netdev - Re: [PATCH v7 02/10] arm: dts: sunxi: Restore EMAC changes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 19 Oct 2017 08:57:46 +0200
From:   Maxime Ripard <maxime.ripard@...e-electrons.com>
To:     Corentin Labbe <clabbe.montjoie@...il.com>
Cc:     Andrew Lunn <andrew@...n.ch>, robh+dt@...nel.org,
        mark.rutland@....com, wens@...e.org, linux@...linux.org.uk,
        catalin.marinas@....com, will.deacon@....com,
        peppe.cavallaro@...com, alexandre.torgue@...com,
        f.fainelli@...il.com, frowand.list@...il.com,
        netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-sunxi@...glegroups.com
Subject: Re: [PATCH v7 02/10] arm: dts: sunxi: Restore EMAC changes

On Wed, Oct 18, 2017 at 08:50:49PM +0200, Corentin Labbe wrote:
> On Wed, Oct 18, 2017 at 06:44:50PM +0200, Andrew Lunn wrote:
> > On Wed, Oct 18, 2017 at 01:44:50PM +0200, Corentin Labbe wrote:
> > > The original dwmac-sun8i DT bindings have some issue on how to handle
> > > integrated PHY and was reverted in last RC of 4.13.
> > > But now we have a solution so we need to get back that was reverted.
> > > 
> > > This patch restore arm DT about dwmac-sun8i
> > > This reverts commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes")
> > > 
> > > Signed-off-by: Corentin Labbe <clabbe.montjoie@...il.com>
> > > ---
> > >  arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts |  9 ++++++++
> > >  arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts   | 19 +++++++++++++++++
> > >  arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts     | 19 +++++++++++++++++
> > >  arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts         |  7 ++++++
> > >  arch/arm/boot/dts/sun8i-h3-orangepi-2.dts         |  8 +++++++
> > >  arch/arm/boot/dts/sun8i-h3-orangepi-one.dts       |  8 +++++++
> > >  arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts   |  5 +++++
> > >  arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts        |  8 +++++++
> > >  arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts      | 22 +++++++++++++++++++
> > >  arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts    | 16 ++++++++++++++
> > >  arch/arm/boot/dts/sunxi-h3-h5.dtsi                | 26 +++++++++++++++++++++++
> > >  11 files changed, 147 insertions(+)
> > > 
> > > diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
> > > index b1502df7b509..6713d0f2b3f4 100644
> > > --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
> > > +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
> > > @@ -56,6 +56,8 @@
> > >  
> > >  	aliases {
> > >  		serial0 = &uart0;
> > > +		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
> > > +		ethernet0 = &emac;
> > >  		ethernet1 = &xr819;
> > >  	};
> > >  
> > > @@ -102,6 +104,13 @@
> > >  	status = "okay";
> > >  };
> > >  
> > > +&emac {
> > > +	phy-handle = <&int_mii_phy>;
> > > +	phy-mode = "mii";
> > > +	allwinner,leds-active-low;
> > > +	status = "okay";
> > > +};
> > > +
> > >  &mmc0 {
> > >  	pinctrl-names = "default";
> > >  	pinctrl-0 = <&mmc0_pins_a>;
> > > diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
> > > index e1dba9ffa94b..f2292deaa590 100644
> > > --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
> > > +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
> > > @@ -52,6 +52,7 @@
> > >  	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
> > >  
> > >  	aliases {
> > > +		ethernet0 = &emac;
> > >  		serial0 = &uart0;
> > >  		serial1 = &uart1;
> > >  	};
> > > @@ -111,6 +112,24 @@
> > >  	status = "okay";
> > >  };
> > >  
> > > +&emac {
> > > +	pinctrl-names = "default";
> > > +	pinctrl-0 = <&emac_rgmii_pins>;
> > > +	phy-supply = <&reg_gmac_3v3>;
> > > +	phy-handle = <&ext_rgmii_phy>;
> > > +	phy-mode = "rgmii";
> > > +
> > > +	allwinner,leds-active-low;
> > > +	status = "okay";
> > > +};
> > > +
> > 
> > 
> > > +&external_mdio {
> > > +	ext_rgmii_phy: ethernet-phy@1 {
> > > +		compatible = "ethernet-phy-ieee802.3-c22";
> > > +		reg = <0>;
> > > +	};
> > > +};
> > > +
> > 
> > Hi Corentin
> > 
> > I'm wondering about the order of the patches. Does the external_mdio
> > node actually exist at this point? Or only later when other patches
> > are applied?
> > 
> 
> You are right order of patch are wrong, I need to cut this one in two.
> "Revert²" sunxi-h3-h5.dtsi
> apply mdiomux
> "Revert²" all board nodes

I'm not even sure why you're actually adding them that way. Can't you
just create the new binding file, support it in the driver, and add
the matching DT nodes ?

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)