netdev - Re: [PATCH net-next v5 07/16] bpf: Add setsockopt helper function to bpf

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sat, 01 Jul 2017 02:01:25 +0200
From:   Daniel Borkmann <daniel@...earbox.net>
To:     Lawrence Brakmo <brakmo@...com>, netdev <netdev@...r.kernel.org>
CC:     Kernel Team <kernel-team@...com>, Blake Matheny <bmatheny@...com>,
        Alexei Starovoitov <ast@...com>,
        David Ahern <dsa@...ulusnetworks.com>
Subject: Re: [PATCH net-next v5 07/16] bpf: Add setsockopt helper function
 to bpf

On 06/30/2017 10:06 PM, Lawrence Brakmo wrote:
[...]
> @@ -2672,6 +2673,69 @@ static const struct bpf_func_proto bpf_get_socket_uid_proto = {
>   	.arg1_type      = ARG_PTR_TO_CTX,
>   };
>
> +BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock,
> +	   int, level, int, optname, char *, optval, int, optlen)
> +{
> +	struct sock *sk = bpf_sock->sk;
> +	int ret = 0;
> +	int val;
> +
> +	if (!sk_fullsock(sk))
> +		return -EINVAL;
> +
> +	if (level == SOL_SOCKET) {
> +		/* Only some socketops are supported */
> +		val = *((int *)optval);
> +
> +		switch (optname) {
> +		case SO_RCVBUF:
> +			sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
> +			sk->sk_rcvbuf = max_t(int, val * 2, SOCK_MIN_RCVBUF);
> +			break;
> +		case SO_SNDBUF:
> +			sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
> +			sk->sk_sndbuf = max_t(int, val * 2, SOCK_MIN_SNDBUF);
> +			break;
> +		case SO_MAX_PACING_RATE:
> +			sk->sk_max_pacing_rate = val;
> +			sk->sk_pacing_rate = min(sk->sk_pacing_rate,
> +						 sk->sk_max_pacing_rate);
> +			break;
> +		case SO_PRIORITY:
> +			sk->sk_priority = val;
> +			break;
> +		case SO_RCVLOWAT:
> +			if (val < 0)
> +				val = INT_MAX;
> +			sk->sk_rcvlowat = val ? : 1;
> +			break;
> +		case SO_MARK:
> +			sk->sk_mark = val;
> +			break;
> +		default:
> +			ret = -EINVAL;
> +		}
> +	} else if (level == SOL_TCP &&
> +		   sk->sk_prot->setsockopt == tcp_setsockopt) {
> +		/* Place holder */
> +		ret = -EINVAL;
> +	} else {
> +		ret = -EINVAL;
> +	}
> +	return ret;
> +}
> +
> +static const struct bpf_func_proto bpf_setsockopt_proto = {
> +	.func		= bpf_setsockopt,
> +	.gpl_only	= true,
> +	.ret_type	= RET_INTEGER,
> +	.arg1_type	= ARG_PTR_TO_CTX,
> +	.arg2_type	= ARG_ANYTHING,
> +	.arg3_type	= ARG_ANYTHING,
> +	.arg4_type	= ARG_PTR_TO_MEM,
> +	.arg5_type	= ARG_CONST_SIZE_OR_ZERO,

Hm, I had some feedback on this in your last revision of the patch
set [1] that a NULL pointer dereference can be triggered here. Probably
oversaw it; I mentioned wrt the above:

   Any reason you went with the ARG_CONST_SIZE_OR_ZERO type? Semantics
   of this are that allowed [arg4, arg5] pair can be i) [NULL, 0] or
   ii) [non-NULL, non-zero], where in case ii) verifier checks that the
   area is initialized when coming from BPF stack.

   So above 'val = *((int *)optval);' would give a NULL pointer deref
   with NULL passed as arg or in case optlen was < sizeof(int) we access
   stack out of bounds potentially. If the [NULL, 0] pair is not required,
   I would just make that a ARG_CONST_SIZE and then check for size before
   accessing optval.

Would be good if you could still address it in a most likely final respin.

Thanks,
Daniel

   [1] http://patchwork.ozlabs.org/patch/781800/