[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date: Tue, 12 Dec 2017 09:29:51 +0000
From: Russell King <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Mark Rutland <mark.rutland@....com>, netdev@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <kernel@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
Stefan Agner <stefan@...er.ch>,
Vivien Didelot <vivien.didelot@...oirfairelinux.com>
Subject: [PATCH 2/2] ARM: dts: vf610-zii-dev: use XAUI for DSA link ports
Use XAUI rather than XGMII for DSA link ports, as this is the interface
mode that the switches actually use. XAUI is the 4 lane bus with clock
per direction, whereas XGMII is a 32 bit bus with clock.
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
This must be applied along with patch 1 to avoid breakage.
arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index 1b102c7f7928..4a972fceb3b5 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -128,7 +128,7 @@
switch0port10: port@10 {
reg = <10>;
label = "dsa";
- phy-mode = "xgmii";
+ phy-mode = "xaui";
link = <&switch1port10>;
};
};
@@ -233,7 +233,7 @@
switch1port10: port@10 {
reg = <10>;
label = "dsa";
- phy-mode = "xgmii";
+ phy-mode = "xaui";
link = <&switch0port10>;
};
};
--
2.7.4
Powered by blists - more mailing lists