netdev - Re: [PATCH 2/2] net: ethernet: nb8800: Fix RGMII TX clock delay setup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 19 Jul 2017 11:30:33 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     Mason <slash.tmp@...e.fr>, Mans Rullgard <mans@...sr.com>
Cc:     Marc Gonzalez <marc_gonzalez@...madesigns.com>,
        Andrew Lunn <andrew@...n.ch>,
        Martin Blumenstingl <martin.blumenstingl@...il.com>,
        Grygorii Strashko <grygorii.strashko@...com>,
        Fabio Estevam <fabio.estevam@....com>,
        Zefir Kurtisi <zefir.kurtisi@...atec.com>,
        Timur Tabi <timur@...eaurora.org>,
        Daniel Mack <zonque@...il.com>,
        netdev <netdev@...r.kernel.org>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        "David S. Miller" <davem@...emloft.net>,
        Thibaud Cornic <thibaud_cornic@...madesigns.com>
Subject: Re: [PATCH 2/2] net: ethernet: nb8800: Fix RGMII TX clock delay setup

On 07/19/2017 10:36 AM, Mason wrote:
> On 19/07/2017 19:17, Måns Rullgård wrote:
> 
>> Marc Gonzalez writes:
>>
>>> According to commit e5f3a4a56ce2a707b2fb8ce37e4414dcac89c672
>>> ("Documentation: devicetree: clarify usage of the RGMII phy-modes")
>>> there are 4 RGMII phy-modes to handle:
>>>
>>> "rgmii" (RX and TX delays are added by the MAC when required)
>>> "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY,
>>> 	the MAC should not add the RX or TX delays in this case)
>>> "rgmii-rxid" (RGMII with internal RX delay provided by the PHY,
>>> 	the MAC should not add an RX delay in this case)
>>> "rgmii-txid" (RGMII with internal TX delay provided by the PHY,
>>> 	the MAC should not add an TX delay in this case)
>>>
>>> Let the MAC handle TX clock delay for rgmii and rgmii-rxid.
>>>
>>> Signed-off-by: Marc Gonzalez <marc_gonzalez@...madesigns.com>
>>> ---
>>>  drivers/net/ethernet/aurora/nb8800.c | 8 +++++---
>>>  1 file changed, 5 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/net/ethernet/aurora/nb8800.c b/drivers/net/ethernet/aurora/nb8800.c
>>> index 041cfb7952f8..f3ed320eb4ad 100644
>>> --- a/drivers/net/ethernet/aurora/nb8800.c
>>> +++ b/drivers/net/ethernet/aurora/nb8800.c
>>> @@ -609,7 +609,7 @@ static void nb8800_mac_config(struct net_device *dev)
>>>  		mac_mode |= HALF_DUPLEX;
>>>
>>>  	if (gigabit) {
>>> -		if (priv->phy_mode == PHY_INTERFACE_MODE_RGMII)
>>> +		if (phy_interface_is_rgmii(dev->phydev))
>>>  			mac_mode |= RGMII_MODE;
>>>
>>>  		mac_mode |= GMAC_MODE;
>>
>> This is a separate issue, and the change is obviously correct.
>>
>>> @@ -1268,11 +1268,13 @@ static int nb8800_tangox_init(struct net_device *dev)
>>>  		break;
>>>
>>>  	case PHY_INTERFACE_MODE_RGMII:
>>> -		pad_mode = PAD_MODE_RGMII;
>>> +	case PHY_INTERFACE_MODE_RGMII_RXID:
>>> +		pad_mode = PAD_MODE_RGMII | PAD_MODE_GTX_CLK_DELAY;
>>>  		break;
>>>
>>> +	case PHY_INTERFACE_MODE_RGMII_ID:
>>>  	case PHY_INTERFACE_MODE_RGMII_TXID:
>>> -		pad_mode = PAD_MODE_RGMII | PAD_MODE_GTX_CLK_DELAY;
>>> +		pad_mode = PAD_MODE_RGMII;
>>>  		break;
>>
>> Won't this just make it break in a different set of circumstances?
> 
> I don't think so, and here's my reasoning:
> 
> AFAIU, the HW block always requires a TX clock delay
> (I don't know what the "safe" interval is. PHY adds
> 2.4 ns, MAC adds ~1 ns, both work.)

The nominal delay should be 2ns because that's exactly what a 90 degrees
shift at a 125Mhz would be. The RGMII specification defines the following:

TskewT - Data to Clock output Skew (At Transmitter) Min: -500ns, Nom: 0,
Max: + 500 ns
TskewR - Data to Clock input Skew (At Receiver) Min: 1ns, Nom: 0, Max:
2.6ns (see note 1)

note 1: This implies that PC board design will require clocks to be
routed such that an additional trace delay of greater than 1.5ns and
less than 2.0ns will be added to the associated clock signal. For 10/100
the Max value is unspecified.

So it seems to me like you are borderline spec in both delays you gave
here and the "HW block always requires a TX clock delay" statement is
true for a given board design only.


> RX clock delay seems to be "Don't Care" (tested both
> enabled and disabled by PHY)
> By "tested", I mean ability to ping remote system.

Can you do something a bit more stressful than just a ping, also if you
have the ability to change the inter-packet gap, do it, and see if you
start seeing FCS or any other decoding errors.

> 
> If phy-mode is RGMII or RGMII_RXID, then don't add
> TX clock delay from PHY, therefore add it from MAC.
> 
> If phy_mode is RGMII_ID or RGMII_TXID, then do add
> TX clock delay from PHY, therefore don't add it from MAC.
> 
> What set of circumstances would create an issue?

Existing Device Tree sources that do not correspond to that description
you just did, I suppose they are all out of tree?
-- 
Florian