| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 20 Aug 2017 16:49:04 +0300
From: Saeed Mahameed <saeedm@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, Leon Romanovsky <leonro@...lanox.com>,
Shalom Lagziel <shaloml@...lanox.com>,
Saeed Mahameed <saeedm@...lanox.com>
Subject: [V2 net-next 03/15] net/mlx5e: IPoIB, Add support for get_link_ksettings in ethtool
From: Shalom Lagziel <shaloml@...lanox.com>
Add support for "ethtool DEVNAME" over ipoib ports,
Display standard port information for IPoIB netdevices using ethtool
For example:
$ ethtool ib2
> Settings for ib2:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Speed: 100000Mb/s
Duplex: Full
Port: Other
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
Link detected: yes
Signed-off-by: Shalom Lagziel <shaloml@...lanox.com>
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
.../ethernet/mellanox/mlx5/core/ipoib/ethtool.c | 130 +++++++++++++++++++--
1 file changed, 118 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c
index b080fabfe8de..dd49a59854e5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c
@@ -131,17 +131,123 @@ static int mlx5i_flash_device(struct net_device *netdev,
return mlx5e_ethtool_flash_device(priv, flash);
}
+enum mlx5_ptys_width {
+ MLX5_PTYS_WIDTH_1X = 1 << 0,
+ MLX5_PTYS_WIDTH_2X = 1 << 1,
+ MLX5_PTYS_WIDTH_4X = 1 << 2,
+ MLX5_PTYS_WIDTH_8X = 1 << 3,
+ MLX5_PTYS_WIDTH_12X = 1 << 4,
+};
+
+static inline int mlx5_ptys_width_enum_to_int(enum mlx5_ptys_width width)
+{
+ switch (width) {
+ case MLX5_PTYS_WIDTH_1X: return 1;
+ case MLX5_PTYS_WIDTH_2X: return 2;
+ case MLX5_PTYS_WIDTH_4X: return 4;
+ case MLX5_PTYS_WIDTH_8X: return 8;
+ case MLX5_PTYS_WIDTH_12X: return 12;
+ default: return -1;
+ }
+}
+
+enum mlx5_ptys_rate {
+ MLX5_PTYS_RATE_SDR = 1 << 0,
+ MLX5_PTYS_RATE_DDR = 1 << 1,
+ MLX5_PTYS_RATE_QDR = 1 << 2,
+ MLX5_PTYS_RATE_FDR10 = 1 << 3,
+ MLX5_PTYS_RATE_FDR = 1 << 4,
+ MLX5_PTYS_RATE_EDR = 1 << 5,
+ MLX5_PTYS_RATE_HDR = 1 << 6,
+};
+
+static inline int mlx5_ptys_rate_enum_to_int(enum mlx5_ptys_rate rate)
+{
+ switch (rate) {
+ case MLX5_PTYS_RATE_SDR: return 2500;
+ case MLX5_PTYS_RATE_DDR: return 5000;
+ case MLX5_PTYS_RATE_QDR:
+ case MLX5_PTYS_RATE_FDR10: return 10000;
+ case MLX5_PTYS_RATE_FDR: return 14000;
+ case MLX5_PTYS_RATE_EDR: return 25000;
+ case MLX5_PTYS_RATE_HDR: return 50000;
+ default: return -1;
+ }
+}
+
+static int mlx5i_get_port_settings(struct net_device *netdev,
+ u16 *ib_link_width_oper, u16 *ib_proto_oper)
+{
+ struct mlx5e_priv *priv = mlx5i_epriv(netdev);
+ struct mlx5_core_dev *mdev = priv->mdev;
+ u32 out[MLX5_ST_SZ_DW(ptys_reg)] = {0};
+ int ret;
+
+ ret = mlx5_query_port_ptys(mdev, out, sizeof(out), MLX5_PTYS_IB, 1);
+ if (ret)
+ return ret;
+
+ *ib_link_width_oper = MLX5_GET(ptys_reg, out, ib_link_width_oper);
+ *ib_proto_oper = MLX5_GET(ptys_reg, out, ib_proto_oper);
+
+ return 0;
+}
+
+static int mlx5i_get_speed_settings(u16 ib_link_width_oper, u16 ib_proto_oper)
+{
+ int rate, width;
+
+ rate = mlx5_ptys_rate_enum_to_int(ib_proto_oper);
+ if (rate < 0)
+ return -EINVAL;
+ width = mlx5_ptys_width_enum_to_int(ib_link_width_oper);
+ if (width < 0)
+ return -EINVAL;
+
+ return rate * width;
+}
+
+static int mlx5i_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *link_ksettings)
+{
+ u16 ib_link_width_oper;
+ u16 ib_proto_oper;
+ int speed, ret;
+
+ ret = mlx5i_get_port_settings(netdev, &ib_link_width_oper, &ib_proto_oper);
+ if (ret)
+ return ret;
+
+ ethtool_link_ksettings_zero_link_mode(link_ksettings, supported);
+ ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising);
+
+ speed = mlx5i_get_speed_settings(ib_link_width_oper, ib_proto_oper);
+ if (speed < 0)
+ return -EINVAL;
+
+ link_ksettings->base.duplex = DUPLEX_FULL;
+ link_ksettings->base.port = PORT_OTHER;
+
+ link_ksettings->base.autoneg = AUTONEG_DISABLE;
+
+ link_ksettings->base.speed = speed;
+
+ return 0;
+}
+
const struct ethtool_ops mlx5i_ethtool_ops = {
- .get_drvinfo = mlx5i_get_drvinfo,
- .get_strings = mlx5i_get_strings,
- .get_sset_count = mlx5i_get_sset_count,
- .get_ethtool_stats = mlx5i_get_ethtool_stats,
- .get_ringparam = mlx5i_get_ringparam,
- .set_ringparam = mlx5i_set_ringparam,
- .flash_device = mlx5i_flash_device,
- .get_channels = mlx5i_get_channels,
- .set_channels = mlx5i_set_channels,
- .get_coalesce = mlx5i_get_coalesce,
- .set_coalesce = mlx5i_set_coalesce,
- .get_ts_info = mlx5i_get_ts_info,
+ .get_drvinfo = mlx5i_get_drvinfo,
+ .get_strings = mlx5i_get_strings,
+ .get_sset_count = mlx5i_get_sset_count,
+ .get_ethtool_stats = mlx5i_get_ethtool_stats,
+ .get_ringparam = mlx5i_get_ringparam,
+ .set_ringparam = mlx5i_set_ringparam,
+ .flash_device = mlx5i_flash_device,
+ .get_channels = mlx5i_get_channels,
+ .set_channels = mlx5i_set_channels,
+ .get_coalesce = mlx5i_get_coalesce,
+ .set_coalesce = mlx5i_set_coalesce,
+ .get_ts_info = mlx5i_get_ts_info,
+ .get_link_ksettings = mlx5i_get_link_ksettings,
+ .get_link = ethtool_op_get_link,
};
--
2.13.0
Powered by blists - more mailing lists