netdev - [net-next 12/15] i40evf: Drop i40evf_fire_sw

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed,  3 Jan 2018 13:22:19 -0800
From:   Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:     davem@...emloft.net
Cc:     Alexander Duyck <alexander.h.duyck@...el.com>,
        netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com,
        jogreene@...hat.com, Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 12/15] i40evf: Drop i40evf_fire_sw_int as it is prone to races

From: Alexander Duyck <alexander.h.duyck@...el.com>

Having the interrupts firing while we are polling causes extra overhead and
isn't needed for most systems out there. If an interrupt is lost us
experiencing a 2s latency spike before recovering is still not acceptable
and masks the issue. We are better off just identifying systems that lose
interrupts and instead enable workarounds for those systems.

To that end I am dropping the code that was strobing the interrupts as
there is a narrow window where having them enabled can actually cause
race issues anyway where a few stray packets might get misses if the
interrupt is re-enabled and fires before we call napi_complete.

Also replace one line where we were using bit 31 instead of the define
for the bit to represent masking the interrupt enable bit.

Signed-off-by: Alexander Duyck <alexander.h.duyck@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 34 -------------------------
 1 file changed, 34 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 5fff62a45323..f92587aba3c7 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -281,33 +281,6 @@ void i40evf_irq_enable_queues(struct i40evf_adapter *adapter, u32 mask)
 	}
 }
 
-/**
- * i40evf_fire_sw_int - Generate SW interrupt for specified vectors
- * @adapter: board private structure
- * @mask: bitmap of vectors to trigger
- **/
-static void i40evf_fire_sw_int(struct i40evf_adapter *adapter, u32 mask)
-{
-	struct i40e_hw *hw = &adapter->hw;
-	int i;
-	u32 dyn_ctl;
-
-	if (mask & 1) {
-		dyn_ctl = rd32(hw, I40E_VFINT_DYN_CTL01);
-		dyn_ctl |= I40E_VFINT_DYN_CTLN1_SWINT_TRIG_MASK |
-			   I40E_VFINT_DYN_CTLN1_ITR_INDX_MASK;
-		wr32(hw, I40E_VFINT_DYN_CTL01, dyn_ctl);
-	}
-	for (i = 1; i < adapter->num_msix_vectors; i++) {
-		if (mask & BIT(i)) {
-			dyn_ctl = rd32(hw, I40E_VFINT_DYN_CTLN1(i - 1));
-			dyn_ctl |= I40E_VFINT_DYN_CTLN1_SWINT_TRIG_MASK |
-				   I40E_VFINT_DYN_CTLN1_ITR_INDX_MASK;
-			wr32(hw, I40E_VFINT_DYN_CTLN1(i - 1), dyn_ctl);
-		}
-	}
-}
-
 /**
  * i40evf_irq_enable - Enable default interrupt generation settings
  * @adapter: board private structure
@@ -1743,13 +1716,6 @@ static void i40evf_watchdog_task(struct work_struct *work)
 	if (adapter->state == __I40EVF_RUNNING)
 		i40evf_request_stats(adapter);
 watchdog_done:
-	if (adapter->state == __I40EVF_RUNNING) {
-		i40evf_irq_enable_queues(adapter, ~0);
-		i40evf_fire_sw_int(adapter, 0xFF);
-	} else {
-		i40evf_fire_sw_int(adapter, 0x1);
-	}
-
 	clear_bit(__I40EVF_IN_CRITICAL_TASK, &adapter->crit_section);
 restart_watchdog:
 	if (adapter->state == __I40EVF_REMOVE)
-- 
2.15.1