Date:   Wed, 27 Jun 2018 15:31:50 -0700
From:   Amritha Nambiar <amritha.nambiar@...el.com>
To:     netdev@...r.kernel.org, davem@...emloft.net
Cc:     alexander.h.duyck@...el.com, willemdebruijn.kernel@...il.com,
        amritha.nambiar@...el.com, sridhar.samudrala@...el.com,
        alexander.duyck@...il.com, edumazet@...gle.com,
        hannes@...essinduktion.org, tom@...bertland.com, tom@...ntonium.net
Subject: [net-next PATCH v5 7/7] Documentation: Add explanation for XPS
 using Rx-queue(s) map

Signed-off-by: Amritha Nambiar <amritha.nambiar@...el.com>
---
 Documentation/ABI/testing/sysfs-class-net-queues |   11 ++++
 Documentation/networking/scaling.txt             |   61 ++++++++++++++++++----
 2 files changed, 61 insertions(+), 11 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-class-net-queues b/Documentation/ABI/testing/sysfs-class-net-queues
index 0c0df91..978b763 100644
--- a/Documentation/ABI/testing/sysfs-class-net-queues
+++ b/Documentation/ABI/testing/sysfs-class-net-queues
@@ -42,6 +42,17 @@ Description:
 		network device transmit queue. Possible vaules depend on the
 		number of available CPU(s) in the system.
 
+What:		/sys/class/<iface>/queues/tx-<queue>/xps_rxqs
+Date:		June 2018
+KernelVersion:	4.18.0
+Contact:	netdev@...r.kernel.org
+Description:
+		Mask of the receive queue(s) currently enabled to participate
+		into the Transmit Packet Steering packet processing flow for this
+		network device transmit queue. Possible values depend on the
+		number of available receive queue(s) in the network device.
+		Default is disabled.
+
 What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
 Date:		November 2011
 KernelVersion:	3.3
diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt
index f55639d..b7056a8 100644
--- a/Documentation/networking/scaling.txt
+++ b/Documentation/networking/scaling.txt
@@ -366,8 +366,13 @@ XPS: Transmit Packet Steering
 
 Transmit Packet Steering is a mechanism for intelligently selecting
 which transmit queue to use when transmitting a packet on a multi-queue
-device. To accomplish this, a mapping from CPU to hardware queue(s) is
-recorded. The goal of this mapping is usually to assign queues
+device. This can be accomplished by recording two kinds of maps, either
+a mapping of CPU to hardware queue(s) or a mapping of receive queue(s)
+to hardware transmit queue(s).
+
+1. XPS using CPUs map
+
+The goal of this mapping is usually to assign queues
 exclusively to a subset of CPUs, where the transmit completions for
 these queues are processed on a CPU within this set. This choice
 provides two benefits. First, contention on the device queue lock is
@@ -377,15 +382,40 @@ transmit queue). Secondly, cache miss rate on transmit completion is
 reduced, in particular for data cache lines that hold the sk_buff
 structures.
 
-XPS is configured per transmit queue by setting a bitmap of CPUs that
-may use that queue to transmit. The reverse mapping, from CPUs to
-transmit queues, is computed and maintained for each network device.
-When transmitting the first packet in a flow, the function
-get_xps_queue() is called to select a queue. This function uses the ID
-of the running CPU as a key into the CPU-to-queue lookup table. If the
+2. XPS using receive queues map
+
+This mapping is used to pick transmit queue based on the receive
+queue(s) map configuration set by the administrator. A set of receive
+queues can be mapped to a set of transmit queues (many:many), although
+the common use case is a 1:1 mapping. This will enable sending packets
+on the same queue associations for transmit and receive. This is useful for
+busy polling multi-threaded workloads where there are challenges in
+associating a given CPU to a given application thread. The application
+threads are not pinned to CPUs and each thread handles packets
+received on a single queue. The receive queue number is cached in the
+socket for the connection. In this model, sending the packets on the same
+transmit queue corresponding to the associated receive queue has benefits
+in keeping the CPU overhead low. Transmit completion work is locked into
+the same queue-association that a given application is polling on. This
+avoids the overhead of triggering an interrupt on another CPU. When the
+application cleans up the packets during the busy poll, transmit completion
+may be processed along with it in the same thread context and so result in
+reduced latency.
+
+XPS is configured per transmit queue by setting a bitmap of
+CPUs/receive-queues that may use that queue to transmit. The reverse
+mapping, from CPUs to transmit queues or from receive-queues to transmit
+queues, is computed and maintained for each network device. When
+transmitting the first packet in a flow, the function get_xps_queue() is
+called to select a queue. This function uses the ID of the receive queue
+for the socket connection for a match in the receive queue-to-transmit queue
+lookup table. Alternatively, this function can also use the ID of the
+running CPU as a key into the CPU-to-queue lookup table. If the
 ID matches a single queue, that is used for transmission. If multiple
 queues match, one is selected by using the flow hash to compute an index
-into the set.
+into the set. When selecting the transmit queue based on receive queue(s)
+map, the transmit device is not validated against the receive device as it
+requires expensive lookup operation in the datapath.
 
 The queue chosen for transmitting a particular flow is saved in the
 corresponding socket structure for the flow (e.g. a TCP connection).
@@ -404,11 +434,15 @@ acknowledged.
 
 XPS is only available if the kconfig symbol CONFIG_XPS is enabled (on by
 default for SMP). The functionality remains disabled until explicitly
-configured. To enable XPS, the bitmap of CPUs that may use a transmit
-queue is configured using the sysfs file entry:
+configured. To enable XPS, the bitmap of CPUs/receive-queues that may
+use a transmit queue is configured using the sysfs file entry:
 
+For selection based on CPUs map:
 /sys/class/net/<dev>/queues/tx-<n>/xps_cpus
 
+For selection based on receive-queues map:
+/sys/class/net/<dev>/queues/tx-<n>/xps_rxqs
+
 == Suggested Configuration
 
 For a network device with a single transmission queue, XPS configuration
@@ -421,6 +455,11 @@ best CPUs to share a given queue are probably those that share the cache
 with the CPU that processes transmit completions for that queue
 (transmit interrupts).
 
+For transmit queue selection based on receive queue(s), XPS has to be
+explicitly configured mapping receive-queue(s) to transmit queue(s). If the
+user configuration for receive-queue map does not apply, then the transmit
+queue is selected based on the CPUs map.
+
 Per TX Queue rate limitation:
 =============================
 

Powered by blists - more mailing lists