netdev - Re: [PATCH v4 7/8] net: phy: Add support to configure clock in Broadcom iProc mdio mux

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 1 Aug 2018 18:40:06 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     Arun Parameswaran <arun.parameswaran@...adcom.com>,
        "David S. Miller" <davem@...emloft.net>,
        Andrew Lunn <andrew@...n.ch>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Ray Jui <rjui@...adcom.com>,
        Scott Branden <sbranden@...adcom.com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will.deacon@....com>
Cc:     netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        bcm-kernel-feedback-list@...adcom.com
Subject: Re: [PATCH v4 7/8] net: phy: Add support to configure clock in
 Broadcom iProc mdio mux



On 08/01/2018 05:53 PM, Arun Parameswaran wrote:
> Add support to configure the internal rate adjust register based on the
> core clock supplied through device tree in the Broadcom iProc mdio mux.
> 
> The operating frequency of the mdio mux block is 11MHz. This is derrived
> by dividing the clock to the mdio mux with the rate adjust register.
> 
> In some SoC's the default values of the rate adjust register do not yield
> 11MHz. These SoC's are required to specify the clock via the device tree
> for proper operation.
> 
> Signed-off-by: Arun Parameswaran <arun.parameswaran@...adcom.com>

Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
-- 
Florian