netdev - [PATCH] of_mdio: Fix broken PHY IRQ in case of probe deferral

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 18 May 2017 14:59:05 +0200
From:   Geert Uytterhoeven <geert+renesas@...der.be>
To:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Frank Rowand <frowand.list@...il.com>
Cc:     Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
        Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
        netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-renesas-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
        Geert Uytterhoeven <geert+renesas@...der.be>
Subject: [PATCH] of_mdio: Fix broken PHY IRQ in case of probe deferral

If an Ethernet PHY is initialized before the interrupt controller it is
connected to, a message like the following is printed:

    irq: no irq domain found for /interrupt-controller@...c0000 !

However, the actual error is ignored, leading to a non-functional (-1)
PHY interrupt later:

    Micrel KSZ8041RNLI ee700000.ethernet-ffffffff:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.ethernet-ffffffff:01, irq=-1)

Depending on whether the PHY driver will fall back to polling, Ethernet
may or may not work.

To fix this:
  1. Switch of_mdiobus_register_phy() from irq_of_parse_and_map() to
     of_irq_get().
     Unlike the former, the latter returns -EPROBE_DEFER if the
     interrupt controller is not yet available, so this condition can be
     detected.
     Other errors are handled the same as before, i.e. use the passed
     mdio->irq[addr] as interrupt.
  2. Propagate and handle errors from of_mdiobus_register_phy() and
     of_mdiobus_register_device().

Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
---
Seen on r8a7791/koelsch when using the new CPG/MSSR clock driver.
I assume it always happened on RZ/G1 in mainline.
---
 drivers/of/of_mdio.c | 39 +++++++++++++++++++++++++++------------
 1 file changed, 27 insertions(+), 12 deletions(-)

diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 7e4c80f9b6cda0d3..f9ac2893f56184be 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -44,7 +44,7 @@ static int of_get_phy_id(struct device_node *device, u32 *phy_id)
 	return -EINVAL;
 }
 
-static void of_mdiobus_register_phy(struct mii_bus *mdio,
+static int of_mdiobus_register_phy(struct mii_bus *mdio,
 				    struct device_node *child, u32 addr)
 {
 	struct phy_device *phy;
@@ -60,9 +60,13 @@ static void of_mdiobus_register_phy(struct mii_bus *mdio,
 	else
 		phy = get_phy_device(mdio, addr, is_c45);
 	if (IS_ERR(phy))
-		return;
+		return PTR_ERR(phy);
 
-	rc = irq_of_parse_and_map(child, 0);
+	rc = of_irq_get(child, 0);
+	if (rc == -EPROBE_DEFER) {
+		phy_device_free(phy);
+		return rc;
+	}
 	if (rc > 0) {
 		phy->irq = rc;
 		mdio->irq[addr] = rc;
@@ -84,22 +88,23 @@ static void of_mdiobus_register_phy(struct mii_bus *mdio,
 	if (rc) {
 		phy_device_free(phy);
 		of_node_put(child);
-		return;
+		return rc;
 	}
 
 	dev_dbg(&mdio->dev, "registered phy %s at address %i\n",
 		child->name, addr);
+	return 0;
 }
 
-static void of_mdiobus_register_device(struct mii_bus *mdio,
-				       struct device_node *child, u32 addr)
+static int of_mdiobus_register_device(struct mii_bus *mdio,
+				      struct device_node *child, u32 addr)
 {
 	struct mdio_device *mdiodev;
 	int rc;
 
 	mdiodev = mdio_device_create(mdio, addr);
 	if (IS_ERR(mdiodev))
-		return;
+		return PTR_ERR(mdiodev);
 
 	/* Associate the OF node with the device structure so it
 	 * can be looked up later.
@@ -112,11 +117,12 @@ static void of_mdiobus_register_device(struct mii_bus *mdio,
 	if (rc) {
 		mdio_device_free(mdiodev);
 		of_node_put(child);
-		return;
+		return rc;
 	}
 
 	dev_dbg(&mdio->dev, "registered mdio device %s at address %i\n",
 		child->name, addr);
+	return 0;
 }
 
 int of_mdio_parse_addr(struct device *dev, const struct device_node *np)
@@ -242,9 +248,11 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 		}
 
 		if (of_mdiobus_child_is_phy(child))
-			of_mdiobus_register_phy(mdio, child, addr);
+			rc = of_mdiobus_register_phy(mdio, child, addr);
 		else
-			of_mdiobus_register_device(mdio, child, addr);
+			rc = of_mdiobus_register_device(mdio, child, addr);
+		if (rc)
+			goto unregister;
 	}
 
 	if (!scanphys)
@@ -265,12 +273,19 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 			dev_info(&mdio->dev, "scan phy %s at address %i\n",
 				 child->name, addr);
 
-			if (of_mdiobus_child_is_phy(child))
-				of_mdiobus_register_phy(mdio, child, addr);
+			if (of_mdiobus_child_is_phy(child)) {
+				rc = of_mdiobus_register_phy(mdio, child, addr);
+				if (rc)
+					goto unregister;
+			}
 		}
 	}
 
 	return 0;
+
+unregister:
+	mdiobus_unregister(mdio);
+	return rc;
 }
 EXPORT_SYMBOL(of_mdiobus_register);
 
-- 
2.7.4