netdev - [net 1/4] i40e: Remove UDP support for big buffer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed,  3 Jan 2018 09:33:14 -0800
From:   Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:     davem@...emloft.net
Cc:     Amritha Nambiar <amritha.nambiar@...el.com>,
        netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com,
        jogreene@...hat.com, Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net 1/4] i40e: Remove UDP support for big buffer

From: Amritha Nambiar <amritha.nambiar@...el.com>

Since UDP based filters are not supported via big buffer cloud
filters, remove UDP support.  Also change a few return types to
indicate unsupported vs invalid configuration.

Signed-off-by: Amritha Nambiar <amritha.nambiar@...el.com>
Acked-by: Alexander Duyck <alexander.h.duyck@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 321d8be80871..fffd4868defb 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6038,8 +6038,8 @@ static int i40e_validate_and_set_switch_mode(struct i40e_vsi *vsi)
 	/* Set Bit 7 to be valid */
 	mode = I40E_AQ_SET_SWITCH_BIT7_VALID;
 
-	/* Set L4type to both TCP and UDP support */
-	mode |= I40E_AQ_SET_SWITCH_L4_TYPE_BOTH;
+	/* Set L4type for TCP support */
+	mode |= I40E_AQ_SET_SWITCH_L4_TYPE_TCP;
 
 	/* Set cloud filter mode */
 	mode |= I40E_AQ_SET_SWITCH_MODE_NON_TUNNEL;
@@ -6969,18 +6969,18 @@ static int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi,
 	     is_valid_ether_addr(filter->src_mac)) ||
 	    (is_multicast_ether_addr(filter->dst_mac) &&
 	     is_multicast_ether_addr(filter->src_mac)))
-		return -EINVAL;
+		return -EOPNOTSUPP;
 
-	/* Make sure port is specified, otherwise bail out, for channel
-	 * specific cloud filter needs 'L4 port' to be non-zero
+	/* Big buffer cloud filter needs 'L4 port' to be non-zero. Also, UDP
+	 * ports are not supported via big buffer now.
 	 */
-	if (!filter->dst_port)
-		return -EINVAL;
+	if (!filter->dst_port || filter->ip_proto == IPPROTO_UDP)
+		return -EOPNOTSUPP;
 
 	/* adding filter using src_port/src_ip is not supported at this stage */
 	if (filter->src_port || filter->src_ipv4 ||
 	    !ipv6_addr_any(&filter->ip.v6.src_ip6))
-		return -EINVAL;
+		return -EOPNOTSUPP;
 
 	/* copy element needed to add cloud filter from filter */
 	i40e_set_cld_element(filter, &cld_filter.element);
@@ -6991,7 +6991,7 @@ static int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi,
 	    is_multicast_ether_addr(filter->src_mac)) {
 		/* MAC + IP : unsupported mode */
 		if (filter->dst_ipv4)
-			return -EINVAL;
+			return -EOPNOTSUPP;
 
 		/* since we validated that L4 port must be valid before
 		 * we get here, start with respective "flags" value
-- 
2.15.1