| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 17 Oct 2017 11:21:11 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Alan Brady <alan.brady@...el.com>, netdev@...r.kernel.org,
nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 07/15] i40e: fix whitespace issues in i40e_ethtool.c
From: Alan Brady <alan.brady@...el.com>
There's a number of minor incidental whitespace issues in this file.
This addresses most of the ones I could find.
Signed-off-by: Alan Brady <alan.brady@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 44 +++++++++++---------------
1 file changed, 18 insertions(+), 26 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index e40fb559dacb..89ab398a7d30 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -511,7 +511,8 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
break;
default:
/* if we got here and link is up something bad is afoot */
- netdev_info(netdev, "WARNING: Link is up but PHY type 0x%x is not recognized.\n",
+ netdev_info(netdev,
+ "WARNING: Link is up but PHY type 0x%x is not recognized.\n",
hw_link_info->phy_type);
}
@@ -614,14 +615,12 @@ static int i40e_get_link_ksettings(struct net_device *netdev,
ks->base.autoneg = ((hw_link_info->an_info & I40E_AQ_AN_COMPLETED) ?
AUTONEG_ENABLE : AUTONEG_DISABLE);
+ /* Set media type settings */
switch (hw->phy.media_type) {
case I40E_MEDIA_TYPE_BACKPLANE:
- ethtool_link_ksettings_add_link_mode(ks, supported,
- Autoneg);
- ethtool_link_ksettings_add_link_mode(ks, supported,
- Backplane);
- ethtool_link_ksettings_add_link_mode(ks, advertising,
- Autoneg);
+ ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
+ ethtool_link_ksettings_add_link_mode(ks, supported, Backplane);
+ ethtool_link_ksettings_add_link_mode(ks, advertising, Autoneg);
ethtool_link_ksettings_add_link_mode(ks, advertising,
Backplane);
ks->base.port = PORT_NONE;
@@ -652,16 +651,14 @@ static int i40e_get_link_ksettings(struct net_device *netdev,
switch (hw->fc.requested_mode) {
case I40E_FC_FULL:
- ethtool_link_ksettings_add_link_mode(ks, advertising,
- Pause);
+ ethtool_link_ksettings_add_link_mode(ks, advertising, Pause);
break;
case I40E_FC_TX_PAUSE:
ethtool_link_ksettings_add_link_mode(ks, advertising,
Asym_Pause);
break;
case I40E_FC_RX_PAUSE:
- ethtool_link_ksettings_add_link_mode(ks, advertising,
- Pause);
+ ethtool_link_ksettings_add_link_mode(ks, advertising, Pause);
ethtool_link_ksettings_add_link_mode(ks, advertising,
Asym_Pause);
break;
@@ -708,17 +705,14 @@ static int i40e_set_link_ksettings(struct net_device *netdev,
i40e_partition_setting_complaint(pf);
return -EOPNOTSUPP;
}
-
if (vsi != pf->vsi[pf->lan_vsi])
return -EOPNOTSUPP;
-
if (hw->phy.media_type != I40E_MEDIA_TYPE_BASET &&
hw->phy.media_type != I40E_MEDIA_TYPE_FIBER &&
hw->phy.media_type != I40E_MEDIA_TYPE_BACKPLANE &&
hw->phy.media_type != I40E_MEDIA_TYPE_DA &&
hw->phy.link_info.link_info & I40E_AQ_LINK_UP)
return -EOPNOTSUPP;
-
if (hw->device_id == I40E_DEV_ID_KX_B ||
hw->device_id == I40E_DEV_ID_KX_C ||
hw->device_id == I40E_DEV_ID_20G_KR2 ||
@@ -844,7 +838,6 @@ static int i40e_set_link_ksettings(struct net_device *netdev,
*/
if (!config.link_speed)
config.link_speed = abilities.link_speed;
-
if (change || (abilities.link_speed != config.link_speed)) {
/* copy over the rest of the abilities */
config.phy_type = abilities.phy_type;
@@ -872,7 +865,8 @@ static int i40e_set_link_ksettings(struct net_device *netdev,
/* make the aq call */
status = i40e_aq_set_phy_config(hw, &config, NULL);
if (status) {
- netdev_info(netdev, "Set phy config failed, err %s aq_err %s\n",
+ netdev_info(netdev,
+ "Set phy config failed, err %s aq_err %s\n",
i40e_stat_str(hw, status),
i40e_aq_str(hw, hw->aq.asq_last_status));
err = -EAGAIN;
@@ -881,7 +875,8 @@ static int i40e_set_link_ksettings(struct net_device *netdev,
status = i40e_update_link_info(hw);
if (status)
- netdev_dbg(netdev, "Updating link info failed with err %s aq_err %s\n",
+ netdev_dbg(netdev,
+ "Updating link info failed with err %s aq_err %s\n",
i40e_stat_str(hw, status),
i40e_aq_str(hw, hw->aq.asq_last_status));
@@ -2072,14 +2067,13 @@ static int __i40e_get_coalesce(struct net_device *netdev,
ec->tx_max_coalesced_frames_irq = vsi->work_limit;
ec->rx_max_coalesced_frames_irq = vsi->work_limit;
- /* rx and tx usecs has per queue value. If user doesn't specify the queue,
- * return queue 0's value to represent.
+ /* rx and tx usecs has per queue value. If user doesn't specify the
+ * queue, return queue 0's value to represent.
*/
- if (queue < 0) {
+ if (queue < 0)
queue = 0;
- } else if (queue >= vsi->num_queue_pairs) {
+ else if (queue >= vsi->num_queue_pairs)
return -EINVAL;
- }
rx_ring = vsi->rx_rings[queue];
tx_ring = vsi->tx_rings[queue];
@@ -2093,7 +2087,6 @@ static int __i40e_get_coalesce(struct net_device *netdev,
ec->rx_coalesce_usecs = rx_ring->rx_itr_setting & ~I40E_ITR_DYNAMIC;
ec->tx_coalesce_usecs = tx_ring->tx_itr_setting & ~I40E_ITR_DYNAMIC;
-
/* we use the _usecs_high to store/set the interrupt rate limit
* that the hardware supports, that almost but not quite
* fits the original intent of the ethtool variable,
@@ -2143,7 +2136,6 @@ static int i40e_get_per_queue_coalesce(struct net_device *netdev, u32 queue,
*
* Change the ITR settings for a specific queue.
**/
-
static void i40e_set_itr_per_queue(struct i40e_vsi *vsi,
struct ethtool_coalesce *ec,
int queue)
@@ -2265,8 +2257,8 @@ static int __i40e_set_coalesce(struct net_device *netdev,
vsi->int_rate_limit);
}
- /* rx and tx usecs has per queue value. If user doesn't specify the queue,
- * apply to all queues.
+ /* rx and tx usecs has per queue value. If user doesn't specify the
+ * queue, apply to all queues.
*/
if (queue < 0) {
for (i = 0; i < vsi->num_queue_pairs; i++)
--
2.14.2
Powered by blists - more mailing lists