netdev - Re: [PATCH V3 8/8] dt-bindings: stm32: add compatible for syscon

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 23 May 2018 09:32:04 +0000
From:   Christophe ROULLIER <christophe.roullier@...com>
To:     Rob Herring <robh@...nel.org>
CC:     "mark.rutland@....com" <mark.rutland@....com>,
        "mcoquelin.stm32@...il.com" <mcoquelin.stm32@...il.com>,
        Alexandre TORGUE <alexandre.torgue@...com>,
        Peppe CAVALLARO <peppe.cavallaro@...com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "andrew@...n.ch" <andrew@...n.ch>
Subject: Re: [PATCH V3 8/8] dt-bindings: stm32: add compatible for syscon

On 05/22/2018 07:22 PM, Rob Herring wrote:
> On Mon, May 21, 2018 at 10:07:26AM +0200, Christophe Roullier wrote:
>> This patch describes syscon DT bindings.
>>
>> Signed-off-by: Christophe Roullier <christophe.roullier@...com>
>> ---
>>   Documentation/devicetree/bindings/arm/stm32.txt | 5 +++++
>>   1 file changed, 5 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/stm32.txt b/Documentation/devicetree/bindings/arm/stm32.txt
>> index 6808ed9..e46ebad 100644
>> --- a/Documentation/devicetree/bindings/arm/stm32.txt
>> +++ b/Documentation/devicetree/bindings/arm/stm32.txt
>> @@ -8,3 +8,8 @@ using one of the following compatible strings:
>>     st,stm32f746
>>     st,stm32h743
>>     st,stm32mp157
>> +
>> +Required nodes:
>> +- syscon: the soc bus node must have a system controller node pointing to the
>> +  global control registers, with the compatible string
>> +  "st,stm32mp157-syscfg", "syscon";
> 
> Please don't mix soc/board bindings with other nodes. So perhaps
> stm32-syscon.txt.
> 
> Rob
> 

Hi Rob,

Is it ok for you with this tree file:

Documentation/devicetree/bindings/arm/stm32/stm32.txt
Documentation/devicetree/bindings/arm/stm32/stm32-syscon.txt
	With stm32-syscon.txt:

---------------------------------------------------
STMicroelectronics STM32 Platforms System Controller

Properties:
  - compatible : should contain two values. First value must be :
		- " st,stm32mp157-syscfg " - for stm32mp157 based SoCs,
		second value must be always "syscon".
  - reg : offset and length of the register set.

Example:
	syscfg: system-config@...20000 {
		compatible = "st,stm32mp157-syscfg", "syscon";
		reg = <0x50020000 0x400>;
	};
---------------------------------------------------

Do we need to update also all MCU family (stm32f4, stm32h7, stm32f7) 
property to be coherent ?

Thanks for your feedback.

Christophe.