| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 14 May 2018 21:00:29 +0200
From: Toke Høiland-Jørgensen <toke@...e.dk>
To: netdev@...r.kernel.org
Cc: cake@...ts.bufferbloat.net
Subject: [PATCH net-next v10 6/7] sch_cake: Add overhead compensation
support to the rate shaper
This commit adds configurable overhead compensation support to the rate
shaper. With this feature, userspace can configure the actual bottleneck
link overhead and encapsulation mode used, which will be used by the shaper
to calculate the precise duration of each packet on the wire.
This feature is needed because CAKE is often deployed one or two hops
upstream of the actual bottleneck (which can be, e.g., inside a DSL or
cable modem). In this case, the link layer characteristics and overhead
reported by the kernel does not match the actual bottleneck. Being able to
set the actual values in use makes it possible to configure the shaper rate
much closer to the actual bottleneck rate (our experience shows it is
possible to get with 0.1% of the actual physical bottleneck rate), thus
keeping latency low without sacrificing bandwidth.
The overhead compensation has three tunables: A fixed per-packet overhead
size (which, if set, will be accounted from the IP packet header), a
minimum packet size (MPU) and a framing mode supporting either ATM or PTM
framing. We include a set of common keywords in TC to help users configure
the right parameters. If no overhead value is set, the value reported by
the kernel is used.
Signed-off-by: Toke Høiland-Jørgensen <toke@...e.dk>
---
net/sched/sch_cake.c | 123 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 122 insertions(+), 1 deletion(-)
diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c
index ccc6f26b306c..6314a089a204 100644
--- a/net/sched/sch_cake.c
+++ b/net/sched/sch_cake.c
@@ -275,6 +275,7 @@ enum {
struct cobalt_skb_cb {
cobalt_time_t enqueue_time;
+ u32 adjusted_len;
};
static cobalt_time_t cobalt_get_time(void)
@@ -1130,6 +1131,87 @@ static cobalt_time_t cake_ewma(cobalt_time_t avg, cobalt_time_t sample,
return avg;
}
+static u32 cake_overhead(struct cake_sched_data *q, struct sk_buff *skb)
+{
+ const struct skb_shared_info *shinfo = skb_shinfo(skb);
+ u32 off = skb_network_offset(skb);
+ u32 len = qdisc_pkt_len(skb);
+ u16 segs = 1;
+
+ if (unlikely(shinfo->gso_size)) {
+ /* borrowed from qdisc_pkt_len_init() */
+ unsigned int hdr_len;
+
+ hdr_len = skb_transport_header(skb) - skb_mac_header(skb);
+
+ /* + transport layer */
+ if (likely(shinfo->gso_type & (SKB_GSO_TCPV4 |
+ SKB_GSO_TCPV6))) {
+ const struct tcphdr *th;
+ struct tcphdr _tcphdr;
+
+ th = skb_header_pointer(skb, skb_transport_offset(skb),
+ sizeof(_tcphdr), &_tcphdr);
+ if (likely(th))
+ hdr_len += __tcp_hdrlen(th);
+ } else {
+ struct udphdr _udphdr;
+
+ if (skb_header_pointer(skb, skb_transport_offset(skb),
+ sizeof(_udphdr), &_udphdr))
+ hdr_len += sizeof(struct udphdr);
+ }
+
+ if (unlikely(shinfo->gso_type & SKB_GSO_DODGY))
+ segs = DIV_ROUND_UP(skb->len - hdr_len,
+ shinfo->gso_size);
+ else
+ segs = shinfo->gso_segs;
+
+ /* The last segment may be shorter; we ignore this, which means
+ * that we will over-estimate the size of the whole GSO segment
+ * by the difference in size. This is conservative, so we live
+ * with that to avoid the complexity of dealing with it.
