netdev - Re: [PATCH 02/10] net: ax88796: Attach MII bus only when open

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 17 Apr 2018 00:59:00 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     Michael Schmitz <schmitzmic@...il.com>
Cc:     netdev@...r.kernel.org, linux-m68k@...r.kernel.org,
        Michael.Karcher@...berlin.de,
        Michael Karcher <debian@...rcher.dialup.fu-berlin.de>,
        Michael Karcher <kernel@...rcher.dialup.fu-berlin.de>
Subject: Re: [PATCH 02/10] net: ax88796: Attach MII bus only when open

On Tue, Apr 17, 2018 at 10:04:37AM +1200, Michael Schmitz wrote:
> From: Michael Karcher <debian@...rcher.dialup.fu-berlin.de>
> 
> Call ax_mii_init in ax_open(), and unregister/remove mdiobus resources
> in ax_close().
> 
> This is needed to be able to unload the module, as the module is busy
> while the MII bus is attached.
> 
> Signed-off-by: Michael Karcher <kernel@...rcher.dialup.fu-berlin.de>
> Signed-off-by: Michael Schmitz <schmitzmic@...il.com>
> ---
>  drivers/net/ethernet/8390/ax88796.c |   13 +++++++++----
>  1 files changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c
> index 2a256aa..f7b8911 100644
> --- a/drivers/net/ethernet/8390/ax88796.c
> +++ b/drivers/net/ethernet/8390/ax88796.c
> @@ -79,6 +79,8 @@
>  
>  static u32 ax_msg_enable;
>  
> +static int ax_mii_init(struct net_device *dev);

Hi Michael

We try to avoid forward declarations. Please can you move
ax_mii_init() so this is not needed.

> +
>  /* device private data */
>  
>  struct ax_device {
> @@ -396,6 +398,10 @@ static int ax_open(struct net_device *dev)
>  
>  	netdev_dbg(dev, "open\n");
>  
> +	ret = ax_mii_init(dev);
> +	if (ret)
> +		goto failed_request_irq;
> +
>  	ret = request_irq(dev->irq, ax_ei_interrupt, ax->irqflags,
>  			  dev->name, dev);
>  	if (ret)

You are missing some cleanup on error at the end of ax_open().
It was also missing before.

   Andrew