netdev - Re: [net-next 1/6] net/dcb: Add dcbnl buffer attribute

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 21 May 2018 22:20:26 -0700
From:   Jakub Kicinski <jakub.kicinski@...ronome.com>
To:     Saeed Mahameed <saeedm@...lanox.com>
Cc:     "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
        Huy Nguyen <huyn@...lanox.com>, Jiri Pirko <jiri@...nulli.us>,
        Or Gerlitz <gerlitz.or@...il.com>
Subject: Re: [net-next 1/6] net/dcb: Add dcbnl buffer attribute

On Mon, 21 May 2018 14:04:57 -0700, Saeed Mahameed wrote:
> From: Huy Nguyen <huyn@...lanox.com>
> 
> In this patch, we add dcbnl buffer attribute to allow user
> change the NIC's buffer configuration such as priority
> to buffer mapping and buffer size of individual buffer.
> 
> This attribute combined with pfc attribute allows advance user to
> fine tune the qos setting for specific priority queue. For example,
> user can give dedicated buffer for one or more prirorities or user
> can give large buffer to certain priorities.
> 
> We present an use case scenario where dcbnl buffer attribute configured
> by advance user helps reduce the latency of messages of different sizes.
> 
> Scenarios description:
> On ConnectX-5, we run latency sensitive traffic with
> small/medium message sizes ranging from 64B to 256KB and bandwidth sensitive
> traffic with large messages sizes 512KB and 1MB. We group small, medium,
> and large message sizes to their own pfc enables priorities as follow.
>   Priorities 1 & 2 (64B, 256B and 1KB)
>   Priorities 3 & 4 (4KB, 8KB, 16KB, 64KB, 128KB and 256KB)
>   Priorities 5 & 6 (512KB and 1MB)
> 
> By default, ConnectX-5 maps all pfc enabled priorities to a single
> lossless fixed buffer size of 50% of total available buffer space. The
> other 50% is assigned to lossy buffer. Using dcbnl buffer attribute,
> we create three equal size lossless buffers. Each buffer has 25% of total
> available buffer space. Thus, the lossy buffer size reduces to 25%. Priority
> to lossless  buffer mappings are set as follow.
>   Priorities 1 & 2 on lossless buffer #1
>   Priorities 3 & 4 on lossless buffer #2
>   Priorities 5 & 6 on lossless buffer #3
> 
> We observe improvements in latency for small and medium message sizes
> as follows. Please note that the large message sizes bandwidth performance is
> reduced but the total bandwidth remains the same.
>   256B message size (42 % latency reduction)
>   4K message size (21% latency reduction)
>   64K message size (16% latency reduction)
> 
> Signed-off-by: Huy Nguyen <huyn@...lanox.com>
> Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>

On a cursory look this bares a lot of resemblance to devlink shared
buffer configuration ABI.  Did you look into using that?  

Just to be clear devlink shared buffer ABIs don't require representors
and "switchdev mode".