+ */
+ len = shinfo->gso_size + hdr_len;
+ }
+
+ q->avg_netoff = cake_ewma(q->avg_netoff, off << 16, 8);
+
+ if (q->rate_flags & CAKE_FLAG_OVERHEAD)
+ len -= off;
+
+ if (q->max_netlen < len)
+ q->max_netlen = len;
+ if (q->min_netlen > len)
+ q->min_netlen = len;
+
+ len += q->rate_overhead;
+
+ if (len < q->rate_mpu)
+ len = q->rate_mpu;
+
+ if (q->atm_mode == CAKE_ATM_ATM) {
+ len += 47;
+ len /= 48;
+ len *= 53;
+ } else if (q->atm_mode == CAKE_ATM_PTM) {
+ /* Add one byte per 64 bytes or part thereof.
+ * This is conservative and easier to calculate than the
+ * precise value.
+ */
+ len += (len + 63) / 64;
+ }
+
+ if (q->max_adjlen < len)
+ q->max_adjlen = len;
+ if (q->min_adjlen > len)
+ q->min_adjlen = len;
+
+ get_cobalt_cb(skb)->adjusted_len = len * segs;
+ return len;
+}
+
static void cake_heap_swap(struct cake_sched_data *q, u16 i, u16 j)
{
struct cake_heap_entry ii = q->overflow_heap[i];
@@ -1207,7 +1289,7 @@ static int cake_advance_shaper(struct cake_sched_data *q,
struct sk_buff *skb,
u64 now, bool drop)
{
- u32 len = qdisc_pkt_len(skb);
+ u32 len = get_cobalt_cb(skb)->adjusted_len;
/* charge packet bandwidth to this tin
* and to the global shaper.
@@ -1396,6 +1478,7 @@ static s32 cake_enqueue(struct sk_buff *skb, struct Qdisc *sch,
b->max_skblen = len;
cobalt_set_enqueue_time(skb, now);
+ get_cobalt_cb(skb)->adjusted_len = cake_overhead(q, skb);
flow_queue_add(flow, skb);
if (q->ack_filter)
@@ -2172,6 +2255,31 @@ static int cake_change(struct Qdisc *sch, struct nlattr *opt,
!!nla_get_u32(tb[TCA_CAKE_NAT]);
}
+ if (tb[TCA_CAKE_ATM])
+ q->atm_mode = nla_get_u32(tb[TCA_CAKE_ATM]);
+
+ if (tb[TCA_CAKE_OVERHEAD]) {
+ q->rate_overhead = nla_get_s32(tb[TCA_CAKE_OVERHEAD]);
+ q->rate_flags |= CAKE_FLAG_OVERHEAD;
+
+ q->max_netlen = 0;
+ q->max_adjlen = 0;
+ q->min_netlen = ~0;
+ q->min_adjlen = ~0;
+ }
+
+ if (tb[TCA_CAKE_RAW]) {
+ q->rate_flags &= ~CAKE_FLAG_OVERHEAD;
+
+ q->max_netlen = 0;
+ q->max_adjlen = 0;
+ q->min_netlen = ~0;
+ q->min_adjlen = ~0;
+ }
+
+ if (tb[TCA_CAKE_MPU])
+ q->rate_mpu = nla_get_u32(tb[TCA_CAKE_MPU]);
+
if (tb[TCA_CAKE_RTT]) {
q->interval = nla_get_u32(tb[TCA_CAKE_RTT]);
@@ -2346,6 +2454,19 @@ static int cake_dump(struct Qdisc *sch, struct sk_buff *skb)
!!(q->rate_flags & CAKE_FLAG_WASH)))
goto nla_put_failure;
+ if (nla_put_u32(skb, TCA_CAKE_OVERHEAD, q->rate_overhead))
+ goto nla_put_failure;
+
+ if (!(q->rate_flags & CAKE_FLAG_OVERHEAD))
+ if (nla_put_u32(skb, TCA_CAKE_RAW, 0))
+ goto nla_put_failure;
+
+ if (nla_put_u32(skb, TCA_CAKE_ATM, q->atm_mode))
+ goto nla_put_failure;
+
+ if (nla_put_u32(skb, TCA_CAKE_MPU, q->rate_mpu))
+ goto nla_put_failure;
+
return nla_nest_end(skb, opts);
nla_put_failure:
Powered by blists - more mailing lists