modes:
> >> +			- snps,dcb-algorithm: Queue to be enabled as DCB
> >> +			- snps,avb-algorithm: Queue to be enabled as AVB
> >> +		- snps,map-to-dma-channel: Channel to map
> >> +- Multiple TX Queues parameters: below the list of all the parameters to
> >> +				 configure the multiple TX queues:
> >> +	- snps,tx-queues-to-use: number of TX queues to be used in the driver
> >> +	- Choose one of these TX scheduling algorithms:
> >> +		- snps,tx-sched-wrr: Weighted Round Robin
> >> +		- snps,tx-sched-wfq: Weighted Fair Queuing
> >> +		- snps,tx-sched-dwrr: Deficit Weighted Round Robin
> >> +		- snps,tx-sched-sp: Strict priority
> >> +	- For each TX queue
> >> +		- snps,weight: TX queue weight (if using a weighted algorithm)
> >>  
> >>  Examples:
> >>  
> >> @@ -81,6 +102,23 @@ Examples:
> >>  		snps,blen = <256 128 64 32 0 0 0>;
> >>  	};
> >>  
> >> +	mtl_rx_setup: rx-queues-config {
> >> +		snps,rx-queues-to-use = <1>;
> >> +		snps,rx-sched-sp;
> >> +		queue0 {
> >> +			snps,dcb-algorithm;
> >> +			snps,map-to-dma-channel = <0x0>;
> >> +		};
> >> +	};
> >> +
> >> +	mtl_tx_setup: tx-queues-config {
> >> +		snps,tx-queues-to-use = <1>;
> >> +		snps,tx-sched-wrr;
> >> +		queue0 {
> >> +			snps,weight = <0x10>;
> >> +		};
> >> +	};
> >> +
> >>  	gmac0: ethernet@...00000 {
> >>  		compatible = "st,spear600-gmac";
> >>  		reg = <0xe0800000 0x8000>;
> >> @@ -104,4 +142,6 @@ Examples:
> >>  			phy1: ethernet-phy@0 {
> >>  			};
> >>  		};
> >> +		snps,mtl-rx-config = <&mtl_rx_setup>;
> >> +		snps,mtl-tx-config = <&mtl_tx_setup>;
> >>  	};
> > 
> > That's kind of an odd placement for these nodes. Wouldn't they be better
> > located within the controller's device tree node, rather than referenced
> > by phandle? Making them children of the root node leaves them completely
> > without context.
> > 
> > Thierry
> > 
> 
> I followed the same approach as "stmmac_axi_setup":
> https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git/tree/Documentation/devicetree/bindings/net/stmmac.txt
> 
> I personally find it cleaner and easier to read.

Okay, I see. I've never really seen this done, and I suspect the device
tree maintainers would've objected to the AXI bindings, but looks like
it fell through the cracks. Given that this has been upstream for a very
long time now, it is what it is, and I suppose this is at least
consistent.

Thierry

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)