Starting kernel ... Booting Linux on physical CPU 0x0 Linux version 4.14.0-xilinx (84alav@fedora64) (gcc version 5.4.0 (Buildroot 2017.05.1)) #15 SMP PREEMPT Mon Mar 19 12:30:34 IST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt: Machine model: Zynq Zed Development Board Memory policy: Data cache writealloc cma: Reserved 16 MiB at 0x1dc00000 percpu: Embedded 16 pages/cpu @dfbc5000 s34764 r8192 d22580 u65536 Built 1 zonelists, mobility grouping on. Total pages: 130048 Kernel command line: PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 490488K/524288K available (5120K kernel code, 224K rwdata, 1404K rodata, 1024K init, 150K bss, 17416K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0600000 (6112 kB) .init : 0xc0800000 - 0xc0900000 (1024 kB) .data : 0xc0900000 - 0xc0938000 ( 224 kB) .bss : 0xc0938000 - 0xc095da14 ( 151 kB) Preemptible hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. Tasks RCU enabled. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 efuse mapped to e0800000 slcr mapped to e0802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at e0802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns timer #0 at e080a000, irq=17 Console: colour dummy device 80x30 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100060 Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 smp: Brought up 1 node, 2 CPUs SMP: Total of 2 processors activated (1333.33 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized random: get_random_u32 called from bucket_table_alloc+0x1c4/0x224 with crng_init=0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 random: fast init done DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xe0840000 zynq-pinctrl 700.pinctrl: zynq pinctrl initialized e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 25, base_baud = 6249999) is a xuartps console [ttyPS0] enabled vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 FPGA manager framework clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Trying to unpack rootfs image as initramfs... Freeing initrd memory: 3604K hw perfevents: no interrupt-affinity property for /pmu, guessing. hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available workingset: timestamp_bits=30 max_order=17 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) ?© 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 brd: module loaded loop: module loaded libphy: Fixed MDIO Bus: probed CAN device driver interface mv88e6xxx_init kelev libphy: MACB_mii_bus: probed mdio_bus e000b000.ethernet-ffffffff: /amba/ethernet@e000b000/fixed-link has invalid PHY address mv88e6085 e000b000.ethernet-ffffffff:1d: switch 0xa10 detected: Marvell 88E6390X, revision 1 libphy: mv88e6xxx SMI: probed DSA: switch 0 0 parsed Tree has no master device mv88e6085: probe of e000b000.ethernet-ffffffff:1d failed with error -22 mv88e6085 e000b000.ethernet-ffffffff:1c: switch 0xa10 detected: Marvell 88E6390X, revision 1 libphy: mv88e6xxx SMI: probed DSA: switch 0 0 parsed Tree has no master device mv88e6085: probe of e000b000.ethernet-ffffffff:1c failed with error -22 mdio_bus e000b000.ethernet-ffffffff: scan phy fixed-link at address 1 macb e000c000.ethernet: invalid hw address, using random libphy: MACB_mii_bus: probed macb: macb_mii_probe kelev macb e000c000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000c000 irq 28 (5e:89:7b:36:e5:d6) Generic PHY e000c000.ethernet-ffffffff:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000c000.ethernet-ffffffff:00, irq=POLL) ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage chipidea-usb2 e0002000.usb: e0002000.usb supply vbus not found, using dummy regulator ci_hdrc ci_hdrc.0: unable to init phy: -110 ci_hdrc: probe of ci_hdrc.0 failed with error -110 i2c /dev entries driver cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer at e0948000 with timeout 10s EDAC MC: ECC not enabled Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.sdhci [e0100000.sdhci] using ADMA usbcore: registered new interface driver usbhid usbhid: USB HID core driver fpga_manager fpga0: Xilinx Zynq FPGA Manager registered NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20170425 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20170425) can: broadcast manager protocol (rev 20170425 t) can: netlink gateway (rev 20170425) max_hops=1 Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) of_cfs_init of_cfs_init: OK Freeing unused kernel memory: 1024K /bin/mount: special device /dev/mmcblk0p1 does not exist /bin/mount: special device /dev/mmcblk0p2 does not exist /bin/mount: special device /dev/mmcblk0p3 does not exist Starting logging: OK Initializing random number generator... done. Starting network: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready OK Starting openntpd: creating new /var/db/ntpd.drift OK Starting dropbear sshd: OK Starting vsftpd: OK